** Room to room seamless Wi-Fi-** Covr keeps you seamlessly connected automatically as you move around your home. No connection drop-offs, no interruptions, just one seamless network. ** Got it covered** Covr’s Smart Roaming technology enables your devices to stay automatically connected to the nearest Covr Point in your home while all the Covr Points work together as one network. That means you can move from room to room or change floors & you’ll stay seamlessly connected to everything you love about the internet without needing to lift a finger. ** Simple set up** As Covr nodes come pre-paired, they’re ready to go straight out of the box. For a quick, PC-free setup: grab your phone, download the app, plug in your Covr Points, & follow the simple app instructions. Connect your smart home devices to Covr with the one-touch WPS button. ** Blends in** Covr’s modern design complements your home's surroundings. Covr is also perfect for bringing the internet with you into your sunny garden, inside hobby sheds & cabins, or for gatherings during a barbecue in the summer. ...

D-Links DXS-3600 10 Gb E L2/L3 switch family consist of new compact, high-performance switches that feature wired-speed 10-Gigabit Ethernet switching, routing, & very low latency. The 1U height & selectable front-to-back or back-to-front air flow make the DXS-3600 series suitable for top-of-rack (To R) deployment in data centers or enterprise & campus aggregation network environments. The DXS-3600 switches have 24 fixed 10 Gb E SFP+ ports & can feature more ports with the addition of an expansion module. The DXS-3600 switches deliver high-performance 10-Gigabit Ethernet switching capacity of up to 960 Gbps & forwarding rates of up to 595.2 Mbps. The switches feature hot-swappable power supplies & fan trays, which enable the switches to be redundant, high availability architecture. The modular power design allows users to select AC or DC power according to where the switch is deployed. When inserting two power modules, the two power modules share the loading & help to extend the lifetime of the other. The DXS-3600 series also features a modular fan design. Three fans can back up each other, providing N+1 redundancy for the system. If one of the fans fails, the other fans will increase their speed by automatically detecting the system temperature. Both power & fan modules are hot-swappable, which minimizes the downtime of the DXS-3600 series. ...

D-Link's DXS-3600 10 Gb E L2/L3 switch family consist of new compact, high-performance switches that feature wired-speed 10-Gigabit Ethernet switching, routing, & very low latency. The 1U height & selectable front-to-back or back-to-front air flow make the DXS-3600 series suitable for top-of-rack (To R) deployment in data centers or enterprise & campus aggregation network environments. The DXS-3600 switches have 24 fixed 10 Gb E SFP+ ports & can feature more ports with the addition of an expansion module. The DXS-3600 switches deliver high-performance 10-Gigabit Ethernet switching capacity of up to 960 Gbps & forwarding rates of up to 595.2 Mbps. The switches feature hot-swappable power supplies & fan trays, which enable the switches to be redundant, high availability architecture. The modular power design allows users to select AC or DC power according to where the switch is deployed. When inserting two power modules, the two power modules share the loading & help to extend the lifetime of the other. The DXS-3600 series also features a modular fan design. Three fans can back up each other, providing N+1 redundancy for the system. If one of the fans fails, the other fans will increase their speed by automatically detecting the system temperature. Both power & fan modules are hot-swappable, which minimizes the downtime of the DXS-3600 series. ...

D-Link's DXS-3600 Series Top-of-Rack 10 Gigabit Stackable Managed Switch consists of compact, high-performance switches that feature 10 Gigabit Ethernet switching, routing, & very low latency. ...

D-Link Insight is a unique, cloud-based network management framework for the D-Link line of web smart switch that monitors client computer access to network resources based on identity & compliance with corporate policy. Insight-enabled switches bring enterprise level functionality to smaller environments. Leveraging Microsoft Network Access Protection (NAP) technology, Insight gives administrators visibility into & control over their networks like never before without complex security servers. ...

This switch provides 24 10/100 Mbps ports to connect to 24 workstations & servers. All ports auto-sense the network speed of the computers & hubs to run at either 10 Mbps or 100 Mbps. All ports auto-negotiate between full & half duplex, flow control, & MDI/MDIX twisted-pair cross over. This switch provides an open slot for you to install 2 optional Fast Ethernet fiber ports to attach to 2 servers or cascading switches over the 2 km long reliable fiber cables. Expansion is easy through any twisted-pair port. You cascade several switches together through this port to get more ports. IEEE 802.3x Flow Control allows your servers to directly connect to this switch for fast, reliable data transfer. At 200 Mbps full duplex, this switch provides high-speed data pipes to your servers with minimum data transfer loss. Auto-negotiation of MDI/MDIX cross over eliminates the need for cross over cables or uplink ports. Any port can simply plug to a server, workstation, or hub using the usual straight through twisted-pair cable. ...

