The NETGEAR Pro Safe 16-AP Wireless Management System is an easy to use appliance to simplify the set up & management of wireless networks. Supporting up to 16 access points, the WMS5316 Wireless Management System provides a single location to configure & manage the entire wireless network. Designed for growing companies who dont want the complexity & cost of full wireless controllers, the WMS5316 Wireless Management System delivers centralized management, load balancing, RF management, & guest access via an intuitive interface. Priced far below a full wireless controller, the WMS5316 Wireless Management System provides significant time savings & simplifies the deployment & management of a wireless network. Mimicking the set up process of a single access point, the easy to use WMS5316 Wireless Management System enables even novice users to adopt a centralized management architecture for up to 16 access points. With automatic discovery of all supported access points in the network, the WMS5316 Wireless Management System speeds the configuration of a the wireless network. Automatic Radio Frequency (RF) management & channel selection takes care of optimizing the access points in the network for maximum connectivity, without intervention from the network administrator. A single entry of wireless parameters & security settings can then be pushed out to all of the access points, enabling a fully functional wireless network in minutes. The WMS5316 Wireless Management System monitors the wireless network to ensure optimal performance & respond to changes in the RF environment. It will automatically re-assign channels & adjust RF parameters for maximum connectivity. If enabled, load-balancing on Pro Safe Access Points can ensure that no single access point is overloaded continuously, by diverting clients to nearby access points. By actively managing the wireless network, the WMS5316 Wireless Management System provides an enhanced wireless experience ...

The NETGEAR Pro Safe 16-AP Wireless Management System is an easy to use appliance to simplify the set up & management of wireless networks. Supporting up to 16 access points, the WMS5316 Wireless Management System provides a single location to configure & manage the entire wireless network. Designed for growing companies who don't want the complexity & cost of full wireless controllers, the WMS5316 Wireless Management System delivers centralized management, load balancing, RF management, & guest access via an intuitive interface. Priced far below a full wireless controller, the WMS5316 Wireless Management System provides significant time savings & simplifies the deployment & management of a wireless network. Mimicking the set up process of a single access point, the easy to use WMS5316 Wireless Management System enables even novice users to adopt a centralized management architecture for up to 16 access points. With automatic discovery of all supported access points in the network, the WMS5316 Wireless Management System speeds the configuration of a the wireless network. Automatic Radio Frequency (RF) management & channel selection takes care of optimizing the access points in the network for maximum connectivity, without intervention from the network administrator. A single entry of wireless parameters & security settings can then be pushed out to all of the access points, enabling a fully functional wireless network in minutes. The WMS5316 Wireless Management System monitors the wireless network to ensure optimal performance & respond to changes in the RF environment. It will automatically re-assign channels & adjust RF parameters for maximum connectivity. If enabled, load-balancing on Pro Safe Access Points can ensure that no single access point is overloaded continuously, by diverting clients to nearby access points. By actively managing the wireless network, the WMS5316 Wireless Management System provides an enhanced wireless experience ...

The NETGEAR Pro Safe 16-AP Wireless Management System is an easy to use appliance to simplify the set up & management of wireless networks. Supporting up to 16 access points, the WMS5316 Wireless Management System provides a single location to configure & manage the entire wireless network. Designed for growing companies who don't want the complexity & cost of full wireless controllers, the WMS5316 Wireless Management System delivers centralized management, load balancing, RF management, & guest access via an intuitive interface. Priced far below a full wireless controller, the WMS5316 Wireless Management System provides significant time savings & simplifies the deployment & management of a wireless network. Mimicking the set up process of a single access point, the easy to use WMS5316 Wireless Management System enables even novice users to adopt a centralized management architecture for up to 16 access points. With automatic discovery of all supported access points in the network, the WMS5316 Wireless Management System speeds the configuration of a the wireless network. Automatic Radio Frequency (RF) management & channel selection takes care of optimizing the access points in the network for maximum connectivity, without intervention from the network administrator. A single entry of wireless parameters & security settings can then be pushed out to all of the access points, enabling a fully functional wireless network in minutes. The WMS5316 Wireless Management System monitors the wireless network to ensure optimal performance & respond to changes in the RF environment. It will automatically re-assign channels & adjust RF parameters for maximum connectivity. If enabled, load-balancing on Pro Safe Access Points can ensure that no single access point is overloaded continuously, by diverting clients to nearby access points. By actively managing the wireless network, the WMS5316 Wireless Management System provides an enhanced wireless experience ...

