The Vigor 2830 is the latest generation of our flagship ADSL router/firewall range, winner of the PC Pro wireless router award for three years in a row. This latest series

Includes:: support for professional features such as VLAN tagging, Gigabit Ethernet & Wi Fi (ess models). The Vigor 2830's secondary WAN interface can be connected to other modems now or later (e.g. a second ADSL, BT Infinity or cable modem etc.). Packed with features, the Vigor 2830 offers truly comprehensive ADSL connectivity & security. Compatible with all variants of ADSL (including ADSLMax, ADSL2+ & Annex M) the Vigor 2830 can also be used for cable-modem & leased line applications using its additional gigabit ethernet WAN port. A four port Gigabit switch on the LAN side provides high speed connectivity for your server or other local PCs, for the highest speed local data transfer. Security features include content filtering, web application controls & new object based firewall management system. Robust & Comprehensive Firewall Security is always taken seriously with Dray Tek routers. The firewall protects against attacks including Do S (Denial of Service) attacks, IP-based attacks & access by unauthorised remote systems. Wireless, Ethernet & VPN are also protected by various protection systems. The latest (' Version 3') Dray Tek object-based firewall allows even more setup flexibility than ever, enabling you to create combinations of users, rules & restrictions to suit multi-departmental organisations. The Vigor 2830 now also allows selective direction firewall rules of LAN to WAN, WAN to LAN or LAN to VPN. In addition, Qo S (Quality of Service Assurance) can now be selectively applied to specific users. IPv 6
- Next Generation Internet Routing The Vigor 2830 now supports IPv 6
- the successor to the current IPv 4 addressing system that has been used since the Internet was first created. IPv 4 address space is full up & IPv 6 allows for much more efficient routing



...

The Vigor 2832 series (including the Vigor 2832n) is our new router/firewall for ADSL lines. Alternative WAN ports can insead provide connectivity to Ethenet feeds, secondary x DSL modems or a 3G/4G cellular service using a supported USB (Universal Serial Bus) adaptor. This latest router series

Includes:: support for professional features such as VLAN tagging, Gigabit Ethernet built-in Wi Fi ('n' models). Packed with professional-level features, the Vigor 2832 series is compatible with all UK variants of ADSL (including ADSL2+ & Annex M) & the Vigor 2832 can also be used for cable-modem, leased line & EFM applications using its Gigabit Ethernet WAN port.

...

The Vigor 2832 features a hugely flexible VLAN system. In its simplest form, each of the four Gigabit LAN ports can be isolated from each other, for example to feed different companies or departments but keeping their local traffic completely separated. For more sophisticated scenarios, the Vigor 2832

Includes:: tagged VLANs (802.1q) whereby data is marked with a VLAN identifier. This identifier can be read by an onward Ethernet switch & directed to specific ports or just passed to the LAN for specific VLAN clients to pick up; priorities can also be applied for LAN-side Qo S.

...

The Vigor 2850 features a hugely flexible VLAN system. In its simplest form, each of the four Gigabit LAN ports can be isolated from each other, for example to feed four different companies or departments but keeping their local traffic completely separated. For more sophisticated scenarios, the Vigor 2850

Includes:: tagged VLANs (802.1q) whereby data is marked with a VLAN identifier. This identifier can be read by an onward Ethernet switch & directed to specific ports or just passed to the LAN for specific VLAN clients to pick up; priorities can also be applied for LAN-side Qo S. The VLANs can each be tied into each of the different IP subnets that the router may also be operating, to provide even more isolation. The Vigor 2850 has built-in user management which means that you can provide Internet access to users based on their own unique login (stored in the router, or on an external Radius server). Accounts can be restricted by schedules or maximum usage times but also any other aspect of the firewall or content filtering can be applied on a user-by-user basis. The Vigor 2850 series provides several independent levels of security including authentication (802.11x) & methods such as MAC address locking & DHCP fixing to restrict access to authorized users only.

...

