Keeping the same 450 W cooling capacity using only 2 slots, the WINDFORCE 3x 450 W cooling system is equipped with two 8 mm & four 6 mm cooper heat-pipes, inclined fans, & GIGABYTE " Triangle Cool" technology. This not only provides an effective heat dissipation capacity but GPU Boost 2.0 technology also enables higher performance due to a lower temperature. Br&-new instinctive user interface, easier to monitoring & adjusting all important settings. Users can set up MONITORING, GPU CLOCK, MEMORY CLOCK, FAN, OSD, ONLINE SUPPORT & update driver, BIOS directly. On board 4GB of GDDR5 memory, satisfying your multi-screen setup, high definition & extreme gaming experience.
- WINDFORCE 3X 450W Cooling system
- Powered by NVIDIA Ge Force GTX 770 GPU
- Integrated with 4GB GDDR5 memory, 256-bit memory interface
- Features Dual-link DVI-I/ DVI-D / HDMI / Display Port
- BASE:1046 M Hz / BOOST:1085 MHz
- System power supply requirement: 600W ** Specifications**
- Chipset Ge Force GTX 770
- Memory Clock 7010 MHz
- Process Technology 28 nm
- Memory Size 4096 MB
- Memory Bus 256 bit
- Core Clock Base / Boost clock:1046 / 1085 MHz
- Card Bus PCI-E 3.0
- Memory Type GDDR5
- Direct X 11.1
- Open GL 4.3
- PCB Form ATX
- Digital max resolution 4096 X 2160 (via a single HDMI connector & not supported with two DVI connectors)
- Analog max resolution 2048 x 1536
- Multi-view 4
- I/O Dual-link DVI-I*1
- DVI-D*1
- Display Port*1
- HDMI*1
- Card size L=292mm W=129mm H=43mm
- Power requirement 600W (with one 6-pin & one 8-pin external power connectors)

























...

** Features**
- NEW WINDFORCE 3X 2 Slot 450W fan sink with " Triangle Cool"
- Core/ Mem clock: 1137 MHz (std 1046

...

** Features**
- NEW WINDFORCE 3X 2 Slot 450W fan sink with " Triangle Cool"
- Core/ Mem clock: 1137 MHz (std 1046 M Hz)
-


...

** New WINDFORCE 3X 450W Gaming Graphics Card**
- WINDFORCE 3X 450W Cooling systen
- Powered by NVIDIA Ge Force GTX 770 GPU

...

Compare to reference 6-phase power design, GV-N770OC-4GD V2.0 makes the MOSFET working at a lower temperature & provides more stable voltage output. Besides, over temperature protection & load balance to each MOSFET can effectively extend the card life. ...

Keeping the same 450W Cooling capacity using only 2 slots, the New WINDFORCE 3X 450W cooling system is equipped with two 8mm & four 6mm cooper heat-pipes, inclined fans, & GIGABYTE " Triangle Cool" technology. This not only provides an effective heat dissipation capacity but GPU Boost 2.0 technology also enables higher performance due to a lower temperature. Br&-new instinctive user interface, easier to monitoring & adjusting all important settings. Users can set up MONITORING, GPU CLOCK, MEMORY CLOCK, FAN, OSD, ONLINE SUPPORT & update driver, BIOS directly. In the Kepler architecture, support up to four displays on a single card. Satisfy your multi-screen setup, high definition & extreme gaming experience. Compared to the 6-phase reference design, the GV-N780OC-3GD provides a more stable voltage output while having the MOSFET working at lower temperatures. Moreover, temperature protection & load balance to each MOSFET can effectively extends the graphics card life.
- WINDFORCE 3X 450W Cooling system
- Powered by NVIDIA Ge Force GTX 780 GPU
- Integrated with industrys best 3GB GDDR5 memory 384-bit memory interface
- Features Dual-link DVI-I/ DVI-D / HDMI / Display Port
- BASE:1019 M Hz / BOOST:1071 MHz
- Reinforced backplate with side panel
- System power supply requirement: 600W ** Specifications**
- Chipset Ge Force GTX 780
- Memory Clock 6008 MHz
- Core Clock Base / Boost clock:1019 / 1071 MHz
- Process Technology 28 nm
- Memory Size 3072 MB
- Memory Bus 384 bit
- Card Bus PCI-E 3.0
- Memory Type GDDR5
- Direct X 11.2
- Open GL 4.3
- PCB Form ATX
- Digital max resolution 4096 X 2160 (via a single HDMI connector & not supported with two DVI connectors)
- Analog max resolution 2048 x 1536
- Multi-view 4
- I/O Dual-link DVI-I*1 / DVI-D*1 / Display Port*1 / HDMI*1
- Card size L=292mm, W=129mm, H=43mm
- Power requirement 600W (with two 8-pin external power connectors)























