The GS-1008P is an 8-port 10/100/1000BASE switch with 8 Po E ports, designed for use in small or medium sized network environments. This product is compact in size, making it ideal for users with limited space. It also gives users the option of installing it in a 19" cabinet with rack-mount kits or underneath a desk. Complies with IEEE 802.3at Power over Ethernet (Po E) The GS-1008P features 8 IEEE 802.3at Power over Ethernet (Po E) ports, which supply up to 30 watts of power per port. It can convert standard 100-240V AC power into low-voltage DC, which runs over existing LAN cables to supply power to IEEE 802.3at compliant network accessories. The GS-1008P also features Po Edetection, to verify whether the connected device is IEEE 802.3at compliant; if it is not a Po E device, only data will be sent through the LAN cable. The GS-1008P can connect with a variety of Po E products, including access points, IP cameras & IP phones. It is the best solution for when power outlets are difficult to install or the power outlets are too far from the device. No Special Networking Cable Required The standard Cat-5 Ethernet cable is used to link the GS-1008P & the powered devices. This Ethernet cable can transmit both data & power. No separate power cable is needed for the powered devices, thus reducing installation time & costs. Fan-Less Design Since the fan-less design ensures quiet operation in small office spaces, the GS-1008P is an ideal solution for SOHO environments. ...

The GS-1008P is an 8-port 10/100/1000BASE switch with 8 Po E ports, designed for use in small or medium sized network environments. This product is compact in size, making it ideal for users with limited space. It also gives users the option of installing it in a 19" cabinet with rack-mount kits or underneath a desk. Complies with IEEE 802.3at Power over Ethernet (Po E) The GS-1008P features 8 IEEE 802.3at Power over Ethernet (Po E) ports, which supply up to 30 watts of power per port. It can convert standard 100-240V AC power into low-voltage DC, which runs over existing LAN cables to supply power to IEEE 802.3at compliant network accessories. The GS-1008P also features Po Edetection, to verify whether the connected device is IEEE 802.3at compliant; if it is not a Po E device, only data will be sent through the LAN cable. The GS-1008P can connect with a variety of Po E products, including access points, IP cameras & IP phones. It is the best solution for when power outlets are difficult to install or the power outlets are too far from the device. No Special Networking Cable Required The standard Cat-5 Ethernet cable is used to link the GS-1008P & the powered devices. This Ethernet cable can transmit both data & power. No separate power cable is needed for the powered devices, thus reducing installation time & costs. Fan-Less Design Since the fan-less design ensures quiet operation in small office spaces, the GS-1008P is an ideal solution for SOHO environments. ...

The GS-1008P is an 8-port 10/100/1000BASE switch with 8 Po E ports, designed for use in small or medium sized network environments. This product is compact in size, making it ideal for users with limited space. It also gives users the option of installing it in a 19" cabinet with rack-mount kits or underneath a desk. Complies with IEEE 802.3at Power over Ethernet (Po E) The GS-1008P features 8 IEEE 802.3at Power over Ethernet (Po E) ports, which supply up to 30 watts of power per port. It can convert standard 100-240V AC power into low-voltage DC, which runs over existing LAN cables to supply power to IEEE 802.3at compliant network accessories. The GS-1008P also features Po Edetection, to verify whether the connected device is IEEE 802.3at compliant; if it is not a Po E device, only data will be sent through the LAN cable. The GS-1008P can connect with a variety of Po E products, including access points, IP cameras & IP phones. It is the best solution for when power outlets are difficult to install or the power outlets are too far from the device. No Special Networking Cable Required The standard Cat-5 Ethernet cable is used to link the GS-1008P & the powered devices. This Ethernet cable can transmit both data & power. No separate power cable is needed for the powered devices, thus reducing installation time & costs. Fan-Less Design Since the fan-less design ensures quiet operation in small office spaces, the GS-1008P is an ideal solution for SOHO environments. ...

