The D-Link Air Premier DWL-3500AP is a thin wireless Access Point designed for use in conjunction with DWS-3024 Wireless Switch in business-class enterprise environments. Designed for indoor installation, this access point provides secure options for network administrators to deploy a highly manageable & extremely robust wireless network. This access point supports Power over Ethernet (Po E) & provides two high-gain antennae for optimal wireless coverage. The Access Point is entirely controlled from the Wireless Switch, i.e. no configuration data is kept at AP level, adding a layer of protection in case of theft or vandalism. Profiles including SSID, IP address, VLAN, security, etc... are only configured once & then applied to the managed APs. If an AP needs swapping, the replacement AP automatically inherits the same configuration, making the process seamless. For installations in areas where power outlets are not readily available, the access point integrates 802.3af Power over Ethernet (Po E). The Wireless Switch will provide power as far as 100m away via standard Ethernet cabling. The DWL-3500AP delivers extremely reliable wireless performance with standard 802.11g wireless throughput rates of up to 54 Mbps. It has the added capability of reaching maximum wireless signal rates of up to 108 Mbps (Turbo mode) powered by D-Link 108G technology. At the same time, the DWL-3500AP remains fully compatible with the IEEE 802.11b & 802.11g standards. The DWL-3500AP supports 64/128/152-bit WEP data encryption, WPA/WPA2 security & multiple SSIDs. MAC Address Filtering, SSID Broadcast Disable can be configured from the switch to set up security & limit outsiders access to the internal network. The DWL-3500AP supports 802.1Q VLAN Tagging & WMM (Wi-Fi Multimedia) for important wireless transmissions such as Vo IP & streaming media applications, delivering critical user-based services, such as prioritized delivery of voice traffic. The DWL-3500AP can b ...

The D-Link Air Premier DWL-3500AP is a thin wireless Access Point designed for use in conjunction with DWS-3024 Wireless Switch in business-class enterprise environments. Designed for indoor installation, this access point provides secure options for network administrators to deploy a highly manageable & extremely robust wireless network. This access point supports Power over Ethernet (Po E) & provides two high-gain antennae for optimal wireless coverage. The Access Point is entirely controlled from the Wireless Switch, i.e. no configuration data is kept at AP level, adding a layer of protection in case of theft or vandalism. Profiles including SSID, IP address, VLAN, security, etc... are only configured once & then applied to the managed APs. If an AP needs swapping, the replacement AP automatically inherits the same configuration, making the process seamless. For installations in areas where power outlets are not readily available, the access point integrates 802.3af Power over Ethernet (Po E). The Wireless Switch will provide power as far as 100m away via standard Ethernet cabling. The DWL-3500AP delivers extremely reliable wireless performance with standard 802.11g wireless throughput rates of up to 54 Mbps. It has the added capability of reaching maximum wireless signal rates of up to 108 Mbps (Turbo mode) powered by D-Link 108G technology. At the same time, the DWL-3500AP remains fully compatible with the IEEE 802.11b & 802.11g standards. The DWL-3500AP supports 64/128/152-bit WEP data encryption, WPA/WPA2 security & multiple SSIDs. MAC Address Filtering, SSID Broadcast Disable can be configured from the switch to set up security & limit outsiders' access to the internal network. The DWL-3500AP supports 802.1Q VLAN Tagging & WMM (Wi-Fi Multimedia) for important wireless transmissions such as Vo IP & streaming media applications, delivering critical user-based services, such as prioritized delivery of voice traffic. The DWL-3500AP can b ...

