Turn a 2.5in SATA HDD/SSD into an external USB (Universal Serial Bus) 3.0 drive while also an additional or replacement removable enclosure for the SAT2510U3REM. The SAT2510U3S 2.5in Hard Disk Drive Enclosure for SAT2510U3REM is a spare SATA drive enclosure for use with the SAT2510U3REM Removable Hard Drive Backup System/ Mobile Rack, which simplifies removing/rotating drives, & is also backward compatible with the USB (Universal Serial Bus) 2.0 model, SAT2510U2REM. This 2.5" SATA enclosure allows for native SATA connectivity (SATA 6 Gbps compliant) while mounted inside the SAT2510U3REM backup system, but also provides Super Speed USB (Universal Serial Bus) 3.0 connectivity (with up to 5 Gbps of data bandwidth) when used externally. ...

Turn a 2.5in SATA Hard Drive (9.5mm or 12.5mm) into a Portable USB (Universal Serial Bus) 3.0 External Hard Drive. The SAT2510B12U3 USB (Universal Serial Bus) 3.0 External SATA Hard Drive Enclosure lets you connect a 2.5in (SATA, SATA II, SATA III) hard drive or solid state drive (SSD) through USB (Universal Serial Bus) 3.0. Uniquely designed to be able to fit both 9.5mm & high capacity 12.5mm height hard drives for compatibility with virtually any available SATA hard drive. Large capacity drives (tested with up to 1TB) can be used to greatly enhance your computer's storage/backup capabilities. Supporting data transfer rates of up to 5 Gbps, this external HDD enclosure delivers access to files at lightning fast speeds
- 10x that of USB (Universal Serial Bus) 2.0, & 60% faster than SATA II e SATA. Plus, the USB (Universal Serial Bus) 3.0 interface is backward compatible with USB (Universal Serial Bus) revisions 2.0 & 1.1, so the enclosure can be used with older systems that don't support the newest USB (Universal Serial Bus) standard (at speeds of 480 Mbps & 12 Mbps, respectively).
...

Turn a 2.5in SATA Hard Drive (9.5mm or 12.5mm) into a Portable USB (Universal Serial Bus) 3.0 External Hard Drive. The SAT2510B12U3 USB (Universal Serial Bus) 3.0 External SATA Hard Drive Enclosure lets you connect a 2.5in (SATA, SATA II, SATA III) hard drive or solid state drive (SSD) through USB (Universal Serial Bus) 3.0. Uniquely designed to be able to fit both 9.5mm & high capacity 12.5mm height hard drives for compatibility with virtually any available SATA hard drive. Large capacity drives (tested with up to 1TB) can be used to greatly enhance your computer's storage/backup capabilities. Supporting data transfer rates of up to 5 Gbps, this external HDD enclosure delivers access to files at lightning fast speeds
- 10x that of USB (Universal Serial Bus) 2.0, & 60% faster than SATA II e SATA. Plus, the USB (Universal Serial Bus) 3.0 interface is backward compatible with USB (Universal Serial Bus) revisions 2.0 & 1.1, so the enclosure can be used with older systems that don't support the newest USB (Universal Serial Bus) standard (at speeds of 480 Mbps & 12 Mbps, respectively).
...

Turn a 7mm high 2.5in SATA III SSD/HDD into a UASP-supported USB (Universal Serial Bus) 3.0 External Drive. This slim, pocket-sized drive enclosure is specifically engineered for 7mm drives, giving you the option to turn your thin hard drive or solid state drive into an external storage solution connected through UASP-enabled USB (Universal Serial Bus) 3.0. With a thin yet durable design, the enclosure fits your 7mm drives perfectly to eliminate any drive movement inside the enclosure, which could be a problem with a looser-fitting enclosure. To help save you time transferring data to & from your 7mm SSD or HDD, this UASP-enabled enclosure supports transfer speeds up to 70% faster than traditional USB (Universal Serial Bus) 3.0, when used with a UASP-enabled host computer. Plus, the enclosure is USB (Universal Serial Bus)-powered, so you don't have to carry a power adapter with you, giving you one less thing to pack when you're traveling. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP enabled Star Tech.com Enclosure, & a SATA III solid state drive. ...

Turn a 7mm high 2.5in SATA III SSD/HDD into a UASP-supported USB (Universal Serial Bus) 3.0 External Drive. This slim, pocket-sized drive enclosure is specifically engineered for 7mm drives, giving you the option to turn your thin hard drive or solid state drive into an external storage solution connected through UASP-enabled USB (Universal Serial Bus) 3.0. With a thin yet durable design, the enclosure fits your 7mm drives perfectly to eliminate any drive movement inside the enclosure, which could be a problem with a looser-fitting enclosure. To help save you time transferring data to & from your 7mm SSD or HDD, this UASP-enabled enclosure supports transfer speeds up to 70% faster than traditional USB (Universal Serial Bus) 3.0, when used with a UASP-enabled host computer. Plus, the enclosure is USB (Universal Serial Bus)-powered, so you don't have to carry a power adapter with you, giving you one less thing to pack when you're traveling. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP enabled Star Tech.com Enclosure, & a SATA III solid state drive. ...

