The ES-5808P is 8-port desktop Po E Web smart Fast Ethernet switch that is designed for small or medium network environment to strengthen then network connection. This compact size design makes the ES-5808P ideal for users with limited space. The ES-5808P features 8 IEEE 802.3af Power over Ethernet (Po E) ports which supply the electricity up to 15.4 watts per port. The ES-5808P also features Po E detection to verify whether the connected device is IEEE 802.3af compliant or not. If it is not a Po E device (PE), only the data will be sent through LAN cable. The ES-5808P can connect with different Po E products. It is the best solution where the power outlets are difficult to install or the power outlets are far to the device. ...

ES-5800G is Edimaxs smart-green Ethernet switch with gigabit speed that lessens energy-wastage to increase energy-efficiency. No more sluggish or failed, large-file transfers because this switch facilitates rapid, large-file transfers as well. ES-5800G is the ideal, energy-saving switch integrated with eight 10/100/1000 Mbps gigabit ports. It is designed to meet the increased demands of transferring large files speedily across networks. The switch detects the length of the Ethernet cable connection & automatically supplies the right amount of energy. It also reduces power consumption when ports are idle. Enjoy guaranteed, quick data transfers with ES-5800G. It creates a high-speed gigabit network, & users benefit from its enhanced performance & reliability. The ES-5800G complies with IEEE802.3, IEEE802.3u & IEEE802.3ab standards. Using non-blocking switching architecture, your network is equipped with full-wire speed connections. It activates flow control for full-duplex mode & back pressure for half-duplex mode that ensure reliable data transfers & help prevent data loss. The ES-5800G supports jumbo frame, which means that you can extend the Ethernet frame size to a maximum of 9600 bytes to increase data rates. This cost-efficient switch is the best choice for small office/home office needs. The ES-5800G easy "plug & play" installation comes with auto-MDI/MDI-X support. Use either a straight-through or cross-over Ethernet cable & connect 10, 100 & 1000 Mbps devices into ES-5800G, & the switch will automatically detect suitable cable & device speeds for peak performance. ...

The ES-5800G V2 is a 10/100/1000 Mbps Ethernet Desktop unmanaged switch designed to enhance network performance in a compact form factor, & with outstanding performance & high efficiency. The switch uses store & forward packet-switching technology which offers reliable data transfer. This switch is ideal for network connectivity for the SOHO environment. The ES-5800G V2 with plastic housing offers a cost-effective Gigabit Ethernet solution for users to easily extend home networks & to fulfill their online gaming, multimedia transferring & streaming needs. The plug-&-play design allows users to easily connect network devices such as PCs, network storages & print servers to the home network without manual configuration involved. IEEE Energy Efficient Ethernet (EEE) compliance saves power The Switch ES-5800G V2 offers environmental efficiency with Fast Ethernet speeds critical for next-generation network applications. To comply with the IEEE802.3az standard, the Switch ES-5800G V2 provides power saving functions to reduce energy consumption to help business save cost. Inactive linkdetection The power usage adjustment feature automatically reduces power usage when any shut down network device or inactive link is detected. That is, power consumption of the switch can be adjusted according to the link status or the number of active network devices when possible. Cable length detection The devices equipped with this green feature can automatically detect the length of connected Ethernet cables & adjust power usage accordingly. The shorter the cable length, the less power it consumes. Supports High-Speed Networking & Jumbo Frames The ES-5800G V2 is an excellent solution to expand your Gigabit network. With Gigabit speed, the ES-5800G V2 gives high flexibility & high bandwidth connectivity to servers, workstations & other attached devices. It enables you to save time when transferring large files. In addition, it also s ...