The DWL-3600AP is a business 802.11n Wi-Fi Access Point. Easy to manage & capable of high data transmission speeds, the DWL-3600AP integrates seamlessly into any existing network infrastructures & can be easily scaled up to meet future demands. The DWL-3600 A Ps 2x 2 MIMO 2.4 G Hz radio delivers up to 300 Mbps 1 of network throughput. In addition, the DWL-3600AP features Radio Protect technology, which ensures all users receive an adequate level of service even in an environment where many users are accessing the network through legacy 802.11b & 802.11g devices. The DWL-3600 A Ps self-configuring cluster makes it is the ideal solution for small businesses that need to deploy multiple Access Points but lack the resources to tackle the complicated task of network management. When a small number of DWL-3600 A Ps is deployed on the network, they may be configured to form a self-configuring cluster. Once the administrator configures the master Access Point, the same configuration can then be applied to all remaining APs. Up to 16 Access points may be used to form a cluster. When deployed in conjunction with D-Links DWC-1000 Wireless Controller, up to 24 DWL-3600AP units can be centrally managed & provisioned, thus enabling the administrator to scale up the Wi-Fi network to cover a very large area. The DWL-3600AP supports the latest standards in Wi-Fi security, including WPA, WPA2, & 802.1x. In addition, the DWL-3600AP supports up to 16 Virtual Access Points (VAP), which allows the administrator to assign different access privileges to different groups of users. When used together with D-Links Wireless Controller, security can be raised to a new level. Rogue APs in the network can be easily detected, & the administrator will be immediately notified of any security threat. When a number of Access Points are deployed close to each other, interference may result if proper RF management is not implemented. When a DWL-3600AP senses a neighbor nearby, it will ...

The DWL-3600AP is a business 802.11n Wi-Fi Access Point. Easy to manage & capable of high data transmission speeds, the DWL-3600AP integrates seamlessly into any existing network infrastructures & can be easily scaled up to meet future demands. The DWL-3600AP's 2x 2 MIMO 2.4 G Hz radio delivers up to 300 Mbps 1 of network throughput. In addition, the DWL-3600AP features Radio Protect technology, which ensures all users receive an adequate level of service even in an environment where many users are accessing the network through legacy 802.11b & 802.11g devices. The DWL-3600 A Ps self-configuring cluster makes it is the ideal solution for small businesses that need to deploy multiple Access Points but lack the resources to tackle the complicated task of network management. When a small number of DWL-3600 A Ps is deployed on the network, they may be configured to form a self-configuring cluster. Once the administrator configures the master Access Point, the same configuration can then be applied to all remaining APs. Up to 16 Access points may be used to form a cluster. When deployed in conjunction with D-Link's DWC-1000 Wireless Controller, up to 24 DWL-3600AP units can be centrally managed & provisioned, thus enabling the administrator to scale up the Wi-Fi network to cover a very large area. The DWL-3600AP supports the latest standards in Wi-Fi security, including WPA, WPA2, & 802.1x. In addition, the DWL-3600AP supports up to 16 Virtual Access Points (VAP), which allows the administrator to assign different access privileges to different groups of users. When used together with D-Link's Wireless Controller, security can be raised to a new level. Rogue APs in the network can be easily detected, & the administrator will be immediately notified of any security threat. When a number of Access Points are deployed close to each other, interference may result if proper RF management is not implemented. When a DWL-3600AP senses a neighbor nearby, it will ...

D-Links next generation Unified Access Point supporting the IEEE 802.11n standard can be flexibly deployed as a st&-alone "fit" wireless Access Point or as a "thin" managed Access Point (AP) manageable from a wireless switch such as D-Links DWS-4026. Businesses can start with an intelligent DWL-8600AP then migrate to a centrally managed solution by integrating the same DWL-8600AP to a D-Link unified wired/wireless switch. With Quadband technology, wireless speeds reach up to 300 Mbps in each frequency band simulnaneously. When managed from the switch, the Access Point does not store any setting locally. Power also comes from the switch via 802.3af Po E. The DWL-8600AP continuously tunes itself for optimal RF channel & signal intensity to provide clients with the best wireless signal. It is also able to scan its RF environment, allowing the switch to detect rogue APs. In addition, DWL-8600AP supports 802.1Q VLAN tagging, Load Balancing among Neighbour Aps, up to 16 SSIDs per radio & is Wi-Fi Multimedia (WMM) certified. ...

The DWL-8600AP is a versatile & powerful indoor access point for business environments. With adjustable antennae the wireless signal can be optimized to given maximum data transmission speeds. The DWL-8600AP can be deployed as a standalone wireless Access Point or used as the foundation for a managed wireless network. ...

