Connect a VGA-equipped display through USB (Universal Serial Bus) 3.0, while keeping the USB (Universal Serial Bus) 3.0 port available. The USB32VGAEH USB (Universal Serial Bus) 3.0 to VGA Adapter turns a USB (Universal Serial Bus) 3.0 port into a VGA output port with 1920x 1200 (WUXGA) video support. The adapter features a built-in 1-Port USB (Universal Serial Bus) 3.0 hub, which offers a connection port in place of the USB (Universal Serial Bus) port used for connecting the VGA adapter
- an ideal workaround for Ultrabook or laptop users where only a limited number of USB (Universal Serial Bus) ports are available. Functioning as an external graphics card, this USB (Universal Serial Bus) to VGA adapter provides a convenient way to add multi-monitor capability to a USB (Universal Serial Bus) 3.0-enabled desktop or laptop computer (optimal performance from USB (Universal Serial Bus) 3.0, backward compatible with USB (Universal Serial Bus) 2.0). Leveraging the high-bandwidth (5 Gbps) Super Speed USB (Universal Serial Bus) 3.0 interface, the adapter delivers smooth, high-definition content to your VGA display / projector. The adapter can be used to mirror your primary desktop, showing the same image on each display, or to extend your desktop to double your workspace & increase your productivity.
...

Dock two 2.5" or 3.5" SATA III SSDs/HDDs over USB (Universal Serial Bus) 3.0 with UASP. The SDOCK2U33 Dual 2.5/3.5" SATA hard drive docking station lets you dock & swap drives from your desktop or laptop computer simultaneously, using a single USB (Universal Serial Bus) port. Enhanced with UASP (USB Attached SCSI Protocol), this hard drive docking station lets you get the most out of the fastest drive technologies such as SATA III (6 Gbps), solid state drives (SSD) & hybrid, drives with performance up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. The hard drive dock features independent power buttons for each individual drive, ensuring you can operate each hard drive separately. This gives you the freedom to hot-swap one drive while transferring data to another, saving you time. Extend the value of this hard drive docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in. IDE hard drive into a SATA hard drive dock. To ensure compatibility with your computer system, the SDOCK2U33 supports all of the leading operating systems, including: Microsoft Windows (8/7/ Vista/XP/ Server 2008/ Server 2003), Apple OSX (10.9/10.8/10.7/10.6), Linux, & Google Chrome OS. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing, UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP-enabled Star Tech.com Enclosure, & a SATA III solid state drive. ...

Dock two 2.5" or 3.5" SATA III SSDs/HDDs over USB (Universal Serial Bus) 3.0 with UASP. The SDOCK2U33 Dual 2.5/3.5" SATA hard drive docking station lets you dock & swap drives from your desktop or laptop computer simultaneously, using a single USB (Universal Serial Bus) port. Enhanced with UASP (USB Attached SCSI Protocol), this hard drive docking station lets you get the most out of the fastest drive technologies such as SATA III (6 Gbps), solid state drives (SSD) & hybrid, drives with performance up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. The hard drive dock features independent power buttons for each individual drive, ensuring you can operate each hard drive separately. This gives you the freedom to hot-swap one drive while transferring data to another, saving you time. Extend the value of this hard drive docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in. IDE hard drive into a SATA hard drive dock. To ensure compatibility with your computer system, the SDOCK2U33 supports all of the leading operating systems, including: Microsoft Windows (8/7/ Vista/XP/ Server 2008/ Server 2003), Apple OSX (10.9/10.8/10.7/10.6), Linux, & Google Chrome OS. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing, UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP-enabled Star Tech.com Enclosure, & a SATA III solid state drive. ...

Easily connect & swap hard drives & solid-state drives to & from your computer system, with the added benefit of a built-in cooling fan. This USB (Universal Serial Bus) 3.0 & e SATA docking station makes it easy for you to connect & swap your 2.5in or 3.5in SATAhard drives (HDD) & solid-state drives (SSD). The docking station also has a built-in fan that keeps your drives running at an optimal temperature for peak performance & longer drive lifespan. With support for either USB (Universal Serial Bus) 3.0 or e SATA host connections, this versatile drive dock gives you the freedom to connect to your computer through either port. Because USB (Universal Serial Bus) is available on virtually any computer, you can rest assured that this docking station will work with your desktop or laptop. Plus, the added benefit of e SATA ensures you can achieve SATA 6 Gpbs performance on computers with an available e SATA port. To ensure all your drives are supported, the docking station features a sleek slot-loading design that supports both 2.5in & 3.5in drives. The docking station has also been rigorously tested for support with large capacity drives (tested up to 6TB). For optimal performance, the docking station has a built-in 80mm fan that helps keep your drives running cooler. The fan offers variable speed control which enables you to make adjustments on the fly, in order to reduce power consumption & noise when your drives aren't being accessed. The HDD dock will also power down your SATA drives after a period of inactivity (USB mode only) or when the computer is turned off, to help reduce power consumption & noise when not being accessed. To save you time, this docking station is loaded with high-performance features on both interface connections. For the fastest possible performance, this dock supports full SATA III bandwidth of 6 Gbps when connected through e SATA, ensuring you can get the most out of your solid-state drives. With USB (Universal Serial Bus) 3.0 the dock ensures high-bandwidth transfer speeds up to 5 Gbps. The USB (Universal Serial Bus) host ...