Turn a 2.5" SATA HDD/SSD into an external Super Speed USB (Universal Serial Bus) 3.0 Hard Drive/ Solid State Drive. The SAT2510BU32 2.5-inch Super Speed USB (Universal Serial Bus) 3.0 SATA Hard Drive Enclosure turns a normal 2.5-inch SATA hard drive (HDD) or solid state drive (SSD) into a portable, external hard drive. Connecting to a host computer through USB (Universal Serial Bus) 3.0 with no external power required, this enclosure supports full Super Speed USB (Universal Serial Bus) data transfer speeds up to 5 Gbps
- 10x faster than the USB (Universal Serial Bus) 2.0 standard, & is backward compatible with older USB (Universal Serial Bus) connections (USB 2.0). Large capacity drives (tested with up to 1TB) can be used to greatly enhance your computer's storage/backup capabilities. Featuring a lightweight, portable design this USB (Universal Serial Bus) 3.0 SATA HDD enclosure is constructed of aluminum, which offers maximum durability & operating heat dissipation.
...

Turn a 2.5in SATA hard drive into a USB2.0 or Fire Wire external hard drive for PC or Mac. The SAT2510U2F External Hard Drive Enclosure supports both USB (Universal Serial Bus) 2.0 & Fire Wire 400 (IEEE1394a) host connections, providing the compatibility needed to create a convenient & versatile external SATA storage solution for desktop computers as well as Mac Books & Windows based laptops. Large capacity drives (tested with up to 1TB) can be used to greatly enhance your computers storage/backup capabilities. The USB/ Fire Wire enclosure features a slim, lightweight aluminum design &

Includes:: a 6-pin Fire Wire cable simplifying the option to connect through IEEE 1394a, as well as a USB (Universal Serial Bus) to Power adapter & USB (Universal Serial Bus) 2.0 Y-cable which can be used to ensure sufficient power delivery for higher capacity/higher power consumption hard drives (HDD) or solid state drives (SSD).

...

Turn a 2.5in SATA hard drive into a complete external storage solution over USB (Universal Serial Bus) 2.0. The SAT2510SCB External Hard Drive Enclosure transforms any 2.5" SATA (SATA, SATA II, SATA III) hard drive or solid state drive (SSD) into a portable USB (Universal Serial Bus) external hard drive. Large capacity drives (tested with up to 1TB) can be used to greatly enhance your computer's storage/backup capabilities. Designed to provide convenience & portability, the hard drive enclosure features a built-on USB (Universal Serial Bus) 2.0 cable & a durable yet lightweight aluminum construction that fits perfectly in your pocket or laptop bag when not in use. To simplify connection to the host desktop or laptop computer, the enclosure can be powered through its built-on USB (Universal Serial Bus) connection, eliminating the need for an external power supply & having to find a suitable power outlet while making it easier to backup data or load stored files. ...

Connect your Cisco 10 Gb E SFP+ network devices with this cost-effective, passive Twinax copper cable. This 10G SFP+ cable delivers what you need most in your network connections: reliable performance. It's built to MSA specifications & fully tested to ensure seamless compatibility. This passive twinaxial cable is a fully hot-pluggable, direct-attach cable, supporting 10 Gigabit Ethernet applications connected through SFP+ (Small Form-Factor Pluggable) ports. Designed for short-length, high-speed interconnects, this low-power, low-latency Twinax cable is a cost-effective alternative to fiber-optic cable assemblies, supporting short-distance applications such as point-to-point in-rack network switch or server connections. ...

This slim CAT6 cable meets all Category 6 patch cable specifications to deliver a reliable Gigabit network connection in high-density data center applications. The design of this slim CAT6 patch cord is 36% thinner than standard networking cables, which allows better airflow & heat dissipation in tight spaces. The cable is also more flexible than standard Ethernet cables, so cable runs are easier in crowded network racks. This cable features snagless connectors that protect the RJ45 clips during installation, making them less likely to snag or break as you pull them through narrow spaces. This CAT6 patch cable is tested to comply with ANSI/TIA 568 C.2 Category 6 requirements ensuring a reliable connection to your networking equipment. Certified with Low Smoke Zero Halogen (LSZH) fire rating, this patch cord ensures a safe connection. The 50-micron gold connectors on the patch cable deliver optimum conductivity & eliminate signal loss due to oxidation or corrosion. Each CAT6 cable is manufactured using high-quality copper conductors & is carefully constructed & tested to keep Near-End Crosstalk (NEXT) well within acceptable limits. Plus, each cable is built with 28 AWG copper wire, to ensure peak performance for your demanding Ethernet applications. ...