More From Contributor

Engineered & tested to deliver extreme performance, Kingston Hyper X easily endures the most rigorous demands of any creative professional, gamer or PC enthusiast. ** Hyper X® FURY DDR4** Automatic overclocking for X99 platforms Hyper X® FURY DDR4 can handle even the toughest battle. It automatically recognises its host platform & overclocks to the highest frequency published (up to 2666 M Hz 1) -- so you can wreak havoc. FURY DDR4 runs at 1.2V, even at 2666 M Hz, so it stays cooler while you play. You don't need to alter the voltage to reach higher speeds, which means there's more power for other hardware in the system. FURY's sleek, asymmetrical black heat spreader provides enhanced thermal dissipation to help keep your cool & help you stand out from the crowd. Automatic overclocking -- up to 2666 M Hz CAS latency CL14-CL15 Low power consumption -- 1.2V Optimised for Intel's X99 chipset DDR4 is not compatible with older Intel or AMD chipsets ** Benefits** Easy to install -- plug-&-play functionality Automatic overclocking -- reach faster speeds & higher capacities just by installing the memory, no adjustments in BIOS needed Cost-efficient -- the perfect combination of price & DDR4 performance Unique -- asymmetrical, signature FURY heat spreader Design -- low-profile, black heat spreader colour & matching PCB Reliable -- 100% factory tested Compatible -- tested with all popular brands of motherboards Guaranteed -- lifetime warranty, free technical support ...

Archived Product

Kingstons KHX1600C9S3P1K2/4G is a kit of two 256M x 64-bit (2GB) DDR3-1600 CL9 SDRAM (Synchronous DRAM) 1 Rx 8 memory modules, based on eight 256M x 8-bit DDR3 FBGA components per module. Total kit capacity is 4GB. Each module kit has been tested to run at JEDEC DDR3-1600 at a low latency timing of 9-9-9 at 1.5V. Additional timing parameters are shown in the Pn P Timing Parameters section. Each 204-pin SODIMM uses gold contact fingers & requires +1.5V. **FEATURES**
- JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
- VDDQ = 1.5V (1.425V ~ 1.575V)
- 800 M Hz f CK for 1600 Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 11, 10, 9, 8, 7, 6, 5
- Posted CAS
- Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock
- Programmable CAS Write Latency (CWL) = 8 (DDR3-1600)
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
- Bi-directional Differential Data Strobe
- Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%)
- On Die Termination using ODT pin
- Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
- Asynchronous Reset
- PCB: Height 1.180" (30.00mm), double sided component

...

Archived Product

Kingston's KHX1600C9S3P1K2/4G is a kit of two 256M x 64-bit (2GB) DDR3-1600 CL9 SDRAM (Synchronous DRAM) 1 Rx 8 memory modules, based on eight 256M x 8-bit DDR3 FBGA components per module. Total kit capacity is 4GB. Each module kit has been tested to run at JEDEC DDR3-1600 at a low latency timing of 9-9-9 at 1.5V. Additional timing parameters are shown in the Pn P Timing Parameters section. Each 204-pin SODIMM uses gold contact fingers & requires +1.5V. **FEATURES**
- JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
- VDDQ = 1.5V (1.425V ~ 1.575V)
- 800 M Hz f CK for 1600 Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 11, 10, 9, 8, 7, 6, 5
- Posted CAS
- Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock
- Programmable CAS Write Latency (CWL) = 8 (DDR3-1600)
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
- Bi-directional Differential Data Strobe
- Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%)
- On Die Termination using ODT pin
- Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
- Asynchronous Reset
- PCB: Height 1.180" (30.00mm), double sided component

...

Archived Product

Kingstons KHX1866C11S3P1K2/4G is a kit of two 256M x 64- bit (2GB) DDR3-1866 CL11 SDRAM (Synchronous DRAM) 1 Rx 8 memory modules, based on eight 256M x 8-bit DDR3 FBGA components per module. Total kit capacity is 4GB. Each module kit has been tested to run at JEDEC DDR3-1866 at a low latency timing of 11-11-11 at 1.5V. Additional timing parameters are shown in the Pn P Timing Parameters section. Each 204-pin SODIMM uses gold contact fingers & requires +1.5V. **FEATURES**
- JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
- VDDQ = 1.5V (1.425V ~ 1.575V)
- 933 M Hz f CK for 1866 Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 11, 10, 9, 8, 7, 6, 5
- Posted CAS
- Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock
- Programmable CAS Write Latency (CWL) = 9 (DDR3-1866)
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
- Bi-directional Differential Data Strobe
- Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%)
- On Die Termination using ODT pin
- Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
- Asynchronous Reset
- PCB: Height 1.180" (30.00mm), double sided component

...

Archived Product

Kingston's KHX1866C11S3P1K2/4G is a kit of two 256M x 64- bit (2GB) DDR3-1866 CL11 SDRAM (Synchronous DRAM) 1 Rx 8 memory modules, based on eight 256M x 8-bit DDR3 FBGA components per module. Total kit capacity is 4GB. Each module kit has been tested to run at JEDEC DDR3-1866 at a low latency timing of 11-11-11 at 1.5V. Additional timing parameters are shown in the Pn P Timing Parameters section. Each 204-pin SODIMM uses gold contact fingers & requires +1.5V. **FEATURES**
- JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
- VDDQ = 1.5V (1.425V ~ 1.575V)
- 933 M Hz f CK for 1866 Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 11, 10, 9, 8, 7, 6, 5
- Posted CAS
- Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock
- Programmable CAS Write Latency (CWL) = 9 (DDR3-1866)
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
- Bi-directional Differential Data Strobe
- Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%)
- On Die Termination using ODT pin
- Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
- Asynchronous Reset
- PCB: Height 1.180" (30.00mm), double sided component

...