...

Keeping the same 450W Cooling capacity using only 2 slots, the New WINDFORCE 3X 450W cooling system is equipped with two 8mm & four 6mm cooper heat-pipes, inclined fans, & GIGABYTE " Triangle Cool" technology. This not only provides an effective heat dissipation capacity but GPU Boost 2.0 technology also enables higher performance due to a lower temperature. Br&-new instinctive user interface, easier to monitoring & adjusting all important settings. Users can set up MONITORING, GPU CLOCK, MEMORY CLOCK, FAN, OSD, ONLINE SUPPORT & update driver, BIOS directly. In the Kepler architecture, support up to four displays on a single card. Satisfy your multi-screen setup, high definition & extreme gaming experience. Compared to the 6-phase reference design, the GV-N780OC-3GD provides a more stable voltage output while having the MOSFET working at lower temperatures. Moreover, temperature protection & load balance to each MOSFET can effectively extends the graphics card life.
- WINDFORCE 3X 450W Cooling system
- Powered by NVIDIA Ge Force GTX 780 GPU
- Integrated with industry's best 3GB GDDR5 memory 384-bit memory interface
- Features Dual-link DVI-I/ DVI-D / HDMI / Display Port
- BASE:1019 M Hz / BOOST:1071 MHz
- Reinforced backplate with side panel
- System power supply requirement: 600W ** Specifications**
- Chipset Ge Force GTX 780
- Memory Clock 6008 MHz
- Core Clock Base / Boost clock:1019 / 1071 MHz
- Process Technology 28 nm
- Memory Size 3072 MB
- Memory Bus 384 bit
- Card Bus PCI-E 3.0
- Memory Type GDDR5
- Direct X 11.2
- Open GL 4.3
- PCB Form ATX
- Digital max resolution 4096 X 2160 (via a single HDMI connector & not supported with two DVI connectors)
- Analog max resolution 2048 x 1536
- Multi-view 4
- I/O Dual-link DVI-I*1 / DVI-D*1 / Display Port*1 / HDMI*1
- Card size L=292mm, W=129mm, H=43mm
- Power requirement 600W (with two 8-pin external power connectors)























...

The new Ge Force GTX 780 marks an evolution in gaming performance -- an insanely fast, smooth, & whisper-quiet experience, every time. Get the best gaming, with NVIDIA Ge Force Experience™ one-click drivers & settings.
- Model name GV-N780D5-3GD-B
- GPU GTX 780
- Core Clock (MHz) Base: 863 M Hz Boost: 900 M Hz
- Stream Processor 2304
- Mem Clock (MHz) 6008 M Hz
- Mem Size 3072MB
- Mem Bus (bit) 384 bit
- Mem Type 64 Mx 32 GDDR5
- Memory (pcs) 12
- I/O Dual link DVI-I / DV-D HDMI x 1 Displayport
- Direct X Open GL Direct X 11.1 Open GL 4.3
- Card Interface PCI Express 3.0
- Board Form ATX 2 slot
- Fan/ Heat Sink NVIDIA Fan
- Card Size H=38 mm, L=281 mm, W=111 mm














...

