Turn a 3.5" SATA Hard Drive into a UASP-supported USB (Universal Serial Bus) 3.0 External Hard Drive. The S3510SMU33 USB (Universal Serial Bus) 3.0 hard drive enclosure enables you to connect a 3.5in SATA hard drive through an available USB (Universal Serial Bus) port. With support for UASP, the enclosure performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0, when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. The HDD enclosure offers a versatile solution for increasing the storage/backup capabilities of your computer, with support for SATA I/II/III hard drives at capacities of up to 4TB. Plus, the enclosure features high-quality aluminum construction & a stylish silver design that looks great in any application. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP enabled Star Tech.com Enclosure, & a SATA III solid state drive. ...

Turn a 3.5" SATA Hard Drive into a UASP-supported USB (Universal Serial Bus) 3.0 External Hard Drive. The S3510SMU33 USB (Universal Serial Bus) 3.0 hard drive enclosure enables you to connect a 3.5in SATA hard drive through an available USB (Universal Serial Bus) port. With support for UASP, the enclosure performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0, when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. The HDD enclosure offers a versatile solution for increasing the storage/backup capabilities of your computer, with support for SATA I/II/III hard drives at capacities of up to 4TB. Plus, the enclosure features high-quality aluminum construction & a stylish silver design that looks great in any application. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP enabled Star Tech.com Enclosure, & a SATA III solid state drive. ...

Easily connect & swap two 2.5in SATA hard drives or SSDs through a single 3.5in front bay. The HSB225SATBK 3.5in SATA Mobile Rack lets you install two 2.5in SATA (SATA, SATA II, SATA III-6 Gbps) hard drives (HDD) or solid state drives (SSD) into an available/unused 3.5in floppy drive bay. The mobile rack delivers quick & easy access to hard drive contents, using a convenient "no mounting required/easy eject" feature which eliminates the need for the drives to be installed in a tray
- a time-saving solution for instant drive removals & insertions, as part of a system building process or integration into rackmount systems or industrial environments. To maximize performance & utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with compatible controller. To maximize performance & utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with compatible controller. For added safety, the mobile rack is made from UL94 V-0 rated plastics & equipped with locking bay doors to help prevent accidental or unauthorized removal of the swappable hard drives. Also a perfect addition for operating system image deployment & any task that requires being able to access large volumes of data on the fly, the hot swap bay provides everything you need to expedite important projects while maintaining a reliable storage solution.
...

Easily connect & swap two 2.5in SATA hard drives or SSDs through a single 3.5in front bay. The HSB225SATBK 3.5in SATA Mobile Rack lets you install two 2.5in SATA (SATA, SATA II, SATA III-6 Gbps) hard drives (HDD) or solid state drives (SSD) into an available/unused 3.5in floppy drive bay. The mobile rack delivers quick & easy access to hard drive contents, using a convenient "no mounting required/easy eject" feature which eliminates the need for the drives to be installed in a tray
- a time-saving solution for instant drive removals & insertions, as part of a system building process or integration into rackmount systems or industrial environments. To maximize performance & utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with compatible controller. To maximize performance & utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with compatible controller. For added safety, the mobile rack is made from UL94 V-0 rated plastics & equipped with locking bay doors to help prevent accidental or unauthorized removal of the swappable hard drives. Also a perfect addition for operating system image deployment & any task that requires being able to access large volumes of data on the fly, the hot swap bay provides everything you need to expedite important projects while maintaining a reliable storage solution.
...

Mount a 3.5in hard drive to any desktop with an available 5.25in bay. This Drive Bay Mounting Bracket Kit lets you mount a 3.5in hard drive in a 5.25in drive bay, allowing you to maximize the internal space-efficiency of your computer case. ...

Turn a 3.5in SATA drive into an external USB (Universal Serial Bus) 3.0 hard drive. The SAT3510U3VGB USB (Universal Serial Bus) 3.0 to SATA external hard drive enclosure allows almost any standard 3.5-inch internal SATA Hard Disk Drive (HDD) to be made into a cost-effective external Super Speed USB (Universal Serial Bus) 3.0 hard drive. With data transfer rates up to 5 Gbps (10 times faster than USB (Universal Serial Bus) 2.0), speed is no longer compromised for convenience, ease of use or portability. Large capacity drives (tested with up to 4TB) can be used to greatly enhance your computer's storage/backup capabilities. The USB (Universal Serial Bus) 3.0 HDD Enclosure is backward compatible with USB (Universal Serial Bus) 2.0, making it more than suitable for use with computers that don't yet have USB (Universal Serial Bus) 3.0 ports. The external enclosure will also power down SATA drives after a period of inactivity (USB mode only) or when the PC is turned off, to help reduce power consumption & noise when not being accessed. Constructed of sturdy, light-weight aluminum & no fans, the enclosure offers optimal & quiet cooling for even current, high-capacity hard drives
- an ideal external storage solution.
...