The Dray Tek Vigor 2860ac AC1600 Triple-WAN Wi Fi ADSL2+ & Fibre Broadband Router is a variant of the popular Dray Tek Vigor 2860 series with the addition of a super fast 802.11ac Wi Fi. It

Includes:: all the same features as the 2060n such as VLAN tagging, Gigabit Ethernet, 3G failover & a Six (6) port Gigabit switch & WLAN AP management feature for deployment of multiple access points such as the Dray Tek Vigor AP-900. ** Wi Fi 802.11ac Dual-Band (1300 Mbps + 300 Mbps)** The Dray Tek Vigor 2860ac features the latest 802.11ac Wi Fi LAN

Specification for speeds up to 1300 Mbps (5 G Hz) & 300 Mbps (2, 4 G Hz). This also

Includes:: a Wi Fi co-processor that provides data processing offload for increased performance, particularly in multi-user environments. It also enables higher performance WDS
- Up to 500 Mb/s which is particularly useful if forming point-to-point Wi Fi bridges. It provides several independent levels of security including encryption (up to WPA2), authentication (802.11x) & methods such as MAC address locking & DHCP fixing to restrict access to authorised users only. The Web interface lets you see how many & which clients are currently connected as well as their current bandwidth usage. An 'instant' block lets you disconnect a Wi Fi user temporarily in case of query. The Wi Fi VLAN facility means that you can isolate Wi Fi clients from each other or from the 'wired' LAN. This Dray Tek Vigor 2860ac also allows guest access with password protection so visitors can use your Wi Fi access, but only with a preset password which you set for them. When the user connects to your Wi Fi LAN, they are first presented with your login screen before any Internet access is permitted. This is in addition to any encryption system you have running. The Multiple SSID features enables you to have up to four distinct or common virtual Wi Fi access points. For example, you could have one for company usage, with access to your company LAN & another for public access which allo






...

The Vigor 2860 series is our new router/firewall which can support either ADSL or VDSL (BT Infinity™/FTTC). This makes the Vigor 2860 ideal ideal for users with ADSL now who might upgrade to VDSL later. Alternative WAN ports can insead provide connectivity to Ethenet feeds, secondary x DSL modems or a 3G cellular service using a USB (Universal Serial Bus) adaptor. This latest router series

Includes:: support for professional features such as VLAN tagging & Gigabit Ethernet Packed with professional-level features, the Vigor 2860 series offers truly comprehensive DSL connectivity & security. Compatible with all UK variants of ADSL (including ADSL2+ & Annex M), VDSL & VDSL2, the Vigor 2860 can also be used for cable-modem, leased line & EFM applications using its Gigabit Ethernet WAN port. On VDSL, the Vigor 2860 series supports the very latest services for speeds up to 80 Mb/s (depending on line quality & length). Vigor 2860 front panel sockets A 6-port Gigabit Ethernet switch on the LAN side provides high speed connectivity for your server, other local PCs or for uplink to a larger Ethernet switch. Comprehensive security features include content filtering, web application controls & an object based firewall management system. Runs on either ADSL or VDSL The Vigor 2860's built in DSL interface will connect to either an ADSL or VDSL line. If you have a second line (of either type) you can add an additional modem (or your existing modem from your other line) to the Vigor 2860's Ethernet WAN ports. You can set the two lines up in load balancing mode, where traffic is split across both of them, or into failover mode, where the other DSL line only kicks-in if your primary DSL line fails (or vice versa). ADSL makes a particularly good method of failover for VDSL because they are delivered differently. VDSL service is provided & powered by a cabinet in your street
- that's where the line terminates. ADSL service, on the other h&, comes all the way from your local e


...

The Vigor 2860 series is our new router/firewall which can support either ADSL or VDSL (BT Infinity™/FTTC). This makes the Vigor 2860 ideal ideal for users with ADSL now who might upgrade to VDSL later. Alternative WAN ports can insead provide connectivity to Ethenet feeds, secondary x DSL modems or a 3G cellular service using a USB (Universal Serial Bus) adaptor. This latest router series

Includes:: support for professional features such as VLAN tagging & Gigabit Ethernet Packed with professional-level features, the Vigor 2860 series offers truly comprehensive DSL connectivity & security. Compatible with all UK variants of ADSL (including ADSL2+ & Annex M), VDSL & VDSL2, the Vigor 2860 can also be used for cable-modem, leased line & EFM applications using its Gigabit Ethernet WAN port. On VDSL, the Vigor 2860 series supports the very latest services for speeds up to 80 Mb/s (depending on line quality & length). Vigor 2860 front panel sockets A 6-port Gigabit Ethernet switch on the LAN side provides high speed connectivity for your server, other local PCs or for uplink to a larger Ethernet switch. Comprehensive security features include content filtering, web application controls & an object based firewall management system. Runs on either ADSL or VDSL The Vigor 2860's built in DSL interface will connect to either an ADSL or VDSL line. If you have a second line (of either type) you can add an additional modem (or your existing modem from your other line) to the Vigor 2860's Ethernet WAN ports. You can set the two lines up in load balancing mode, where traffic is split across both of them, or into failover mode, where the other DSL line only kicks-in if your primary DSL line fails (or vice versa). ADSL makes a particularly good method of failover for VDSL because they are delivered differently. VDSL service is provided & powered by a cabinet in your street
- that's where the line terminates. ADSL service, on the other h&, comes all the way from your local e


...