Easily connect & swap hard drives & solid-state drives to & from your computer system, with the added benefit of a built-in cooling fan. This USB (Universal Serial Bus) 3.0 & e SATA docking station makes it easy for you to connect & swap your 2.5in or 3.5in SATAhard drives (HDD) & solid-state drives (SSD). The docking station also has a built-in fan that keeps your drives running at an optimal temperature for peak performance & longer drive lifespan. With support for either USB (Universal Serial Bus) 3.0 or e SATA host connections, this versatile drive dock gives you the freedom to connect to your computer through either port. Because USB (Universal Serial Bus) is available on virtually any computer, you can rest assured that this docking station will work with your desktop or laptop. Plus, the added benefit of e SATA ensures you can achieve SATA 6 Gpbs performance on computers with an available e SATA port. To ensure all your drives are supported, the docking station features a sleek slot-loading design that supports both 2.5in & 3.5in drives. The docking station has also been rigorously tested for support with large capacity drives (tested up to 6TB). For optimal performance, the docking station has a built-in 80mm fan that helps keep your drives running cooler. The fan offers variable speed control which enables you to make adjustments on the fly, in order to reduce power consumption & noise when your drives aren't being accessed. The HDD dock will also power down your SATA drives after a period of inactivity (USB mode only) or when the computer is turned off, to help reduce power consumption & noise when not being accessed. To save you time, this docking station is loaded with high-performance features on both interface connections. For the fastest possible performance, this dock supports full SATA III bandwidth of 6 Gbps when connected through e SATA, ensuring you can get the most out of your solid-state drives. With USB (Universal Serial Bus) 3.0 the dock ensures high-bandwidth transfer speeds up to 5 Gbps. The USB (Universal Serial Bus) host ...

Add four 3.5" SATA III hard drives to your computer externally through USB (Universal Serial Bus) 3.0 with UASP or e SATA. The S3540BU33E 4-Bay HDD enclosure lets you install four 3.5" SATA hard drives into an external enclosure, & connect to your computer through USB (Universal Serial Bus) 3.0 or e SATA. For fast performance & efficient data transfers, the enclosure supports SATA III transfer speeds
- up to 6 Gbps when connected through e SATA. The versatile enclosure can also be connected through USB (Universal Serial Bus) 3.0, with support for UASP, performing up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. To ensure compatibility with your computer system, the S3540BU33E supports all of the leading operating systems. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing, UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources.
...

Connect five hot-swappable 2.5/3.5" SATA III hard drives to your computer externally through USB (Universal Serial Bus) 3.0 with UASP or e SATA. The S355BU33ERM 5-bay Removable Hard Drive Enclosure lets you access five individual 2.5" or 3.5" hard drives simultaneously, through a single e SATA or USB (Universal Serial Bus) port connection to your laptop or desktop computer. For fast performance & efficient data transfers, you can connect the removable drive enclosure to your computer through either e SATA or USB (Universal Serial Bus) 3.0. The enclosure supports full SATA III data transfer rates up to 6 Gbps, when connected through e SATA. When connected through USB (Universal Serial Bus) 3.0, the enclosure supports transfer speeds up 5 Gbps plus support for UASP, which performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. With support for the fastest drive technologies available including SATA III (6 Gbps), hybrid drives & solid state drives (SSD), the enclosure helps you save time through optimized performance from your external storage. For optimal drive performance & longevity, the HDD/SSD enclosure features both a built-in fan as well as solid aluminum drive trays, which help cool your drives while ensuring maximum heat dissipation. To ensure compatibility with your computer system, the S355BU33ERM supports all of the leading operating systems, including: Microsoft Windows (8/7/ Vista/XP/ Server 2008/ Server 2003), Apple OSX (10.9/10.8/10.7/10.6), Linux, & Google Chrome OS. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing, UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP-enabled Star Tech.com Enclosure, & a SATA III solid state drive. ...

