The Dray Tek Vigor AP-810 is a standalone wireless access point, ideal for adding wireless connectivity to an existing LAN, or for expanding the range of an existing wireless LAN by using the WDS features. It can also be used as part of the Dray Tek managed wireless system (see details here). The AP-810 replaces our popular AP-800 model, adding full compatibility with our managed wireless platform. Wireless Security The AP-810 features multiple levels of wireless security. Encryption using WEP, WPA, WPA2 (802.11i) is available you can also use the access control list (ACL) to specify the hardware addresses of clients which are permitted to connect (by MAC hardware address). Any unauthorised hardware is refused access. For additional user authentication, you can activate 802.1x RADIUS (Remote Authentication Dial-in User Service) which means that you can centrally manage & store user names & passwords either within the AP-810 setup itself (thus not needing any external server) on an external radius server which can permit time limited, temporary or continuous access to your clients as required. The Vigor AP-810 supports the 802.1q VLAN protocol so that if it is connected to an 802.1q enabled LAN, it can split tagged data (whether its different subnets or intended for different users) & broadcast each on its own SSID. This means, for example, that your guest Wi Fi access is provided on a separate isolated SSID with no access to your company data/devices. USB (Universal Serial Bus) Printer Port The AP-810 has a USB (Universal Serial Bus) interface into which you can connect a regular printer. That printer is then accessible from any wireless or wired PC which connects to the AP-810, or a PC anywhere else on the network to whick the AP-810 is connected. This is ideal to provide printer access to wireless laptops but could also be used for installing a printer elsewhere in your home/office by using a pair of AP-810s to make a bridge. WMM
- Wi Fi Multimedia The AP-810 implements intelli
...

The Dray Tek Vigor AP-810 is a standalone wireless access point, ideal for adding wireless connectivity to an existing LAN, or for expanding the range of an existing wireless LAN by using the WDS features. It can also be used as part of the Dray Tek managed wireless system (see details here). The AP-810 replaces our popular AP-800 model, adding full compatibility with our managed wireless platform. Wireless Security The AP-810 features multiple levels of wireless security. Encryption using WEP, WPA, WPA2 (802.11i) is available you can also use the access control list (ACL) to specify the hardware addresses of clients which are permitted to connect (by MAC hardware address). Any unauthorised hardware is refused access. For additional user authentication, you can activate 802.1x RADIUS (Remote Authentication Dial-in User Service) which means that you can centrally manage & store user names & passwords either within the AP-810 setup itself (thus not needing any external server) on an external radius server which can permit time limited, temporary or continuous access to your clients as required. The Vigor AP-810 supports the 802.1q VLAN protocol so that if it is connected to an 802.1q enabled LAN, it can split tagged data (whether its different subnets or intended for different users) & broadcast each on its own SSID. This means, for example, that your guest Wi Fi access is provided on a separate isolated SSID with no access to your company data/devices. USB (Universal Serial Bus) Printer Port The AP-810 has a USB (Universal Serial Bus) interface into which you can connect a regular printer. That printer is then accessible from any wireless or wired PC which connects to the AP-810, or a PC anywhere else on the network to whick the AP-810 is connected. This is ideal to provide printer access to wireless laptops but could also be used for installing a printer elsewhere in your home/office by using a pair of AP-810s to make a bridge. WMM
- Wi Fi Multimedia The AP-810 implements intelli
...