Backup & Transfer Data at Super Speed USB (Universal Serial Bus) 3.0 speeds. The SAT3510BU3 USB (Universal Serial Bus) 3.0 External Hard Drive Enclosure lets you connect a 3.5in SATA hard drive through USB (Universal Serial Bus) 3.0
- a cutting edge external storage solution that lets you harness the speed & performance supported by the Super Speed USB (Universal Serial Bus) interface. Large capacity drives (tested with up to 4TB) can be used to greatly enhance your computer's storage/backup capabilities. Supporting data transfer rates of up to 5 Gbps, this external HDD enclosure delivers access to files at lightning fast speeds
- 10x that of USB (Universal Serial Bus) 2.0, & 60% faster than SATA II e SATA. Plus, the USB (Universal Serial Bus) 3.0 interface is backward compatible with USB (Universal Serial Bus) revisions 2.0 & 1.1, so the enclosure can be used with older systems that don't support the newest USB (Universal Serial Bus) standard, at speeds of 480 Mbps & 12 Mbps (respectively). The drive enclosure features a compact, free-standing design that requires minimal desk space, & is equipped with an 80mm fan that helps keep the installed hard drive cool for peak performance. This versatile external storage solution is compatible with a broad range of Windows operating systems, as well as Linux & Mac OS X & up.

...

Backup & Transfer Data at Super Speed USB (Universal Serial Bus) 3.0 speeds. The SAT3510BU3 USB (Universal Serial Bus) 3.0 External Hard Drive Enclosure lets you connect a 3.5in SATA hard drive through USB (Universal Serial Bus) 3.0
- a cutting edge external storage solution that lets you harness the speed & performance supported by the Super Speed USB (Universal Serial Bus) interface. Large capacity drives (tested with up to 4TB) can be used to greatly enhance your computer's storage/backup capabilities. Supporting data transfer rates of up to 5 Gbps, this external HDD enclosure delivers access to files at lightning fast speeds
- 10x that of USB (Universal Serial Bus) 2.0, & 60% faster than SATA II e SATA. Plus, the USB (Universal Serial Bus) 3.0 interface is backward compatible with USB (Universal Serial Bus) revisions 2.0 & 1.1, so the enclosure can be used with older systems that don't support the newest USB (Universal Serial Bus) standard, at speeds of 480 Mbps & 12 Mbps (respectively). The drive enclosure features a compact, free-standing design that requires minimal desk space, & is equipped with an 80mm fan that helps keep the installed hard drive cool for peak performance. This versatile external storage solution is compatible with a broad range of Windows operating systems, as well as Linux & Mac OS X & up.

...

Turn a 3.5" SATA hard drive into an external hard drive with USB (Universal Serial Bus) 2.0 & Fire Wire connectivity. The SAT3510U2FGB External Hard Drive Enclosure supports both USB (Universal Serial Bus) 2.0 & Fire Wire 400 (IEEE1394a) host connections, providing the compatibility needed to create a convenient & versatile external SATA storage solution for desktop computers as well as Mac Books & Windows based laptops. Large capacity drives (tested with up to 4TB) can be used to greatly enhance your computers storage/backup capabilities. The USB/ Fire Wire enclosure features a slim, lightweight aluminum design &

Includes:: a 6-pin Fire Wire cable simplifying the option to connect through IEEE 1394a, as well as a USB (Universal Serial Bus) 2.0 cable for connecting to the host through USB (Universal Serial Bus).

...

Connect a 4-position headset with audio & microphone input to your desktop or laptop computer. The MUYHSFMM 4-Position 3.5mm to dual 3.5mm Headset Splitter Adapter features one 3.5mm Female & two 3.5mm Male connectors, enabling you to connect a 4-position headset with Audio & microphone input to your PC or Laptop. This 3.5mm Headset Splitter Adapter connects into both the audio & mic ports on your desktop or laptop computer, providing a single (4-Position) female connector
- a perfect solution for online gaming or use with VOIP applications (Skype, chat programs). Featuring a compact, yet sturdy design, the headset splitter delivers the perfect solution for applications that require portability, & takes up very little space in your laptop bag.
...