The D-Link DAP-3690 Wireless N Dualband Outdoor Po E Access Point is an ideal solution for creating hot spot networks that provide outdoor users with wireless Internet access. Its versatile functions, high power design & weather resistant features make it a great solution for manufacturing plants, industrial locations, convention halls, school campuses, airports, golf courses, marinas, & other outdoor venues. The DAP-3690 allows network administrators to deploy a highly manageable & extremely robust concurrent dual band wireless network. All four antennas are detachable & can provide optimal wireless coverage in both 2.4 G Hz (802.11g & 802.11n) & 5 G Hz (802.11a & 802.11n) bands. Ideal for outdoor deployment, this device is built with a series of weather resistant features, such as a built-in heater, to withstand all elements. For advanced installation, this new high-speed Access Point has integrated 802.3at Power over Ethernet (Po E) support, allowing installation in areas where power outlets are not readily available. The DAP-3690 can be configured to optimize network performance based on any one of its multiple operation modes: Access Point, Wireless Distribution System (WDS), WDS with Access Point (WDS+AP), & Wireless Client. Also included are advanced features such as Load Balancing, which optimizes high network traffic volume, & redundancy for fail-safe wireless connectivity. in addition, the DAP-3690 offers Spanning Tree Protocol support for greater efficiency & to avoid broadcast storms when used in WDS mode. The DAP-3690 delivers reliable wireless performance with maximum wireless signal rate of up to 300 Mbps in both the 2.4 GHz & 5 GHz wireless b&. in addition, support for Wi-Fi Multimedia (WMM) Quality of Service (Qo S) features make this device an ideal access point for audio, video, & voice applications. When enabled, Qo S allows the DAP-3690 to automatically priorities traffic according to the level of interactive streami ...

The D-Link DAP-3690 Wireless N Dualband Outdoor Po E Access Point is an ideal solution for creating hot spot networks that provide outdoor users with wireless Internet access. Its versatile functions, high power design & weather resistant features make it a great solution for manufacturing plants, industrial locations, convention halls, school campuses, airports, golf courses, marinas, & other outdoor venues. The DAP-3690 allows network administrators to deploy a highly manageable & extremely robust concurrent dual band wireless network. All four antennas are detachable & can provide optimal wireless coverage in both 2.4 G Hz (802.11g & 802.11n) & 5 G Hz (802.11a & 802.11n) bands. Ideal for outdoor deployment, this device is built with a series of weather resistant features, such as a built-in heater, to withstand all elements. For advanced installation, this new high-speed Access Point has integrated 802.3at Power over Ethernet (Po E) support, allowing installation in areas where power outlets are not readily available. The DAP-3690 can be configured to optimize network performance based on any one of its multiple operation modes: Access Point, Wireless Distribution System (WDS), WDS with Access Point (WDS+AP), & Wireless Client. Also included are advanced features such as Load Balancing, which optimizes high network traffic volume, & redundancy for fail-safe wireless connectivity. in addition, the DAP-3690 offers Spanning Tree Protocol support for greater efficiency & to avoid broadcast storms when used in WDS mode. The DAP-3690 delivers reliable wireless performance with maximum wireless signal rate of up to 300 Mbps in both the 2.4 GHz & 5 GHz wireless b&. in addition, support for Wi-Fi Multimedia (WMM) Quality of Service (Qo S) features make this device an ideal access point for audio, video, & voice applications. When enabled, Qo S allows the DAP-3690 to automatically priorities traffic according to the level of interactive streami ...

The DAP-3320 Wireless Po E Outdoor Access point is the ideal solution for expanding the coverage & signal strength of any wireless network. Built to withstand outdoor environments, the DAP-3320 also excels in connecting separate networks that cannot be joined using physical wiring. ...

D-View 6.0 SNMP Network Management System (Standard edition) is a comprehensive standards-based management tool designed to centrally manage critical network characteristics such as availability, reliability, resilience & security in a consistent way. Flexible & versatile, this software accommodates a wide range of D-Link & third-party devices. D-View 6.0 is organized into a vendor-independent platform & user plug-in modules. The platform consists of several main components, which can be loaded or unloaded according to the users needs. Plug-in modules exist for the D-Link devices that the administrators want to manage. When a device is selected for management, D-View 6.0 will look for that devices plug-in module & display its image on the screen. Users can create a topology map to graphically represent an existing or planned network. Users can further customize their diagrams with selected icons & bitmap files used for the background. When a topology map is opened, D-View 6.0 will discover the devices connected on the network & display their icons on the map. Then D-View 6.0 periodically polls network devices to monitor their status, via the SNMP & ICMP protocols. D-View 6.0 can recognize SNMP-enabled devices & also distinguish the devices type. For remote network devices, D-View 6.0 acts as a trap receiver, collecting traps sent by the devices & notifying network administrators immediately. For those non-D-Link devices that do not have plug-in modules, D-View 6.0 offers a MIB compiler to integrate third-party MIB files into the system. After compilation, D-View 6.0 loads them into the database. The compiler can communicate with these devices, enabling the administrator to get the values currently stored in the devices or to set new values for specific MIB objects. All MIBs are converted into a graphic tree view, accessible by the administrator to manage the devices. As non-D-Link devices do not have plug-in modules for installatio ...