The DWL-6600AP Wireless N Dualband Unified Access Point is a best-in-class indoor AP designed specifically for business-class environments. With high data transmission speeds & a load balancing feature, the DWL-6600AP offers high-quality & reliable wireless service. Versatile & powerful, the DWL-6600AP can be flexibly deployed as a standalone wireless Access Point or as a managed Access Point controlled by a D-Link DWC-1000 Wireless Controller. Businesses can start with standalone mode deployment, then migrate to a centrally managed system anytime later. The DWL-6600AP delivers reliable wireless performance with maximum wireless signal rates of up to 300 Mbps in either the 2.4 GHz or 5 GHz mode. Support for Wi-Fi Multimedia (WMM) Quality of Service features makes the DWL-6600AP an ideal Access Point for audio, video, & voice applications. In addition, the load balancing feature ensures maximum performance & best service quality in the wireless environment. For small businesses that need to deploy multiple Access Points but lack the resources to tackle the complicated task of network management, the DWL-6600 A Ps self-configuring cluster feature offers the ideal solution. When a small number of DWL-6600 A Ps is deployed on the network, they may be configured to form a self-configuring cluster. Once the administrator is through with configuring one Access Point, the same configuration can then be applied to all remaining APs. Up to 16 APs may be used to form a cluster. Alternatively, the DWL-6600AP can operate in conjunction with D-Links DWC-1000 Wireless Controller. In this mode, multiple DWL-6600 A Ps can connect directly or indirectly to one of these switches/controllers to provide unparalleled security & wireless mobility for wireless clients. Each DWL-6600AP will be continually tuned by these switches to provide the optimal RF channels & transmission power for all mobile clients, giving them the best wireless signals in both 2.4 GHz & 5.0 GHz ...

The DWL-6600AP Wireless N Dualband Unified Access Point is a best-in-class indoor AP designed specifically for business-class environments. With high data transmission speeds & a load balancing feature, the DWL-6600AP offers high-quality & reliable wireless service. Versatile & powerful, the DWL-6600AP can be flexibly deployed as a standalone wireless Access Point or as a managed Access Point controlled by a D-Link DWC-1000 Wireless Controller. Businesses can start with standalone mode deployment, then migrate to a centrally managed system anytime later. The DWL-6600AP delivers reliable wireless performance with maximum wireless signal rates of up to 300 Mbps in either the 2.4 GHz or 5 GHz mode. Support for Wi-Fi Multimedia (WMM) Quality of Service features makes the DWL-6600AP an ideal Access Point for audio, video, & voice applications. In addition, the load balancing feature ensures maximum performance & best service quality in the wireless environment. For small businesses that need to deploy multiple Access Points but lack the resources to tackle the complicated task of network management, the DWL-6600AP's self-configuring cluster feature offers the ideal solution. When a small number of DWL-6600 A Ps is deployed on the network, they may be configured to form a self-configuring cluster. Once the administrator is through with configuring one Access Point, the same configuration can then be applied to all remaining APs. Up to 16 APs may be used to form a cluster. Alternatively, the DWL-6600AP can operate in conjunction with D-Link's DWC-1000 Wireless Controller. In this mode, multiple DWL-6600 A Ps can connect directly or indirectly to one of these switches/controllers to provide unparalleled security & wireless mobility for wireless clients. Each DWL-6600AP will be continually tuned by these switches to provide the optimal RF channels & transmission power for all mobile clients, giving them the best wireless signals in both 2.4 GHz & 5.0 GHz ...

The DWL-6600AP is designed to be the best-in-class indoor Access Point for business environments. With high data transmission speeds, load balancing features, it can be deployed as a standalone wireless Access Point or used as the foundation for a managed wireless network. ...

The ANT70-1000 directional antenna is a high gain, high-performance dual band antenna for indoor & outdoor installation. Supporting up to 1 km (2.4 G Hz), 1.5 km (5 G Hz) signal range when installed outdoor, & 800 m (2.4 G Hz), 1.2 km (5 G Hz) signal range when installed indoor, this antenna can greatly increase the effective wireless operation range of 802.11a, 802.11b & 802.11g wireless devices. Providing 8d Bi gain for the 2.4 G Hz frequency band & 10d Bi gain for the 5 G Hz frequency b&, this antenna can be connected to a wireless access point or router to improve signal transmission & reception in a directional angle. It is ideal for connecting two networks locating in two different buildings, or in two different locations in a campus. For indoors use, this antenna is ideal for installation in an exhibition hall or a large lobby. The ANT70-1000 antenna is equipped with an N-jack connector & can be mounted on a pole. It can be attached to a wireless device through a provided extension antenna cable. ANT70-1000 is suitable for DWL-8200AP installations. ...