The GS-1008PH is an 8-port 10/100/1000BASE switch with 4 Po E ports, designed for use in small or medium sized network environments. This product is compact in size, making it ideal for users with limited space. It also gives users the option of installing it in a 19" cabinet with rack-mount kits or underneath a desk. Complies with IEEE 802.3at Power over Ethernet (Po E) The GS-1008PH features 4 IEEE 802.3at Power over Ethernet (Po E) ports, which supply up to 30 watts of power per port. It can convert standard 100-240V AC power into low-voltage DC, which runs over existing LAN cables to supply power to IEEE 802.3at compliant network accessories. The GS-1008PH also features Po Edetection, to verify whether the connected device is IEEE 802.3at compliant; if it is not a Po E device, only data will be sent through the LAN cable. The GS-1008PH can connect with a variety of Po E products, including access points, IP cameras & IP phones. It is the best solution for when power outlets are difficult to install or the power outlets are too far from the device. No Special Networking Cable Required The standard Cat-5 Ethernet cable is used to link the GS-1008PH & the powered devices. This Ethernet cable can transmit both data & power. No separate power cable is needed for the powered devices, thus reducing installation time & costs. Fan-Less Design Since the fan-less design ensures quiet operation in small office spaces, the GS-1008PH is an ideal solution for SOHO environments. ...

The GS-1008PH is an 8-port 10/100/1000BASE switch with 4 Po E ports, designed for use in small or medium sized network environments. This product is compact in size, making it ideal for users with limited space. It also gives users the option of installing it in a 19" cabinet with rack-mount kits or underneath a desk. Complies with IEEE 802.3at Power over Ethernet (Po E) The GS-1008PH features 4 IEEE 802.3at Power over Ethernet (Po E) ports, which supply up to 30 watts of power per port. It can convert standard 100-240V AC power into low-voltage DC, which runs over existing LAN cables to supply power to IEEE 802.3at compliant network accessories. The GS-1008PH also features Po Edetection, to verify whether the connected device is IEEE 802.3at compliant; if it is not a Po E device, only data will be sent through the LAN cable. The GS-1008PH can connect with a variety of Po E products, including access points, IP cameras & IP phones. It is the best solution for when power outlets are difficult to install or the power outlets are too far from the device. No Special Networking Cable Required The standard Cat-5 Ethernet cable is used to link the GS-1008PH & the powered devices. This Ethernet cable can transmit both data & power. No separate power cable is needed for the powered devices, thus reducing installation time & costs. Fan-Less Design Since the fan-less design ensures quiet operation in small office spaces, the GS-1008PH is an ideal solution for SOHO environments. ...

Acting as a bridge between the wired Ethernet & the 2.4 G Hz wireless IEEE 802.11b/g/n, this wireless access point let your wireless client stations access both the wired & the wireless network nodes. Universal Repeater Mode The Universal Repeater function could extend the coverage & signal strength for the current wireless environment. This standardized function is compatible with other wireless APs & Routers. Users can use this feature to build up a large wireless network in a huge space like airports, hotels & schools...etc. Robust Wireless Security with WPA & WPA2 Except for the basic security control by ESSID & 64/128 bit key length WEP encryption, this access point also supports the advanced security features, like MAC access control, IEEE 802.1x authentication, TKIP, AES & hidden ESSID. It provides a total solution for you to build up a secure wireless network environment that can prevent from all kinds of hacker intrusion. Web Configuration You can configure this access point through the friendly Web user interface with a browser. Complies with the IEEE 802.11b/g & IEEE802.11n standards. Supports 2.400~2.4835 G Hz frequency b&. High data rate up to 300 Mbps network speed. Auto rate fallback in case of obstacles or interferences. Supports point-to-point & point-to-multi point bridge function. Supports WDS (Wireless Distributed System) repeater mode. Supports Universal Repeater mode. Supports AP Client mode. Supports four sets of ESSID to group the different wireless networks. Supports roaming link integrity. Provides 64/128 bit key length WEP data encryption. Supports WPA, WPA2 security enhanced function (pre-shared key, 802.1x, TKIP, AES.. .). Supports WPS (Wi-Fi Protected Setup) function. Provides MAC access control. Provides hidden SSID function. Supports Web-based configuration. Firmware upgradeable via Web browser. ...

