Turn a 2.5in IDE drive into an external storage device with USB (Universal Serial Bus) 2.0 connectivity. This USB (Universal Serial Bus) 2.0 to IDE 2.5 in. External Hard Drive Enclosure lets you transform virtually any 2.5in IDE notebook hard drive into the perfect portable storage solution. Ideal for storing digital multimedia & other demanding applications, the IDE hard drive enclosure means that you can get the most out of your hard drive, connecting to a host computer using USB (Universal Serial Bus) 2.0 (also backward compatible with USB (Universal Serial Bus) 1.1), for maximum data transfer rates of up to 480 Mbps. A truly portable solution, the enclosure features lightweight yet durable aluminum construction, as well as a small form factor design that fits perfectly into your pocket or notebook bag when not in use. To eliminate the hassle of having to find a power outlet when you're ready to back up your data or load your stored files, the enclosure requires no external power supply, as it's powered through USB (Universal Serial Bus) connection to the host computer. ...

Turn a 2.5in SATA Hard Drive (9.5mm or 12.5mm) into a Portable USB (Universal Serial Bus) 3.0 External Hard Drive. The SAT2510B12U3 USB (Universal Serial Bus) 3.0 External SATA Hard Drive Enclosure lets you connect a 2.5in (SATA, SATA II, SATA III) hard drive or solid state drive (SSD) through USB (Universal Serial Bus) 3.0. Uniquely designed to be able to fit both 9.5mm & high capacity 12.5mm height hard drives for compatibility with virtually any available SATA hard drive. Large capacity drives (tested with up to 1TB) can be used to greatly enhance your computers storage/backup capabilities. Supporting data transfer rates of up to 5 Gbps, this external HDD enclosure delivers access to files at lightning fast speeds
- 10x that of USB (Universal Serial Bus) 2.0, & 60% faster than SATA II e SATA. Plus, the USB (Universal Serial Bus) 3.0 interface is backward compatible with USB (Universal Serial Bus) revisions 2.0 & 1.1, so the enclosure can be used with older systems that dont support the newest USB (Universal Serial Bus) standard (at speeds of 480 Mbps & 12 Mbps, respectively).
...

Turn a 3.5" IDE or SATA Hard Drive into a USB (Universal Serial Bus) 3.0 External Hard Drive. The UNI3510BMU32 USB (Universal Serial Bus) 3.0 IDE/SATA Hard Drive Enclosure lets you connect almost any 3.5in hard drive (HDD) through an available USB (Universal Serial Bus) port. The enclosure delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections as well. This Hybrid 3.5" enclosure works with IDE 66/100/133 & SATA I/II/III hard drives ensuring compatible with virtually any 3.5in hard drive. Large capacity drives (tested with up to 4TB) can be used to greatly enhance your computer's storage/backup capabilities. The HDD enclosure supports full Super Speed USB (Universal Serial Bus) 3.0 data transfer speeds up to 5 Gbps
- 10x faster than the USB (Universal Serial Bus) 2.0 standard, & is backward compatible with older USB (Universal Serial Bus) connections. The UNI3510BMU32 features high quality aluminum construction.
...

Turn a 2.5in SATA hard drive into an external backup storage solution over USB (Universal Serial Bus) 2.0. This 2.5in External SATA Hard Drive Enclosure connects to a host computer through USB (Universal Serial Bus) 2.0, allowing you to turn any standard 2.5in Serial ATA hard drive (SATA, SATA II, SATA III) into a highly portable storage solution. Large capacity drives (tested with up to 1TB) can be used to greatly enhance your computers storage/backup capabilities. The SATA hard drive enclosure offers One Button Backup, allowing you to automate backups of data from the host computer to the external hard drive at the touch of a button. The external hard drive enclosure features a slim, lightweight design as well as an attractive black metal casing. The USB/SATA enclosure also

Includes:: a USB (Universal Serial Bus) Y-cable that can be used to ensure sufficient power for higher capacity/higher power consumption drives.

...

The S2510BU3PWPS USB (Universal Serial Bus) 3.0 HDD Enclosure features keypad Encryption, enabling you to turn almost any 2.5-inch SATA hard drive (HDD) or solid state drive (SSD) into an AES-encrypted external hard drive. The enclosure supports large capacity hard drives (tested with up to 1TB), maximizing system storage expansion & backup capabilities. Using an Advanced Encryption Standard algorithm (256-bit AES), all of the data on hard drives installed within the enclosure is securely protected from unauthorized users. Encryption is performed completely in-hardware & real-time, ensuring maximum performance while eliminating the need for complicated software installation. Access to the encrypted content is allowed through the built-in keypad, so any system that supports a USB (Universal Serial Bus) storage device can be used to access the data. The S2510BU3PWPS encrypted HDD enclosure is backed by a Star Tech.com 2-year warranty & free lifetime technical support. *** The Star Tech.com Advantage*** -Real-time 256-bit AES encryption ensures data stored on your external drive is secure -Platform independent hardware encryption saves the hassle of installing software or drivers -Super Speed USB (Universal Serial Bus) 3.0 allows for up to 5 Gbps of data bandwidth for faster data transfers, while remaining backward compatible with USB (Universal Serial Bus) 2.0 systems ...