The ES-3308P is a 10/100 Mbps unmanaged Ethernet desktop switch designed to enhance network performance. Its compact, sleek design offers outstanding performance & high efficiency, using store & forward packet-switching technology to provide reliable data transfers, ideal for network connectivity in the SOHO environment. To extend home networks or meet online gaming, multimedia transfer or streaming requirements the ES-3308P is a cost-effective Fast Ethernet solution. The plug-&-play design ensures users can easily connect network devices such as PCs, network-attached storage or print servers to a home network with no manual configuration necessary. Supports Auto-Negotiation Each of the ES-3308 Ps ports automatically detect whether connected network devices are running at 10 Mbps or 100 Mbps & half-duplex or full-duplex mode, & adjusts the speed & mode accordingly ensuring easy & hassle-free operation. Supports Non-Blocking Wire Speed The ES-3308P forwards & receives traffic seamlessly with its non-blocking wire-speed. Every port of the ES-3308P supports speeds up to 200 Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices & allowing you to run a high speed network smoothly. IEEE Energy Efficient Ethernet (EEE) Compliance Along with the Fast Ethernet speeds critical for next-generation network applications, the ES-3308P offers environmental efficiency. To comply with the IEEE802.3az standard, the ES-3308P provides power saving functionality to reduce energy consumption & save costs: Inactive Link Detection When a network device is shut down and/or an inactive link is detected, the power usage adjustment feature automatically reduces power usage. The switchs power consumption will be dynamically adjusted according to the link status & the number of active network devices. Cable Length Detection Devices equipped with this feature automatically detect the length of con ...

The ES-3308P is a 10/100 Mbps unmanaged Ethernet desktop switch designed to enhance network performance. It's compact, sleek design offers outstanding performance & high efficiency, using store & forward packet-switching technology to provide reliable data transfers, ideal for network connectivity in the SOHO environment. To extend home networks or meet online gaming, multimedia transfer or streaming requirements the ES-3308P is a cost-effective Fast Ethernet solution. The plug-&-play design ensures users can easily connect network devices such as PCs, network-attached storage or print servers to a home network with no manual configuration necessary. Supports Auto-Negotiation Each of the ES-3308P's ports automatically detect whether connected network devices are running at 10 Mbps or 100 Mbps & half-duplex or full-duplex mode, & adjusts the speed & mode accordingly ensuring easy & hassle-free operation. Supports Non-Blocking Wire Speed The ES-3308P forwards & receives traffic seamlessly with its non-blocking wire-speed. Every port of the ES-3308P supports speeds up to 200 Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices & allowing you to run a high speed network smoothly. IEEE Energy Efficient Ethernet (EEE) Compliance Along with the Fast Ethernet speeds critical for next-generation network applications, the ES-3308P offers environmental efficiency. To comply with the IEEE802.3az standard, the ES-3308P provides power saving functionality to reduce energy consumption & save costs: Inactive Link Detection When a network device is shut down and/or an inactive link is detected, the power usage adjustment feature automatically reduces power usage. The switch's power consumption will be dynamically adjusted according to the link status & the number of active network devices. Cable Length Detection Devices equipped with this feature automatically detect the length of con ...

The ES-1008P is an 8-port Fast Ethernet switch with 8 Po E ports, designed for use in small or medium sized network environments. The devices compact size makes the ES-1008P ideal for users with limited space. Complies with IEEE 802.3at Power over Ethernet (Po E) The ES-1008P features 8 IEEE 802.3at Power over Ethernet (Po E) ports, which supply up to 30 watts of power per port. It can convert standard 100-240V AC power into low-voltage DC, which runs over existing LAN cables to supply power to IEEE 802.3at compliant network accessories. The ES-1008P also features Po Edetection, to verify whether the connected device is IEEE 802.3at compliant; if it is not a Po E device, only data will be sent through the LAN cable. The ES-1008P can connect with a variety of Po E products, including access points, IP cameras & IP phones. It is the best solution for when power outlets are difficult to install or the power outlets are too far from the device. No Special Networking Cable Required The standard Cat-5 Ethernet cable is used to link the ES-1008P & the powered devices. This Ethernet cable can transmit both data & power. No separate power cable is needed for the powered devices, thus reducing installation time & costs. ...