Vigor 2860 series security firewall router has built-in VDSL2/ADSL2+ modem, plus a second Ethernet WAN port for cable or satellite broadb&, & 2 USB (Universal Serial Bus) ports for 3G/4G mobile broadband access. With the multi-WAN accesses, Vigor 2860 router supports bandwidth management functions such as fail-over & load balancing, making them ideal solutions for reliable & flexible broadband connectivity for small to large enterprises. ...

The Vigor 2860 series (including the Vigor 2860n & Vigor 2860 Vn) is our new router/firewall which can support either ADSL or VDSL (BT Infinity™/FTTC). This makes the Vigor 2860 ideal ideal for users with ADSL now who might upgrade to VDSL later. Alternative WAN ports can insead provide connectivity to Ethenet feeds, secondary x DSL modems or a 3G cellular service using a USB (Universal Serial Bus) adaptor. This latest router series

Includes:: support for professional features such as VLAN tagging, Gigabit Ethernet built-in Wi Fi (n models). Packed with professional-level features, the Vigor 2860 series offers truly comprehensive DSL connetivity & security. Compatible with all UK variants of ADSL (including ADSL2+ & Annex M), VDSL & VDSL2, the Vigor 2860 can also be used for cable-modem, leased line & EFM applications using its Gigabit Ethernet WAN port. On VDSL, the Vigor 2860 series supports the very latest services for speeds up to 80 Mb/s (depending on line quality & length). A 6-port Gigabit Ethernet switch on the LAN side provides high speed connectivity for your server, other local PCs or for uplink to a larger Ethernet switch. Comprehensive security features include content filtering, web application controls & an object based firewall management system. Runs on either ADSL or VDSL The Vigor 2860s built in DSL interface will connect to either an ADSL or VDSL line. If you have a second line (of either type) you can add an additional modem (or your existing modem from your other line) to the Vigor 2860s Ethernet WAN ports. You can set the two lines up in load balancing mode, where traffic is split across both of them, or into failover mode, where the other DSL line only kicks-in if your primary DSL line fails (or vice versa). ADSL makes a particularly good method of failover for VDSL because they are delivered differently. VDSL service is provided & powered by a cabinet in your street
- thats where the line terminates. ADSL service, on the other h&,


...

The Vigor 2860 series (including the Vigor 2860n & Vigor 2860 Vn) is our new router/firewall which can support either ADSL or VDSL (BT Infinity™/FTTC). This makes the Vigor 2860 ideal ideal for users with ADSL now who might upgrade to VDSL later. Alternative WAN ports can insead provide connectivity to Ethenet feeds, secondary x DSL modems or a 3G cellular service using a USB (Universal Serial Bus) adaptor. This latest router series

Includes:: support for professional features such as VLAN tagging, Gigabit Ethernet built-in Wi Fi ('n' models). Packed with professional-level features, the Vigor 2860 series offers truly comprehensive DSL connetivity & security. Compatible with all UK variants of ADSL (including ADSL2+ & Annex M), VDSL & VDSL2, the Vigor 2860 can also be used for cable-modem, leased line & EFM applications using its Gigabit Ethernet WAN port. On VDSL, the Vigor 2860 series supports the very latest services for speeds up to 80 Mb/s (depending on line quality & length). A 6-port Gigabit Ethernet switch on the LAN side provides high speed connectivity for your server, other local PCs or for uplink to a larger Ethernet switch. Comprehensive security features include content filtering, web application controls & an object based firewall management system. Runs on either ADSL or VDSL The Vigor 2860's built in DSL interface will connect to either an ADSL or VDSL line. If you have a second line (of either type) you can add an additional modem (or your existing modem from your other line) to the Vigor 2860's Ethernet WAN ports. You can set the two lines up in load balancing mode, where traffic is split across both of them, or into failover mode, where the other DSL line only kicks-in if your primary DSL line fails (or vice versa). ADSL makes a particularly good method of failover for VDSL because they are delivered differently. VDSL service is provided & powered by a cabinet in your street
- that's where the line terminates. ADSL service, on the other h&,


...