Convert & extend a 10/100 Mbps Ethernet connection up to 18.6 miles/30km over Single Mode SC fiber. The ET90110SM302 10/100 Mbps Single Mode Fiber Media Converter SC (30 km) lets you extend a Fast Ethernet network (10/100) over single mode fiber, at distances up to 30 km (18.6 miles). A cost-effective solution for connecting a 10/100 Mbps Ethernet (10/100 Base-T) network to remote network segments over a 100 Base-FX fiber backbone, the media converter is designed to offer a durable & convenient Ethernet to fiber solution, with an all-steel chassis, & simple plug-&-play installation with minimal configuration required. For added versatility, this fiber media converter supports standalone operation, or installation into the 20 Slot, 2U Rackmount Chassis (ETCHS2U). ...

Convert & extend a 10/100 Mbps Ethernet connection up to 18.6 miles/30km over Single Mode SC fiber. The ET90110SM302 10/100 Mbps Single Mode Fiber Media Converter SC (30 km) lets you extend a Fast Ethernet network (10/100) over single mode fiber, at distances up to 30 km (18.6 miles). A cost-effective solution for connecting a 10/100 Mbps Ethernet (10/100 Base-T) network to remote network segments over a 100 Base-FX fiber backbone, the media converter is designed to offer a durable & convenient Ethernet to fiber solution, with an all-steel chassis, & simple plug-&-play installation with minimal configuration required. For added versatility, this fiber media converter supports standalone operation, or installation into the 20 Slot, 2U Rackmount Chassis (ETCHS2U). ...

This Ethernet to MM Fiber Media Converter creates a cost-effective Ethernet to fiber link, transparently converting to/from 10 Base-T or 100 Base-Tx Ethernet signals & 100 Base-Fx optical signals to extend an Ethernet network connection over a multimode fiber backbone. The converter supports a maximum multimode fiber optic cable distance of 2km (1.2 miles), providing a simple solution for connecting 10 Base-T/100 Base-Tx Ethernet networks to remote locations using ST-terminated multimode fiber, while delivering solid network performance & scalability. Easy to setup & install, this compact, value-conscious media converter features auto-switching MDI & MDI-X support on the RJ45 UTP connections as well as manual controls for UTP mode, speed, Full & Half Duplex, as well as LFP (Link Fault pass-through) on/off. ...

This Ethernet to MM Fiber Media Converter creates a cost-effective Ethernet to fiber link, transparently converting to/from 10 Base-T or 100 Base-Tx Ethernet signals & 100 Base-Fx optical signals to extend an Ethernet network connection over a multimode fiber backbone. The converter supports a maximum multimode fiber optic cable distance of 2km (1.2 miles), providing a simple solution for connecting 10 Base-T/100 Base-Tx Ethernet networks to remote locations using ST-terminated multimode fiber, while delivering solid network performance & scalability. Easy to setup & install, this compact, value-conscious media converter features auto-switching MDI & MDI-X support on the RJ45 UTP connections as well as manual controls for UTP mode, speed, Full & Half Duplex, as well as LFP (Link Fault pass-through) on/off. ...

Add a 10/100 Mbps Ethernet port to a desktop computer through a PCI slot. This 1 port PCI Fast Ethernet Network Adapter Card offers a reliable, cost-effective Ethernet network connection. Delivering a simple connection to 10/100 Mbps Ethernet networks, the NIC features auto-negotiation that senses speed & duplex capabilities of connected devices & full duplex support for data transfer rates up to 200 Mbps. A versatile network interface solution, the NIC is supported by all popular operating systems including Windows, Linux, Mac OS & Novell platforms. ...

The POESPLT100 10/100 Mbps Po E Power over Ethernet Splitter with 5-12V Output separates the data & power connections received from your Power Sourcing Equipment (PSE) such as a single port Po E injector or a Po E Switch. At the remote end of your Po E connection, the POESPLT100 gives you a standard DC jack with selectable 5, 7.5, 9 or 12V output & separate Ethernet data connection allowing you to take advantage of power of Ethernet infrastructure, & use a variety of peripherals in places where no wall outlet exists. ...