Compliant with IEEE 802.3z Gigabit Ethernet, & fiber channel standard Industry standard SFP package Single 3.3V power supply Simplex/duplex LC connector Up to 1.25 Gb/s bi-directional data links Die cast metal housing for low EMI Hot pluggable Class 1 laser product complies with EN 60825-1 ...

- Compliant with IEEE 802.3z Gigabit Ethernet, & Fiber Channel standard
- Compatible module to AGM731F
- Industry standard

...

Indoor 9d Bi Omni-directional Desktop Antenna -Complies with IEEE802.11b/g/n standards -9d Bi high gain antenna with desktop antenna stand -Universal RP-SMA connector to fit most wireless devices -Omni-directional antenna for radial coverage -User-friendly mounting kit The Edimax EA-IO9D is a high performance 9d Bi omni-directional antenna, designed to improve the wireless network signal & coverage in your home & office. ** Wireless signal & distance improvement** When connected to a wireless access point or router, the EA-IO9D increases the wireless coverage area. The antenna also improves the transmission range when the antenna is connected to a wireless adaptor. **9d Bi high gain performance antenna** The antenna is capable of rotating 360 degrees. ** Universal RP-SMA connector for flexible connections** The antenna is not only compatible with Edimax devices, but also with most wireless devices equipped with a RP-SMA interface. ** Signal transmission in all directions** The antenna is omni-directional so it transmits & receives signals from all directions. It is the best solution for radial coverage. ** No software or driver needed** All you have to do is to unscrew the original antenna from your device & replace it with the EA-IO9D. The antenna starts to work as soon as it is put into position. ...

Next-Generation Wireless Networking The Edimax BR-6478AC router supports the next generation IEEE 802.11ac wireless standard, meaning higher data rates in the 5 G Hz b&. With 300 Mbps speeds in the 2.4 G Hz band & 867 Mbps speeds in 5 G Hz, the BR-6478AC is ideal for HD video streaming & large file transfers. The router is also backward compatible with 802.11a/b/g/n to ensure compatibility with legacy Wi-Fi devices. Concurrent Dual-Band Wi-Fi & Gigabit Ethernet Connectivity The Edimax BR-6478AC router provides simultaneous 2.4 G Hz (802.11n) & 5 G Hz (802.11ac) wireless network connectivity for maximum flexibility of use. in addition, the BR-6478AC router features four gigabit LAN ports & one gigabit WAN port, offering data rates of up to a staggering 1000 Mbps for users with the need for maximum network performance. With gigabit Ethernet connectivity, the BR-6478AC can provide users a fast & smooth media streaming or network gaming experience. Edimaxs Revolutionary i Qo S i Qo S is Edimaxs solution for a quicker, easier, & more effective way to manage Internet bandwidth. While Quality of Service (Qo S) functionality is a common feature in routers across the market, typically only advanced users have the knowledge required to set up the complex parameters. Edimax though has redesigned Qo S with user-friendliness & accessibility in mind. A simple & intuitive user interface allows users to arrange bandwidth priority settings in just a few clicks. With i Qo S, you can enjoy gaming, video streaming, Vo IP applications & BT clients at the same time without the usual nightmare of lag & interruptions. An original, efficient & effective means of managing your Internet bandwidth. WPS (Wi-Fi Protected Setup) Button & Built-In WLAN On/ Off Switch The Edimax BR-6478AC allows users to build secure connections with WPS enabled wireless devices simply by pressing the WPS button
- there is no need for the hassle of complex set up & configuration pro
...