Keeping the same 450W cooling capacity using only 2 slots, the WINDFORCE 3X 450W cooling system is equipped with two 8mm & four 6mm cooper heat-pipes, inclined fans, & GIGABYTE " Triangle Cool" technology. This not only provides an effective heat dissipation capacity but GPU Boost 2.0 technology also enables higher performance due to a lower temperature. In the Kepler architecture, support up to four displays on a single card. Satisfy your multi-screen setup, high definition & extreme gaming experience.
- WINDFORCE 3X 450W Cooling system
- 8+2 phase VRM power design
- Powered by NVIDIA Ge Force GTX 780 GPU
- Integrated with industrys best 3GB GDDR5 memory 384-bit memory interface
- Features Dual-link DVI-I/ DVI-D / HDMI / Display Port
- BASE:863 M Hz / BOOST:900 MHz
- System power supply requirement: 600W Br&-new instinctive user interface, easier to monitoring & adjusting all important settings. Users can set up MONITORING, GPU CLOCK, MEMORY CLOCK, FAN, OSD, ONLINE SUPPORT & update driver, BIOS directly. Compared to the 6-phase reference design, the GV-N780WF3-3GD V2.0 provides a more stable voltage output while having the MOSFET working at lower temperatures. Moreover, temperature protection & load balance to each MOSFET can effectively extends the graphics card life. ** Specification**
- Chipset Ge Force GTX 780
- Memory Clock 6008 MHz
- Process Technology 28 nm
- Memory Size 3072 MB
- Memory Bus 384 bit
- Core Clock Base / Boost clock:863 / 900 MHz
- Card Bus PCI-E 3.0
- Memory Type GDDR5
- Direct X 11.1
- Open GL 4.3
- PCB Form ATX
- Digital max resolution 4096 X 2160 (via a single HDMI connector & not supported with two DVI connectors)
- Analog max resolution 2048 x 1536
- Multi-view 4
- I/O DVI-I*1
- DVI-D*1
- Display Port*1
- HDMI*1
- Card size L=292mm, W=129mm, H=43mm
- Power requirement 600W (with two 8-pin external power connectors)


























...

Keeping the same 450W cooling capacity using only 2 slots, the WINDFORCE 3X 450W cooling system is equipped with two 8mm & four 6mm cooper heat-pipes, inclined fans, & GIGABYTE " Triangle Cool" technology. This not only provides an effective heat dissipation capacity but GPU Boost 2.0 technology also enables higher performance due to a lower temperature. In the Kepler architecture, support up to four displays on a single card. Satisfy your multi-screen setup, high definition & extreme gaming experience.
- WINDFORCE 3X 450W Cooling system
- 8+2 phase VRM power design
- Powered by NVIDIA Ge Force GTX 780 GPU
- Integrated with industry's best 3GB GDDR5 memory 384-bit memory interface
- Features Dual-link DVI-I/ DVI-D / HDMI / Display Port
- BASE:863 M Hz / BOOST:900 MHz
- System power supply requirement: 600W Br&-new instinctive user interface, easier to monitoring & adjusting all important settings. Users can set up MONITORING, GPU CLOCK, MEMORY CLOCK, FAN, OSD, ONLINE SUPPORT & update driver, BIOS directly. Compared to the 6-phase reference design, the GV-N780WF3-3GD V2.0 provides a more stable voltage output while having the MOSFET working at lower temperatures. Moreover, temperature protection & load balance to each MOSFET can effectively extends the graphics card life. ** Specification**
- Chipset Ge Force GTX 780
- Memory Clock 6008 MHz
- Process Technology 28 nm
- Memory Size 3072 MB
- Memory Bus 384 bit
- Core Clock Base / Boost clock:863 / 900 MHz
- Card Bus PCI-E 3.0
- Memory Type GDDR5
- Direct X 11.1
- Open GL 4.3
- PCB Form ATX
- Digital max resolution 4096 X 2160 (via a single HDMI connector & not supported with two DVI connectors)
- Analog max resolution 2048 x 1536
- Multi-view 4
- I/O DVI-I*1
- DVI-D*1
- Display Port*1
- HDMI*1
- Card size L=292mm, W=129mm, H=43mm
- Power requirement 600W (with two 8-pin external power connectors)


























...