Extend HDMI video & audio over SC Multi Mode fiber, with Infrared control. The ST121HDFXA is a long-range HDMI video extender kit that uses SC fiber optic cable to extend video/audio from an HDMI-equipped device to a remote display up to 2600 feet (800 Meters) away. The extender supports full High-Definition video (1920x 1200 / 1080p) &

Includes:: both the transmitter & receiver, for a complete ready-to-use digital signage solution. Not only is this an incredibly long range solution that can extend an HDMI signal across or between buildings, but because fiber optics transmit data using light rather than copper, it will not cause or be effected by electromagnetic Interference (EMI). For convenient, time-saving control of the media source, the HDMI extender also offers Infrared (IR) extension, which enables you to control the HDMI audio-video source from either end of the connection. The kit also

Includes:: optional mounting hardware for a clean & professional installation.



...

Extend HDMI video & audio over SC Multi Mode fiber, with Infrared control. The ST121HDFXA is a long-range HDMI video extender kit that uses SC fiber optic cable to extend video/audio from an HDMI-equipped device to a remote display up to 2600 feet (800 Meters) away. The extender supports full High-Definition video (1920x 1200 / 1080p) &

Includes:: both the transmitter & receiver, for a complete ready-to-use digital signage solution. Not only is this an incredibly long range solution that can extend an HDMI signal across or between buildings, but because fiber optics transmit data using light rather than copper, it will not cause or be effected by electromagnetic Interference (EMI). For convenient, time-saving control of the media source, the HDMI extender also offers Infrared (IR) extension, which enables you to control the HDMI audio-video source from either end of the connection. The kit also

Includes:: optional mounting hardware for a clean & professional installation.



...

Broadcast your HDMI signal to multiple locations throughout your site, using your existing network infrastructure. The HDMI over IP extender kit makes it easy for you to distribute HDMI to a remote display using your local area network. You can also use additional receivers (ST12MHDLNHR, sold separately) to distribute HDMI to multiple locations. Unlike some video-over-IP solutions that consume your bandwidth, this HDMI over IP kit uses advanced compression to distribute high-quality HDMI video over your network, with minimal bandwidth requirements. Extending your HDMI signal using video compression saves your network resources, avoiding the hassle of a separate video network. The HDMI over IP kit can be scaled to meet your specific needs. In a point-to-multipoint setup, you can route your HDMI signal to as many displays as you need, using additional receivers. For additional scalability, you can combine up to 99 different kits to create a multipoint-to-multipoint setup, where you can route different HDMI source signals to different displays. Mounting hardware & IR extenders are included for each transmitter & receiver to ensure tidy, professional installation & hassle-free remote operation. The HDMI over IP kit maintains your HD video quality, supporting resolutions up to 1080p & making it easy to distribute dynamic digital signage throughout your site to attract customers. ...

Extend HDMI over IP using standard UTP/STP networking equipment
- Extend to multiple displays using additional Receiver Units.
...

Deploy content for digital signage through a scalable distribution system with intuitive control & USB (Universal Serial Bus) extension that's ideal for point-to-point or video wall applications. This HDMI over IP kit lets you extend an HDMI signal, as well as four USB (Universal Serial Bus) peripheral device connections, over your network. You can use additional receivers (sold separately) to distribute the HDMI & USB (Universal Serial Bus) signals to multiple locations & combine your remote displays to create a video wall while using the USB (Universal Serial Bus) connection to extend a touch screen to create an interactive digital signage presentation. In a point-to-multipoint setup, you can connect the HDMI over IP kit through an unmanaged or managed Gigabit LAN portal. You can also connect one or several sources (transmitters) to multiple displays (receivers) over your network, using a managed Gigabit Ethernet switch with IGMP. For further scalability, you can combine up to 16 different extender kits. For smaller-scale applications, you can use the extender kit as a point-to-point video extender by connecting the transmitter & receiver units directly over Cat 5 or Cat 6 cabling for a one-to-one HDMI extension up to 330 feet (100 meters). This HDMI distribution kit features an easy-to-use video control software app that helps you manage your IP video distribution. The app is simple to set up, with automatic hardware detection, & it lets you switch video sources for each remote display. You can also create & manage a video wall, for an impressive digital signage presentation that's sure to catch your audience's attention. The software is available on i OS for your iPhone or iPad, Android for your smartphone or tablet, & Google Chrome browser. The HDMI over IP extender kit

Includes:: optional mounting hardware for a tidy installation. Ideal for high-definition applications, the extender supports 1080p video resolutions & digital stereo audio. Plus, because the extender uses standard non-proprietary Cat 5e or Cat 6 Ethernet cable w

...

Deploy HDMI over LAN & get a video over IP solution that's scalable & features intuitive control that's ideal for your video wall or other digital signage application. This HDMI over IP extender gives you the flexibility to locate digital signage displays where you need them. Using your local network to extend a 4K HDMI signal, you can seamlessly distribute video to multiple displays from multiple source devices. This makes it easy to position your displays, or create a video wall, for maximum audience impact You can add (sold separately) to distribute your HDMI signal to multiple locations. You can also create a video wall & combine your video source across multiple displays. The IP receiver also features RS-232 extension which enables you to add a remote serial-operated device at your video source or at each remote display. This HDMI over IP extender is the perfect solution for combining a serial-operated touchscreen with your display or video wall, to create interactive digital signage presentation. In a point-to-multipoint setup, you can connect the HDMI over IP kit through an unmanaged or managed Gigabit LAN portal. You can also connect one or several sources (transmitters) to multiple displays (receivers) over your network, using a Gigabit Ethernet switch with IGMP. For further scalability, you can combine up to 16 total extender kits. The extender also features a separate 3.5 mm audio source that enables you to switch between the native HDMI audio & a separate 3.5 mm audio source, so you can distribute a single audio source to multiple remote locations over IP (also requires a Gigabit Ethernet switch with IGMP). For smaller-scale applications, you can use the extender kit as a point-to-point video extender by connecting the transmitter & receiver units directly over Cat 5 or Cat 6 cabling for a one-to-one HDMI extension up to 330 feet (100 meters). In this configuration, a separate 3.5 mm audio source can also be extended to a separate ...

