Add 2 Super Speed USB (Universal Serial Bus) 3.0 ports to your PCI Express-enabled PC. The PEXUSB3S25 2-Port PCI Express USB (Universal Serial Bus) 3.0 Card lets you add two USB (Universal Serial Bus) 3.0 ports to your PCI Express-enabled computer system, with an optional LP4 power connector to connect to your system power supply & deliver up to 900m A of power per port to USB (Universal Serial Bus) 3.0 bus-powered devices (500m A for USB (Universal Serial Bus) 2.0). Enhanced with UASP support (USB Attached SCSI Protocol), this USB (Universal Serial Bus) 3.0 controller performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP supported enclosure (Note: UASP is not supported by all operating systems). Using a more efficient protocol than the traditional USB (Universal Serial Bus) BOT (Bulk-Only Transport), UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data transfers. The PCIe USB (Universal Serial Bus) 3.0 adapter is compliant with USB (Universal Serial Bus) 3.0 standards for data transfer speeds up to 5 Gbps, while still offering backward compatibility with existing USB (Universal Serial Bus) 2.0 / 1.1 devices. For added versatility, the controller card is equipped with a standard profile bracket &

Includes:: a low-profile/half-height bracket for installation in small form-factor computers. UASP is supported in Windows 8, Server 2012 & Linux kernel 2.6.3 or later. In testing UASP performed with up to a 70% faster read / 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing, UASP also showed up to an 80% reduction in required processor resources. Test results were obtained using an Intel Ivy Bridge system, Star Tech.com add-on USB (Universal Serial Bus) 3.0 cards, a UASP-enabled Star Tech.com enclosure, & a SATA III solid state drive.

...

Add 2 Super Speed USB (Universal Serial Bus) 3.0 ports with SATA power to your PCI Express-enabled PC. The PEXUSB3S24 2-Port PCI Express USB (Universal Serial Bus) 3.0 Card lets you add two USB (Universal Serial Bus) 3.0 ports to your PCI Express-enabled computer system, with an optional SATA power connector to connect to your system power supply & deliver up to 900m A of power per port to USB (Universal Serial Bus) 3.0 bus-powered devices (500m A for USB (Universal Serial Bus) 2.0). Enhanced with UASP support (USB Attached SCSI Protocol), this USB (Universal Serial Bus) 3.0 controller performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP supported enclosure (Note: UASP is not supported by all operating systems). Using a more efficient protocol than the traditional USB (Universal Serial Bus) BOT (Bulk-Only Transport), UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data transfers. The PCIe USB (Universal Serial Bus) 3.0 adapter is compliant with USB (Universal Serial Bus) 3.0 standards for data transfer speeds up to 5 Gbps, while still offering backward compatibility with existing USB (Universal Serial Bus) 2.0 / 1.1 devices. For added versatility, the controller card is equipped with a standard profile bracket &

Includes:: a low-profile/half-height bracket for installation in small form-factor computers. UASP is supported in Windows 8, 8.1, Server 2012 & Linux kernel 2.6.37 or later. In testing UASP performed with up to a 70% faster read / 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing, UASP also showed up to an 80% reduction in required processor resources. Test results were obtained using an Intel Ivy Bridge system, Star Tech.com add-on USB (Universal Serial Bus) 3.0 cards, a UASP-enabled Star Tech.com enclosure, & a SATA III solid state drive.

...

Add 2 Super Speed USB (Universal Serial Bus) 3.0 ports with SATA power to your PCI Express-enabled PC. The PEXUSB3S24 2-Port PCI Express USB (Universal Serial Bus) 3.0 Card lets you add two USB (Universal Serial Bus) 3.0 ports to your PCI Express-enabled computer system, with an optional SATA power connector to connect to your system power supply & deliver up to 900m A of power per port to USB (Universal Serial Bus) 3.0 bus-powered devices (500m A for USB (Universal Serial Bus) 2.0). Enhanced with UASP support (USB Attached SCSI Protocol), this USB (Universal Serial Bus) 3.0 controller performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP supported enclosure (Note: UASP is not supported by all operating systems). Using a more efficient protocol than the traditional USB (Universal Serial Bus) BOT (Bulk-Only Transport), UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data transfers. The PCIe USB (Universal Serial Bus) 3.0 adapter is compliant with USB (Universal Serial Bus) 3.0 standards for data transfer speeds up to 5 Gbps, while still offering backward compatibility with existing USB (Universal Serial Bus) 2.0 / 1.1 devices. For added versatility, the controller card is equipped with a standard profile bracket &

Includes:: a low-profile/half-height bracket for installation in small form-factor computers. UASP is supported in Windows 8, 8.1, Server 2012 & Linux kernel 2.6.37 or later. In testing UASP performed with up to a 70% faster read / 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing, UASP also showed up to an 80% reduction in required processor resources. Test results were obtained using an Intel Ivy Bridge system, Star Tech.com add-on USB (Universal Serial Bus) 3.0 cards, a UASP-enabled Star Tech.com enclosure, & a SATA III solid state drive.

...

Add 2 high-speed IEEE 1284 parallel ports (EPP/ECP/SPP/PS2) to your desktop computer through a PCI Express expansion slot. The PEX2PECP2 2 Port PCI Express Parallel Adapter Card
- EPP/ECP/SPP/PS2 parallel card adds two IEEE 1284 parallel ports to your PC, with support for parallel data communication at speeds of up to 1.5 Mbps. This high performance 2 Port PCI Express parallel card adds 2 DB25 parallel ports, perfect for connecting printers, scanners, memory card readers, bar code scanners & more. With the added convenience of plug-&-play capability, installing the parallel adapter card is hassle-free. The PCIe Parallel card also

Includes:: both standard & half-height/low profile mounting brackets for compatibility with almost any system form factor.