NETGEARs popular FS100 series desktop switches, known for its reliability & performance, provide your LAN with high-speed, 10/100 Mbps auto-sensing connectivity for 16 users. Just plug in your Ethernet cables, connect a power cord, & youre ready to go-theres no software to configure. They negotiate to the fastest possible connection & with Auto Uplink technology, these switches automatically figure out if the link needs a straight through or cross-over connection, & makes the right choice. Existing 10BASE-T devices are easily integrated within higher bandwidth environments, with full wire speeds on all ports of either 10 Mbps or 100 Mbps. Engineered without the need for internal fans, they operate silently. & each of these very compact switches is housed in a sturdy metal case for years of dependable use. ...

NETGEARs JGS516 Gigabit Switch gives your office network a megaboost of speed & capacity that is within your budget. With up to 48 Gbps of bandwidth, this 16-port switch can blast 2000 Mbps per port while its affordable prices enable you to put it everywhere. Use it to take Gigabit Ethernet directly to the desktop! Standards-based for easy integration of 10, 100, & 1000 Mbps devices, this unmanaged, rack-mountable switch feature 10/100/1000 automatic speed on every port. Users can take advantage of its ability to deliver large amounts of multimedia, image, & video information in no time at all. Ideal for workgroups, labs, departments, or growing offices looking for outstanding performance at a low price. ...

** Take Gigabit to the Desktop** NETGEAR’s JGS500 Gigabit Switch Series gives your office network a megaboost of speed & capacity that is within your budget. With up to 48 Gbps of bandwidth, these 16- & 24-port switches can blast 2000 Mbps per port while their affordable prices enable you to put them everywhere. Use it to take Gigabit Ethernet directly to the desktop! Standards-based for easy integration of 10-, 100-, & 1000-Mbps devices, these unmanaged, rack-mountable switches feature 10/100/1000 automatic speed & full/half-duplex sensing plus Auto Uplink on every port. Users can take advantage of the their ability to deliver large amounts of multimedia, image, & video information in no time at all. Ideal for workgroups, labs, departments, or growing offices looking for oustanding performance at a low price. ** High Capacity** 1000-Mbps speeds & a switching capacity of up to 48 Gbps meet the performance needs for even the most bandwidth-hungry applications. The JGS500 series are perfect for graphics, multimedia, & other applications that have to move large files across the network quickly. ** Affordable** Aggressive prices enable your workgroup, department or small network to ramp up to Gigabit speeds, even all the way to the desktop. ** Flexible** Each port is equipped with automatic speed & duplex sensing, plus Auto Uplink to adjust for straight-through or crossover cables to make the right link. Standards-based design makes it easy to combine 10-, 100-, & 1000-Mbps devices on your network. ** Convenient** Easy to set up & easy to use, these unmanaged switches have per port LED’s for effortless network monitoring. They are compact enough for the desktop but come with a rack-mount kit. They are also compatible with PC, Macintosh, Linux, & Unix operating systems. ...

This 16-port switch is high on value & capability. With 16 10/100/1000 Mbps ports, its capable of powering 2000 Mbps of data ...

This 16-port switch is high on value & capability. With 16 10/100/1000 Mbps ports, it's capable of powering 2000 Mbps of data ...

These reliable & flexible cables offer ultra-low latency for Servers, Storage & Switches short 10 Gigabit uplinks, & come in 1m & 3m lengths. ...

The NETGEAR Pro Safe 20-AP Wireless Controller WC7520 offers a high-performance & fully-featured Wireless LAN architecture to meet the demands of medium-sized businesses, schools, & hospitals with up to 1, 500 users & more. Focusing on ease-of-use, the WC7520 Controller simplifies wireless deployments & network management with best-in-class wireless reliability, coverage, & performance. The scalable WC7520 Controller enables businesses to grow their wireless network as needed with a dramatic return on investment, with optional licenses that support their changing needs. Via licensing upgrades, the Pro Safe Wireless Controller scales up to 50 access points (AP) & can support IEEE 802.11n APs. For larger deployments, the WC7520 Controller is stackable up to three units, supporting up to 150 APs, including controller redundancy. Meeting the next generation needs of larger installations, the WC7520 Controller delivers central wireless management, integrated wireless mobility, robust top-end security & rich converged services such as L2/L3 fast roaming, guest access captive portal & Voice over Wi-Fi support. Built to last, the WC7520 Controller is backed by a Lifetime Warranty & delivers enterprise-class connectivity & secure wireless LAN functionality. Licenses SKUs are available, Please call & speak with your account manager.
- WC7510L-10000S (10-AP incremental license upgrade) Package Contents
- Wireless Controller (WC7520)
- Ethernet cable
- Power cord
- Installation guide
- Resource CD





...