Use with ST12MHDLAN to extend HDMI Over IP to additional displays. The ST12MHDLANRX HDMI over IP Receiver works with the ST12MHDLAN HDMI over IP Extender Kit to extend the HDMI audio/video signal to an additional display or projector through a Gigabit LAN Network for a Point-to-Multi Point installation. Up to 100 additional Receivers can be added to a single Network, allowing for a highly scalable installation. In a point-to-multipoint configuration, the ST12MHDLAN & ST12MHDLANRX (sold separately) can be connected through an unmanaged or managed Gigabit LAN portal to span the entire distance of your network, allowing you to connect one source (transmitter) to multiple displays (receivers) over IP. When used with a managed Gigabit Ethernet switch (with IGMP) you can connect up to 100 displays on a local area network. For added scalability, up to 16 different ST12MHDLAN Transmitter units can be added to a single network (IGMP / Managed Network Switch required) with up to 100 displays in total. Each ST12MHDLANRX Receiver

Includes:: optional mounting hardware for a professional & tidy installation. Plus, because the extender uses standard non-proprietary Cat 5e/ Cat 6 Ethernet cable with RJ45 connectors, it eliminates both the expense & hassle of running specialized cables. Ideal for High-Definition applications, the Receiver supports 1080p video resolutions, stereo audio & features EDID Copy, which ensures native resolution & maximum compatibility with your display or projector, for a convenient plug-&-play installation. Please Note: If using more than 1 Transmitter or more than 4 Receivers an IGMP/ Managed Network Switch is recommended for optimal performance. Non-managed network switches may also limit the performance of other devices connected to the same network.

...

This HDMI over IP receiver works with the HDMI Over IP Extender Kit (ST12MHDLAN2K, sold separately) & an Ethernet switch (sold separately), to receive HDMI video over your local area network (LAN) in remote locations, using Cat 5 or Cat 6 cabling. You can use additional receivers to distribute the HDMI signal to multiple locations or combine your remote displays to create a video wall. In a point-to-multipoint (one source to many screens) or multipoint-to-multipoint (many sources to many screens) configuration, you can output video to over 100 additional displays. Each display requires a receiver. Remote control of serial devices is supported through RS232 extension. With support for video resolution up to 1080p (1920 x 1080 at 60 Hz), the transmitter also supports digital & analog audio to the receiver & analog audio from the receiver to the transmitter. The kit

Includes:: an easy-to-use online app to manage your IP video distribution. The app is available on i OS for your iPhone or iPad, Android for your smartphone or tablet, & Google Chrome browser for your desktop. The HDMI over IP receiver

Includes:: optional shelf-mounting hardware. It uses Cat 5e or Cat 6 cables & works with existing network infrastructures, eliminating the expense of running proprietary cables.



...

This HDMI over IP extender lets you share an HDMI display or projector with the wireless or wired computer on your network. With intuitive controls & effortless screen sharing, this extender makes it easier than ever for users to collaborate & deliver presentations in boardrooms & office meetings. The IP video extender supports resolutions up to 1080p & features two built-in USB (Universal Serial Bus) ports, enabling you to connect remote USB (Universal Serial Bus) devices to your computer from your display. It's the perfect solution for controlling a computer from wherever the adapter is located. The IP video extender helps you boost your office productivity, by making it easier for users to collaborate & communicate. The included software lets you connect multiple computers & easily switch between which user is sharing their content with the HDMI display, unlike some wireless video systems that are difficult to configure & require users to disconnect & reconnect manually. You can even use the video-over-IP extender to share information with a remote audience, such as connecting to a remote display over an office LAN, to hold remote meetings while you're in another part of the office. With this IP video extender, you can turn your HDMI television, monitor or projector into an IP display that can connect to any Windows computer on your network, making it perfect for conference rooms & classrooms where different ideas are shared by users who bring their own computers. With a built-in USB (Universal Serial Bus) hub, you can use your computer to access two remote USB (Universal Serial Bus) devices at your remote display, enabling you or your customers to control the computer from the remote location. Remote operation can be used to create interactive digital signage, to engage your customers. Or, if you're using the video-over-IP extender as part of your IT infrastructure, you can use the USB (Universal Serial Bus) extender to add a remote KVM console that you can use to control your server from a remote location. ...

Extend HDMI up to 230ft (70m) over a single CAT5e/6 cable with Power over Cable to Receiver. The ST121HDBTE HDMI over CAT5e/6 Video Extender kit lets you extend HDMI video & audio up to 230 feet (70 Meters) over a single Cat 5e/6 cable. For added versatility, both the Transmitter & Receiver can be powered by the same single power source using Power Over Cable (POC). With support for High-Definition resolutions of up to 1920x 1080 & the accompanying digital audio, this cost-effective HD extender is a plug-&-play solution that can easily be installed using new or existing Ethernet infrastructure wiring. Plus, with Power Over Cable both Transmitter & Receiver can be powered using a single power adapter that can be connected to either device. The HDMI over Cat 6 Video Extender kit

Includes:: both the local transmitter & remote receiver units, plus mounting hardware
- perfect for point-to-point digital signage applications that require high quality HDMI video, & a tidy, professional installation. For additional distance, HDMI cables up to 32-feet (10-meters) in length can be used on the local & remote end.


...