...

Add 2 high-speed IEEE 1284 parallel ports (EPP/ECP/SPP/PS2) to your desktop computer through a PCI Express expansion slot. The PEX2PECP2 2 Port PCI Express Parallel Adapter Card
- EPP/ECP/SPP/PS2 parallel card adds two IEEE 1284 parallel ports to your PC, with support for parallel data communication at speeds of up to 1.5 Mbps. This high performance 2 Port PCI Express parallel card adds 2 DB25 parallel ports, perfect for connecting printers, scanners, memory card readers, bar code scanners & more. With the added convenience of plug-&-play capability, installing the parallel adapter card is hassle-free. The PCIe Parallel card also

Includes:: both standard & half-height/low profile mounting brackets for compatibility with almost any system form factor.


...

Add 2 e SATA ports to your desktop computer through a PCI Express expansion slot. This 2 Port PCI Express e SATA Controller Adapter Card offers simple connectivity between a host computer & e SATA devices. Providing two e SATA ports the adapter card offers a cost-effective solution for connecting hot-pluggable, high-speed storage, & in turn allows for easier data backups & archiving. With full support for SATA 300 (SATA II) hard drives & data transfer speeds of up to 3 Gbps, the adapter card features a native PCI Express single chipset that provides enhanced compatibility, reliability & performance for external SATA storage needs. The PCI Express e SATA controller card also features port multiplier capability with comm&-based switching for connecting multiple external hard drives to a host Windows system through a single external SATA connection. A dual profile solution, the e SATA controller card

Includes:: a low profile/half-height bracket for adapting to slimline or small form factor system applications.

...

Add 2 e SATA ports to your desktop computer through a PCI Express expansion slot. This 2 Port PCI Express e SATA Controller Adapter Card offers simple connectivity between a host computer & e SATA devices. Providing two e SATA ports the adapter card offers a cost-effective solution for connecting hot-pluggable, high-speed storage, & in turn allows for easier data backups & archiving. With full support for SATA 300 (SATA II) hard drives & data transfer speeds of up to 3 Gbps, the adapter card features a native PCI Express single chipset that provides enhanced compatibility, reliability & performance for external SATA storage needs. The PCI Express e SATA controller card also features port multiplier capability with comm&-based switching for connecting multiple external hard drives to a host Windows system through a single external SATA connection. A dual profile solution, the e SATA controller card

Includes:: a low profile/half-height bracket for adapting to slimline or small form factor system applications.

...

PCI Express to Firewire Adapter Fire Wire 400 Texas Instruments TSB82AA2. The PEX1394A2V 2-Port PCI Express Fire Wire Card lets you add two Fire Wire 400 ports to your desktop PC. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases. Future Proof Add Fire Wire to the latest computers with PCI Express slots. Keep using your legacy devices that would not otherwise be compatible with new computers. This allows you to connect IEEE 1394A Fire Wire devices such as digital cameras, external hard drives, DV camcorders, printers & more Wide Compatibility For broad compatibility, the PCIE firewire adapter is natively supported in Windows with no additional drivers required. The 2 port PCI Express 1394a Firewire Card comes equipped with a standard profile bracket &

Includes:: a low-profile/half-height bracket for installation in small form-factor computers. PCI Express to Firewire adapter is also compatible with mac OS 10.10 through 10.13. The Choice of IT Pros Since 1985 Star Tech.com conducts thorough compatibility & performance testing on all our products to ensure we are meeting or exceeding industry standards & providing high-quality products to IT Professionals. Our local Star Tech.com Technical Advisors have broad product expertise & work directly with our Star Tech.com Engineers to provide support for our customers both pre and post-sales. PEX1394A2V2 is backed by a Star Tech.com 2-year warranty & free, lifetime technical support.

...

Add 2 internal SATA 2.0 ports to your desktop computer through a PCI Express expansion slot. This 2 Port PCI Express Internal Serial ATA Controller Card adds two internal SATA II (SATA /300) ports to a computer through simple installation into an available 1x PCI Express slot. Supporting data transfer speeds of up to 3.0 Gbps, the SATA controller card features Port Multiplier support with comm&-based switching as well as Native Command Queuing to ensure optimum performance. Using a native PCI Express single chipset, the internal SATA controller card provides enhanced compatibility, reliability & performance for your external storage needs. The controller card also features Port Multiplier support with command based switching for connecting multiple external hard drives to a host computer through one e SATA connection. The controller card

Includes:: both standard form factor & low profile brackets, allowing you to add SATA capability to virtually any PCI Express enabled computer, regardless of the case form factor.

...

Add two USB (Universal Serial Bus) 3.0 ports to your desktop computer through a PCI Express slot. The PEXUSB3S23 2-Port PCI Express USB (Universal Serial Bus) 3.0 Card lets you add two USB (Universal Serial Bus) 3.0 ports to any PCI Express-enabled computer system. The USB (Universal Serial Bus) card requires SATA power for functionality, & delivers 900m A of power per port to USB (Universal Serial Bus) 3.0 bus-powered devices (500m A for USB (Universal Serial Bus) 2.0) via your computers SATA power connector. The PCIe USB (Universal Serial Bus) 3.0 adapter is compliant with USB (Universal Serial Bus) 3.0 standards for data transfer speeds up to 5 Gbps, while still offering backward compatibility with existing USB (Universal Serial Bus) 2.0 / 1.1 devices. For added versatility, the controller card is equipped with a standard profile bracket &

Includes:: a low-profile/half-height bracket for installation in small form-factor computers.

...