Turn a 2.5" SATA Hard Drive or Solid State Drive into a UASP supported USB (Universal Serial Bus) 3.0 External Hard Drive. The S2510BPU33 USB (Universal Serial Bus) 3.0 Hard Drive Enclosure with UASP lets you connect a 2.5in SATA III hard drive (HDD) or solid state drive (SSD) through an available USB (Universal Serial Bus) port. The enclosure delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections as well. Enhanced with UASP (USB Attached SCSI Protocol), this 2.5" SATA III enclosure performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. Using a more efficient protocol than the traditional USB (Universal Serial Bus) BOT (Bulk-Only Transport), UASP reduces latency, significantly increasing transfer speeds & reducing processor usage to utilize the full potential of your SATA III hard drives. With support for SATA I/II/III, & large capacity drives (tested up to 1TB) this HDD enclosure is compatible with virtually any 2.5in SATA hard drive, & greatly increases the storage/backup capabilities of your computer. For added portability the USB (Universal Serial Bus) 3.0/SATA III enclosure features tool-less HDD installation, & requires no external power adapter. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP enabled Star Tech.com Enclosure, & a SATA III solid state drive. ...

Turn a 2.5" SATA Hard Drive or Solid State Drive into a UASP supported USB (Universal Serial Bus) 3.0 External Hard Drive. The S2510BPU33 USB (Universal Serial Bus) 3.0 Hard Drive Enclosure with UASP lets you connect a 2.5in SATA III hard drive (HDD) or solid state drive (SSD) through an available USB (Universal Serial Bus) port. The enclosure delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections as well. Enhanced with UASP (USB Attached SCSI Protocol), this 2.5" SATA III enclosure performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. Using a more efficient protocol than the traditional USB (Universal Serial Bus) BOT (Bulk-Only Transport), UASP reduces latency, significantly increasing transfer speeds & reducing processor usage to utilize the full potential of your SATA III hard drives. With support for SATA I/II/III, & large capacity drives (tested up to 1TB) this HDD enclosure is compatible with virtually any 2.5in SATA hard drive, & greatly increases the storage/backup capabilities of your computer. For added portability the USB (Universal Serial Bus) 3.0/SATA III enclosure features tool-less HDD installation, & requires no external power adapter. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP enabled Star Tech.com Enclosure, & a SATA III solid state drive. ...

Turn a 2.5in SATA HDD/SSD into an external USB (Universal Serial Bus) 3.0 drive while also an additional or replacement removable enclosure for the SAT2510U3REM. The SAT2510U3S 2.5in Hard Disk Drive Enclosure for SAT2510U3REM is a spare SATA drive enclosure for use with the SAT2510U3REM Removable Hard Drive Backup System/ Mobile Rack, which simplifies removing/rotating drives, & is also backward compatible with the USB (Universal Serial Bus) 2.0 model, SAT2510U2REM. This 2.5" SATA enclosure allows for native SATA connectivity (SATA 6 Gbps compliant) while mounted inside the SAT2510U3REM backup system, but also provides Super Speed USB (Universal Serial Bus) 3.0 connectivity (with up to 5 Gbps of data bandwidth) when used externally. ...

Turn a 2.5in SATA HDD/SSD into an external USB (Universal Serial Bus) 3.0 drive while also an additional or replacement removable enclosure for the SAT2510U3REM. The SAT2510U3S 2.5in Hard Disk Drive Enclosure for SAT2510U3REM is a spare SATA drive enclosure for use with the SAT2510U3REM Removable Hard Drive Backup System/ Mobile Rack, which simplifies removing/rotating drives, & is also backward compatible with the USB (Universal Serial Bus) 2.0 model, SAT2510U2REM. This 2.5" SATA enclosure allows for native SATA connectivity (SATA 6 Gbps compliant) while mounted inside the SAT2510U3REM backup system, but also provides Super Speed USB (Universal Serial Bus) 3.0 connectivity (with up to 5 Gbps of data bandwidth) when used externally. ...

Turn a 2.5in SATA Hard Drive (9.5mm or 12.5mm) into a Portable USB (Universal Serial Bus) 3.0 External Hard Drive. The SAT2510B12U3 USB (Universal Serial Bus) 3.0 External SATA Hard Drive Enclosure lets you connect a 2.5in (SATA, SATA II, SATA III) hard drive or solid state drive (SSD) through USB (Universal Serial Bus) 3.0. Uniquely designed to be able to fit both 9.5mm & high capacity 12.5mm height hard drives for compatibility with virtually any available SATA hard drive. Large capacity drives (tested with up to 1TB) can be used to greatly enhance your computer's storage/backup capabilities. Supporting data transfer rates of up to 5 Gbps, this external HDD enclosure delivers access to files at lightning fast speeds
- 10x that of USB (Universal Serial Bus) 2.0, & 60% faster than SATA II e SATA. Plus, the USB (Universal Serial Bus) 3.0 interface is backward compatible with USB (Universal Serial Bus) revisions 2.0 & 1.1, so the enclosure can be used with older systems that don't support the newest USB (Universal Serial Bus) standard (at speeds of 480 Mbps & 12 Mbps, respectively).
...