Vigor AP-900 Managed Dual-Band Wireless Access Point The Dray Tek Vigor AP-900 is a wireless access point which can be operated in standalone or centrally managed/monitored mode (by use of a central Dray Tek management product
- feature due later in 2014 as a free firmware upgrade). The AP-900 is a high

Specification professional access point providing reliable & flexible coverage to all manner of applications. A vast array of security & management features helps the AP-900 to improve & protect flexibility & integrity of your wireless LAN. The Vigor AP-900 is ideal for adding wireless connectivity to an existing LAN, or for expanding the range of an existing wireless LAN by using the WDS repeater features. Simultaneous Dual-Band Operation The Vigor AP-900 supports simultaneous operation of the common 2.4 Ghz band & the new 5 Ghz b&. The 5 Ghz band is far less congested so if your PCs or other devices support the 5 Ghz b&, you can use that. The Vigor AP-900 operates both bands at the same time, so your devices can use either band & each has its own bandwidth so overall wireless capacity is also increased. If you want to add 5 Ghz band support to your PC/laptop (assuming it doesnt already support it), you can use the Dray Tek N65 USB (Universal Serial Bus) adaptor. Gigabit Ethernet Ports The AP-900 has five wired Ethernet ports (separated into two distinct separated LANs). LAN A & LAN B can be fed separately & in turn broadcast on independent & isolated SSIDs. As the ports are all Gigabit, you can be sure that the AP-900 is fed at the maximum speed in order to fully satisfy the full speed of both 2/4 & 5 Ghz bands simultaneously. The four ports on LAN A are particularly of use if you are using the AP-900 as a wireless bridge as you can then connect wired PCs or devices to it. LAN Port 1 on LAN-A is also used as the Po E input if youre powering the AP-900 by Po E. Central Management A feature due later in 2014 (via a free firmware


...

Vigor AP-900 Managed Dual-Band Wireless Access Point The Dray Tek Vigor AP-900 is a wireless access point which can be operated in standalone or centrally managed/monitored mode (by use of a central Dray Tek management product
- feature due later in 2014 as a free firmware upgrade). The AP-900 is a high

Specification professional access point providing reliable & flexible coverage to all manner of applications. A vast array of security & management features helps the AP-900 to improve & protect flexibility & integrity of your wireless LAN. The Vigor AP-900 is ideal for adding wireless connectivity to an existing LAN, or for expanding the range of an existing wireless LAN by using the WDS repeater features. Simultaneous Dual-Band Operation The Vigor AP-900 supports simultaneous operation of the common 2.4 Ghz band & the new 5 Ghz b&. The 5 Ghz band is far less congested so if your PCs or other devices support the 5 Ghz b&, you can use that. The Vigor AP-900 operates both bands at the same time, so your devices can use either band & each has its own bandwidth so overall wireless capacity is also increased. If you want to add 5 Ghz band support to your PC/laptop (assuming it doesn't already support it), you can use the Dray Tek N65 USB (Universal Serial Bus) adaptor. Gigabit Ethernet Ports The AP-900 has five wired Ethernet ports (separated into two distinct separated LANs). LAN A & LAN B can be fed separately & in turn broadcast on independent & isolated SSIDs. As the ports are all Gigabit, you can be sure that the AP-900 is fed at the maximum speed in order to fully satisfy the full speed of both 2/4 & 5 Ghz bands simultaneously. The four ports on LAN A are particularly of use if you are using the AP-900 as a wireless bridge as you can then connect wired PCs or devices to it. LAN Port 1 on LAN-A is also used as the Po E input if you're powering the AP-900 by Po E. Central Management A feature due later in 2014 (via a free firmware


...

The Dray Tek Vigor AP-910c is a wireless access point which can be operated in standalone or centrally managed/monitored mode (with the use of a central Dray Tek management product
- see later). The AP-910c is a high