The ES-1008P is an 8-port Fast Ethernet switch with 8 Po E ports, designed for use in small or medium sized network environments. The device's compact size makes the ES-1008P ideal for users with limited space. Complies with IEEE 802.3at Power over Ethernet (Po E) The ES-1008P features 8 IEEE 802.3at Power over Ethernet (Po E) ports, which supply up to 30 watts of power per port. It can convert standard 100-240V AC power into low-voltage DC, which runs over existing LAN cables to supply power to IEEE 802.3at compliant network accessories. The ES-1008P also features Po Edetection, to verify whether the connected device is IEEE 802.3at compliant; if it is not a Po E device, only data will be sent through the LAN cable. The ES-1008P can connect with a variety of Po E products, including access points, IP cameras & IP phones. It is the best solution for when power outlets are difficult to install or the power outlets are too far from the device. No Special Networking Cable Required The standard Cat-5 Ethernet cable is used to link the ES-1008P & the powered devices. This Ethernet cable can transmit both data & power. No separate power cable is needed for the powered devices, thus reducing installation time & costs. ...

The ES-1008P is an 8-port Fast Ethernet switch with 8 Po E ports, designed for use in small or medium sized network environments. The device's compact size makes the ES-1008P ideal for users with limited space. Complies with IEEE 802.3at Power over Ethernet (Po E) The ES-1008P features 8 IEEE 802.3at Power over Ethernet (Po E) ports, which supply up to 30 watts of power per port. It can convert standard 100-240V AC power into low-voltage DC, which runs over existing LAN cables to supply power to IEEE 802.3at compliant network accessories. The ES-1008P also features Po Edetection, to verify whether the connected device is IEEE 802.3at compliant; if it is not a Po E device, only data will be sent through the LAN cable. The ES-1008P can connect with a variety of Po E products, including access points, IP cameras & IP phones. It is the best solution for when power outlets are difficult to install or the power outlets are too far from the device. No Special Networking Cable Required The standard Cat-5 Ethernet cable is used to link the ES-1008P & the powered devices. This Ethernet cable can transmit both data & power. No separate power cable is needed for the powered devices, thus reducing installation time & costs. ...

The GS-1008P is an 8-port 10/100/1000BASE switch with 8 Po E ports, designed for use in small or medium sized network environments. This product is compact in size, making it ideal for users with limited space. It also gives users the option of installing it in a 19" cabinet with rack-mount kits or underneath a desk. Complies with IEEE 802.3at Power over Ethernet (Po E) The GS-1008P features 8 IEEE 802.3at Power over Ethernet (Po E) ports, which supply up to 30 watts of power per port. It can convert standard 100-240V AC power into low-voltage DC, which runs over existing LAN cables to supply power to IEEE 802.3at compliant network accessories. The GS-1008P also features Po Edetection, to verify whether the connected device is IEEE 802.3at compliant; if it is not a Po E device, only data will be sent through the LAN cable. The GS-1008P can connect with a variety of Po E products, including access points, IP cameras & IP phones. It is the best solution for when power outlets are difficult to install or the power outlets are too far from the device. No Special Networking Cable Required The standard Cat-5 Ethernet cable is used to link the GS-1008P & the powered devices. This Ethernet cable can transmit both data & power. No separate power cable is needed for the powered devices, thus reducing installation time & costs. Fan-Less Design Since the fan-less design ensures quiet operation in small office spaces, the GS-1008P is an ideal solution for SOHO environments. ...

The GS-1008P is an 8-port 10/100/1000BASE switch with 8 Po E ports, designed for use in small or medium sized network environments. This product is compact in size, making it ideal for users with limited space. It also gives users the option of installing it in a 19" cabinet with rack-mount kits or underneath a desk. Complies with IEEE 802.3at Power over Ethernet (Po E) The GS-1008P features 8 IEEE 802.3at Power over Ethernet (Po E) ports, which supply up to 30 watts of power per port. It can convert standard 100-240V AC power into low-voltage DC, which runs over existing LAN cables to supply power to IEEE 802.3at compliant network accessories. The GS-1008P also features Po Edetection, to verify whether the connected device is IEEE 802.3at compliant; if it is not a Po E device, only data will be sent through the LAN cable. The GS-1008P can connect with a variety of Po E products, including access points, IP cameras & IP phones. It is the best solution for when power outlets are difficult to install or the power outlets are too far from the device. No Special Networking Cable Required The standard Cat-5 Ethernet cable is used to link the GS-1008P & the powered devices. This Ethernet cable can transmit both data & power. No separate power cable is needed for the powered devices, thus reducing installation time & costs. Fan-Less Design Since the fan-less design ensures quiet operation in small office spaces, the GS-1008P is an ideal solution for SOHO environments. ...