The POESPLT100 10/100 Mbps Po E Power over Ethernet Splitter with 5-12V Output separates the data & power connections received from your Power Sourcing Equipment (PSE) such as a single port Po E injector or a Po E Switch. At the remote end of your Po E connection, the POESPLT100 gives you a standard DC jack with selectable 5, 7.5, 9 or 12V output & separate Ethernet data connection allowing you to take advantage of power of Ethernet infrastructure, & use a variety of peripherals in places where no wall outlet exists. ...

Extend your 10/100 Mbps network by up to 1km over Ethernet or RJ11 phone lines. The 110VDSLEXTGB VDSL Ethernet extender kit means that you can span a 10/100 network over extremely long distances (up to 1km) while still maintaining high-speed network connectivity. The device means that you can run the connection over standard RJ45 cabling, existing RJ11 phone lines, or any other set of single pair wires. The VDSL (VDSL2) kit is simple to install & provides an out-of-the-box solution as both the Ethernet-VDSL extender & receiver units are included. A perfect solution for a broad range of applications including connecting isolated user stations within the same building or between separate buildings, or overcoming infrastructure obstacles & distances (e.g. older stone/concrete architecture) where new wiring or wireless may be impossible. The VDSL Ethernet LAN Extender kit helps to eliminate expense by allowing video streaming & data to share the same telephone pair without interference. The 110VDSLEXT requires only a single pair of wires to function, while offering the ability to use multiple sets of the devices to create several simultaneous connections to your remote building. In these multiple set configurations, you have the ability to use up to 4 sets over a single Cat 5e or Cat 6 cable which can be used as separate LAN (or VLAN) connections, or bridged into a trunk line for additional speed/bandwidth over long distances (up to two sets only over standard Cat 5). ...

Extend your 10/100 Mbps network by up to 1km over Ethernet or RJ11 phone lines. The 110VDSLEXTGB VDSL Ethernet extender kit means that you can span a 10/100 network over extremely long distances (up to 1km) while still maintaining high-speed network connectivity. The device means that you can run the connection over standard RJ45 cabling, existing RJ11 phone lines, or any other set of single pair wires. The VDSL (VDSL2) kit is simple to install & provides an out-of-the-box solution as both the Ethernet-VDSL extender & receiver units are included. A perfect solution for a broad range of applications including connecting isolated user stations within the same building or between separate buildings, or overcoming infrastructure obstacles & distances (e.g. older stone/concrete architecture) where new wiring or wireless may be impossible. The VDSL Ethernet LAN Extender kit helps to eliminate expense by allowing video streaming & data to share the same telephone pair without interference. The 110VDSLEXT requires only a single pair of wires to function, while offering the ability to use multiple sets of the devices to create several simultaneous connections to your remote building. In these multiple set configurations, you have the ability to use up to 4 sets over a single Cat 5e or Cat 6 cable which can be used as separate LAN (or VLAN) connections, or bridged into a trunk line for additional speed/bandwidth over long distances (up to two sets only over standard Cat 5). Package

Includes::
- 1 Extender, 1 Receiver, 2 RJ45 to VSDL cable, 2 Power Supply Units, 1 Instruction Manual


...

Extend your 10/100 Mbps network by up to 1km over Ethernet or RJ11 phone lines. The 110VDSLEXTGB VDSL Ethernet extender kit means that you can span a 10/100 network over extremely long distances (up to 1km) while still maintaining high-speed network connectivity. The device means that you can run the connection over standard RJ45 cabling, existing RJ11 phone lines, or any other set of single pair wires. The VDSL (VDSL2) kit is simple to install & provides an out-of-the-box solution as both the Ethernet-VDSL extender & receiver units are included. A perfect solution for a broad range of applications including connecting isolated user stations within the same building or between separate buildings, or overcoming infrastructure obstacles & distances (e.g. older stone/concrete architecture) where new wiring or wireless may be impossible. The VDSL Ethernet LAN Extender kit helps to eliminate expense by allowing video streaming & data to share the same telephone pair without interference. The 110VDSLEXT requires only a single pair of wires to function, while offering the ability to use multiple sets of the devices to create several simultaneous connections to your remote building. In these multiple set configurations, you have the ability to use up to 4 sets over a single Cat 5e or Cat 6 cable which can be used as separate LAN (or VLAN) connections, or bridged into a trunk line for additional speed/bandwidth over long distances (up to two sets only over standard Cat 5). Package

Includes::
- 1 Extender, 1 Receiver, 2 RJ45 to VSDL cable, 2 Power Supply Units, 1 Instruction Manual


...