Archived Product

Kingstons KHX1600C9D3P1K2/8G is a kit of two 512M x 64-bit (4GB) DDR3-1600 CL9 SDRAM (Synchronous DRAM) memory modules, based on sixteen 256M x 8-bit DDR3 FBGA components per module. Total kit capacity is 8GB. Each module kit has been tested to run at JEDEC DDR3-1600 at a low latency timing of 9-9-9 at 1.5V. Additional timing parameters are shown in the Pn P Timing Parameters section. Each 240-pin DIMM uses gold contact fingers & requires +1.5V. Note: Pn P implementation is only possible in configurations that include a BIOS that supports the Pn P function. Your maximum speed will be determined by your BIOS. **FEATURES**
- JEDEC standard 1.5V ± 0.075V Power Supply
- VDDQ = 1.5V ± 0.075V
- 800 M Hz f CK for 1600 Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 5, 6, 7, 8, 9, 10, 11
- Posted CAS
- Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock
- Programmable CAS Write Latency (CWL) = 8 (DDR3- 1600)
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
- Bi-directional Differential Data Strobe
- Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%)
- On Die Termination using ODT pin
- Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
- Asynchronous Reset
- PCB: Height 1.18" (30.00mm) double sided component
- Ro HS Compliant

...

Archived Product

Kingston HyperX FURY SSD 480GB SATA3 2.5 With Adaptor

**HyperX FURY SSD** HyperX® FURY SSD offers high performance at an affordable price, to get you in the game faster and improve boot times, application loading and file execution. Maps and levels in games load faster with increased frames per second, thanks to its SandForce® SF-2281 controller with SATA Rev 3.0 (6Gb/s) performance and read/write speeds of 500/500MB/s. HyperX FURY comes in a slim, 7mm SSD form factor to fit in most standard 2.5" notebook storage slots. Kingston's HyperX SSD combines the SandForce controller technology with premium NAND flash, reducing load times while increasing performance and endurance. It provides high-speed SATA Rev 3.0 transfer speeds for larger bandwidth, which power users require for advanced gaming, multitasking and multimedia computing
power. Kingston's HyperX SSD lets users load games and applications faster, increase frames per second (FPS) and quickly transfer and edit large media files. It's cool, silent and requires less power and no additional cooling requirements. When configuring the HyperX SSD partition, the user can choose between having the maximum available capacity for data storage or giving up a little space to increase performance and endurance. This additional space is called over provisioning on an SSD. The amount of performance and endurance increase depends upon the type of data being stored on the HyperX SSD. The more data that is MPEG, JPG, ZIP or ARC file types, the greater the benefit for this increased over provisioning. HyperX SSD uses an advanced wear leveling technology that distributes
writes evenly across all the flash blocks in the SSD to maximize overall drive endurance. Additionally, wear leveling ensures that the individual flash memory blocks are consumed at a very balanced rate, not to exceed a 2-percent difference between the most often written blocks and least written. This enables the HyperX SSD to provide the longest possible life for the user while maintainin

Availability: Out Of Stock
Supplier: BT Business Direct
SKU: C4F2ZS00

Description Reviews / Comments Add New

Product Description

** Hyper X FURY SSD** Hyper X® FURY SSD offers high performance at an affordable price, to get you in the game faster & improve boot times, application loading & file execution. Maps & levels in games load faster with increased frames per second, thanks to its Sand Force® SF-2281 controller with SATA Rev 3.0 (6 Gb/s) performance & read/write speeds of 500/500MB/s. Hyper X FURY comes in a slim, 7mm SSD form factor to fit in most standard 2.5" notebook storage slots. Kingston's Hyper X SSD combines the Sand Force controller technology with premium NAND flash, reducing load times while increasing performance & endurance. It provides high-speed SATA Rev 3.0 transfer speeds for larger bandwidth, which power users require for advanced gaming, multitasking & multimedia computing power. Kingston's Hyper X SSD lets users load games & applications faster, increase frames per second (FPS) & quickly transfer & edit large media files. It's cool, silent & requires less power & no additional cooling requirements. When configuring the Hyper X SSD partition, the user can choose between having the maximum available capacity for data storage or giving up a little space to increase performance & endurance. This additional space is called over provisioning on an SSD. The amount of performance & endurance increase depends upon the type of data being stored on the Hyper X SSD. The more data that is MPEG, JPG, ZIP or ARC file types, the greater the benefit for this increased over provisioning. Hyper X SSD uses an advanced wear leveling technology that distributes writes evenly across all the flash blocks in the SSD to maximize overall drive endurance. in addition, wear leveling ensures that the individual flash memory blocks are consumed at a very balanced rate, not to exceed a 2-percent difference between the most often written blocks & least written. This enables the Hyper X SSD to provide the longest possible life for the user while maintainin

Reviews/Comments

Add New

Jargon Buster

ZIP - A device (Usualy Metal) used for temporarily attaching two pieces of fabric together

SATA - Serial Advanced Technology Attachment - a connection type for additional drives

MPEG - Moving Picture Experts Group - A group which sets standards for audio and video compression

speed - A measurement of how fast an object travels between two points

Large - something that takes up more space than normal.

Zip - A Fastening which can open and close to get inside.

Endurance - A measurement on how long something can last wear and tear.

Affordable - Something that is within a set price range that can be afforded due to its reasonable price.

Slots - A narrow opening which something can be inserted into, or a machine commonly found in casinos to win money and tokens.

Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.

Individual - A single separate item or person.

Memory - A way to describe the way in which the brain can remember things.

More From Contributor

Kingston HyperX FURY SSD 480GB SATA3 2.5 With Adaptor

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account