Specification professional access point providing reliable & flexible coverage to all manner of applications. A vast array of security & management features helps the AP-910c improve & protect flexibility & integrity of your wireless LAN. The Vigor AP-910c is ideal for adding wireless connectivity to an existing LAN, or for expanding the range of an existing wireless LAN by using the WDS repeater features. The ceiling format of the unit means that it can provide unobstructed coverage to the area around it & aesthetically blends into any home or office environment thanks to its shape, size & hidden cable entry. The AP-910c can also be wall mounted. For both options, a circular mounting plate (included with the unit) is fitted & then the AP-910c is attached. The AP-910c can be used together with our other access points (AP-710, AP-810 & AP-910c). Simultaneous Dual-Band Operation & Extended 5 Ghz Bands The Vigor AP-910c supports simultaneous operation of the common 2.4 Ghz band & the new 5 Ghz b&. The 5 Ghz band is far less congested so if your PCs or other devices support the 5 Ghz b&, you can use that. The Vigor AP-910c operates both bands at the same time, so your devices can use either band & each has its own bandwidth so overall wireless capacity is also increased. The 5 Ghz supports the full range of extended domestic 5 Ghz channels, due to its support for DFS/TPC. You can select all 5 Ghz channels up to channel 140, as opposed to just the 4 ' Band A-Lower' channels (which provides only two non-overlapping channels @ 80 Mhz channel width). Mounting & Coverage The AP-910c is designed to be installed on ceilings in order to serve the area below it. The cables (Ethernet or Power) can reach the AP-910c from the rear


...

Vigor Talk ATA-24 SH could provide large Vo IP ports which is designed for ISP/SI. Vigor Talk ATA-24 SH not only provides high quality call service. but also supports various Vo IP protocals & supplementary services. The Vigor Talk ATA-24 SH combines guaranteed Bandwidth, remote management & administrative functions to meet increasing demands for higher reliability in todays broadband environment. The Do S (Denial of Service) function helps to detect & mitigate Do S attacks such as flooding-type & vulnerability attacks. The SNMP-based of Vigor CMS is the management software offers an easy way to remotely set up configurations, update system status, display alarm events, monitor system behaviors, perform diagnostics & download firmware & email attacking alert. For installation, status monitor, & management of Vigor Talk ATA-24 SH of router, it will be easily accomplished through a built-in Web user interface or Telnet command line interface. ...

Vigor Talk ATA-24 SH could provide large Vo IP ports which is designed for ISP/SI. Vigor Talk ATA-24 SH not only provides high quality call service. but also supports various Vo IP protocals & supplementary services. The Vigor Talk ATA-24 SH combines guaranteed Bandwidth, remote management & administrative functions to meet increasing demands for higher reliability in today's broadband environment. The Do S (Denial of Service) function helps to detect & mitigate Do S attacks such as flooding-type & vulnerability attacks. The SNMP-based of Vigor CMS is the management software offers an easy way to remotely set up configurations, update system status, display alarm events, monitor system behaviors, perform diagnostics & download firmware & email attacking alert. For installation, status monitor, & management of Vigor Talk ATA-24 SH of router, it will be easily accomplished through a built-in Web user interface or Telnet command line interface. ...

The Vigor IPPBX 2820 is an IP-PBX (i PBX) integrated with Dray Teks fully-featured Vigor 2820 ADSL Router. Voice-over-IP PBX ADSL Firewall/ Router (See Standard Vigor 2820 for details) 802.11n Wireless LAN Up to 30 Vo IP Extensions (local or remote) Up to 6 SIP Trunks & 20 Channels Voicemail Hunt Groups Call Diversion/ Transfer IVR (Voice Auto-Attendant) ISDN Interface Analogue Phone Interface (with POTS failover) Ideal partnered with the Vigor Phone 350 ...

The Vigor IPPBX 2820 is an IP-PBX (i PBX) integrated with Dray Tek's fully-featured Vigor 2820 ADSL Router. Voice-over-IP PBX ADSL Firewall/ Router (See Standard Vigor 2820 for details) 802.11n Wireless LAN Up to 30 Vo IP Extensions (local or remote) Up to 6 SIP Trunks & 20 Channels Voicemail Hunt Groups Call Diversion/ Transfer IVR (Voice Auto-Attendant) ISDN Interface Analogue Phone Interface (with POTS failover) Ideal partnered with the Vigor Phone 350 ...

The Dray Tek Vigor N65 is a USB (Universal Serial Bus) wireless adapter for Windows PCs supporting dual-band selectable wireless bands
-
...