Connect five hot-swappable 2.5/3.5" SATA III hard drives to your computer externally through USB (Universal Serial Bus) 3.0 with UASP or e SATA. The S355BU33ERM 5-bay Removable Hard Drive Enclosure lets you access five individual 2.5" or 3.5" hard drives simultaneously, through a single e SATA or USB (Universal Serial Bus) port connection to your laptop or desktop computer. For fast performance & efficient data transfers, you can connect the removable drive enclosure to your computer through either e SATA or USB (Universal Serial Bus) 3.0. The enclosure supports full SATA III data transfer rates up to 6 Gbps, when connected through e SATA. When connected through USB (Universal Serial Bus) 3.0, the enclosure supports transfer speeds up 5 Gbps plus support for UASP, which performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. With support for the fastest drive technologies available including SATA III (6 Gbps), hybrid drives & solid state drives (SSD), the enclosure helps you save time through optimized performance from your external storage. For optimal drive performance & longevity, the HDD/SSD enclosure features both a built-in fan as well as solid aluminum drive trays, which help cool your drives while ensuring maximum heat dissipation. To ensure compatibility with your computer system, the S355BU33ERM supports all of the leading operating systems, including: Microsoft Windows (8/7/ Vista/XP/ Server 2008/ Server 2003), Apple OSX (10.9/10.8/10.7/10.6), Linux, & Google Chrome OS. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing, UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP-enabled Star Tech.com Enclosure, & a SATA III solid state drive. ...

Exactly duplicate a 2.5in or 3.5in SATA hard drive to 5 hard drives simultaneously, or dock any of the 6 connected hard drives to your computer through USB (Universal Serial Bus) 3.0 or e SATA. The SATDOCK5U3ER Hard Drive Duplicator & Docking Station lets you clone a 2.5in or 3.5in SATA hard drive (HDD) or solid-state drive (SSD) to five other SATA drives simultaneously, as a standalone device. The duplicator also lets you erase up to 5 drives, without a host connection. You can also use the duplicator as a 5-bay HDD / SSD docking station, by connecting it to a host computer system through either USB (Universal Serial Bus) 3.0 or e SATA. With support for high-capacity drives (tested with up to 6TB), this is a simple & cost-effective way to boost your data storage/backup capabilities. By copying data from one drive to five drives simultaneously, the hard drive cloner helps boost your productivity by avoiding the hassle of repeatedly swapping drives in & out during high volume duplication projects. Plus, the dock supports erasing up to five drives simultaneously with multiple operating modes, including Quick Erase as well as Multipass Overwriting (Do D)
- the ideal solution for permanently erasing confidential information & helping to protect your business & your clients from identity theft. With a built-in LCD display, the SATDOCK5U3ER makes it easy to monitor duplication progress & review copy/erase results & drive diagnostics during standalone operation. The housing has also been specifically designed with ease-of-use in mind. The drive slots feature a dual-profile design to support hassle-free swapping between 2.5in & 3.5in hard drives & solid-state drives without having to use additional brackets or adapters. With the option to connect the docking station through either e SATA or USB (Universal Serial Bus) 3.0, the SATDOCK5U3ER provides a versatile solution for expanding the storage capability of almost any laptop or desktop computer. For fast performance, you can connect the docking station to your c
...

Exactly duplicate a 2.5in or 3.5in SATA hard drive to 5 hard drives simultaneously, or dock any of the 6 connected hard drives to your computer through USB (Universal Serial Bus) 3.0 or e SATA. The SATDOCK5U3ER Hard Drive Duplicator & Docking Station lets you clone a 2.5in or 3.5in SATA hard drive (HDD) or solid-state drive (SSD) to five other SATA drives simultaneously, as a standalone device. The duplicator also lets you erase up to 5 drives, without a host connection. You can also use the duplicator as a 5-bay HDD / SSD docking station, by connecting it to a host computer system through either USB (Universal Serial Bus) 3.0 or e SATA. With support for high-capacity drives (tested with up to 6TB), this is a simple & cost-effective way to boost your data storage/backup capabilities. By copying data from one drive to five drives simultaneously, the hard drive cloner helps boost your productivity by avoiding the hassle of repeatedly swapping drives in & out during high volume duplication projects. Plus, the dock supports erasing up to five drives simultaneously with multiple operating modes, including Quick Erase as well as Multipass Overwriting (Do D)
- the ideal solution for permanently erasing confidential information & helping to protect your business & your clients from identity theft. With a built-in LCD display, the SATDOCK5U3ER makes it easy to monitor duplication progress & review copy/erase results & drive diagnostics during standalone operation. The housing has also been specifically designed with ease-of-use in mind. The drive slots feature a dual-profile design to support hassle-free swapping between 2.5in & 3.5in hard drives & solid-state drives without having to use additional brackets or adapters. With the option to connect the docking station through either e SATA or USB (Universal Serial Bus) 3.0, the SATDOCK5U3ER provides a versatile solution for expanding the storage capability of almost any laptop or desktop computer. For fast performance, you can connect the docking station to your c
...