The DGS-3120 x Stack Series are enhanced L2 access stackable switches designed to connect end-users in a secure SMB or enterprise network. These switches support physical stacking, multicast & enhanced security, making them an ideal Gigabit access layer solution. They are equipped with an SD Card slot, allowing the user to boot images & upload configuration files directly from an SD Card. The DGS-3120 Series is embedded with two different software images
- Standard Image (SI) & Enhanced Image (EI). The Standard Image provides sophisticated features for small & medium businesses, including advanced Quality of Service (Qo S), traffic shaping, L2 multicasting, & robust security features. The Enhanced Image supports ERPS, Double VLAN (Q-in-Q), Ethernet OAM, Static Route, IMPB, s Flow, IPv 6 features which are suitable for the next generation IPv 6 networks or triple play applications in Metro Ethernet. The DGS-3120 Series targets small & medium businesses that require a high level of network security & maximum uptime. All the models in DGS-3120 Series support an external redundant power supply so that continued operation can be assured. They also include other features, such as Spanning Tree, Rapid Spanning Tree & Multiple Spanning Tree, Loopback Detection, & Broadcast Storm Control, which enhance network resilience. The Ethernet Ring Protection Switching (ERPS) function minimizes the recovery time in case of a loop failure. For load sharing & redundancy backup in switch cascading/server attachment configuration, the DGS-3120 Series provides dynamic port trunking. The DGS-3120 Series provides users with the latest security features such as Multi-layer & Packet Content Access Control Lists (ACL), Storm Control, & IP-MAC-Port Binding (IMPB) with DHCP Snooping. The IP-MAC-Port Binding feature allows administrators to bind a source IP address with an associated MAC & also define the port number to enhance user access control. With the DHCP Snoo
...

The DGS-3120 x Stack Series switches are enhanced L2 access stackable switches designed to connect end-users in a secure SMB or enterprise network. These switches support physical stacking, multicast, & enhanced security, making them an ideal Gigabit access layer solution. ...

The DGS-3120 x Stack Series are enhanced L2 access stackable switches designed to connect end-users in a secure SMB or enterprise network. These switches support physical stacking, multicast & enhanced security, making them an ideal Gigabit access layer solution. They are equipped with an SD Card slot, allowing the user to boot images & upload configuration files directly from an SD Card. The DGS-3120 Series is embedded with two different software images
- Standard Image (SI) & Enhanced Image (EI). The Standard Image provides sophisticated features for small & medium businesses, including advanced Quality of Service (Qo S), traffic shaping, L2 multicasting, & robust security features. The Enhanced Image supports ERPS, Double VLAN (Q-in-Q), Ethernet OAM, Static Route, IMPB, s Flow, IPv 6 features which are suitable for the next generation IPv 6 networks or triple play applications in Metro Ethernet. The DGS-3120 Series targets small & medium businesses that require a high level of network security & maximum uptime. All the models in DGS-3120 Series support an external redundant power supply so that continued operation can be assured. They also include other features, such as Spanning Tree, Rapid Spanning Tree & Multiple Spanning Tree, Loopback Detection, & Broadcast Storm Control, which enhance network resilience. The Ethernet Ring Protection Switching (ERPS) function minimizes the recovery time in case of a loop failure. For load sharing & redundancy backup in switch cascading/server attachment configuration, the DGS-3120 Series provides dynamic port trunking. The DGS-3120 Series provides users with the latest security features such as Multi-layer & Packet Content Access Control Lists (ACL), Storm Control, & IP-MAC-Port Binding (IMPB) with DHCP Snooping. The IP-MAC-Port Binding feature allows administrators to bind a source IP address with an associated MAC & also define the port number to enhance user access control. With the DHCP Snoo
...

The DGS-3120 x Stack Series are enhanced L2 access stackable switches designed to connect end-users in a secure SMB or enterprise network. These switches support physical stacking, multicast & enhanced security, making them an ideal Gigabit access layer solution. They are equipped with an SD Card slot, allowing the user to boot images & upload configuration files directly from an SD Card. The DGS-3120 Series is embedded with two different software images
- Standard Image (SI) & Enhanced Image (EI). The Standard Image provides sophisticated features for small & medium businesses, including advanced Quality of Service (Qo S), traffic shaping, L2 multicasting, & robust security features. The Enhanced Image supports ERPS, Double VLAN (Q-in-Q), Ethernet OAM, Static Route, IMPB, s Flow, IPv 6 features which are suitable for the next generation IPv 6 networks or triple play applications in Metro Ethernet. The DGS-3120 Series targets small & medium businesses that require a high level of network security & maximum uptime. All the models in DGS-3120 Series support an external redundant power supply so that continued operation can be assured. They also include other features, such as Spanning Tree, Rapid Spanning Tree & Multiple Spanning Tree, Loopback Detection, & Broadcast Storm Control, which enhance network resilience. The Ethernet Ring Protection Switching (ERPS) function minimizes the recovery time in case of a loop failure. For load sharing & redundancy backup in switch cascading/server attachment configuration, the DGS-3120 Series provides dynamic port trunking. The DGS-3120 Series provides users with the latest security features such as Multi-layer & Packet Content Access Control Lists (ACL), Storm Control, & IP-MAC-Port Binding (IMPB) with DHCP Snooping. The IP-MAC-Port Binding feature allows administrators to bind a source IP address with an associated MAC & also define the port number to enhance user access control. With the DHCP Snoo
...

The DGS-3120 x Stack Series switches are enhanced L2 access stackable switches designed to connect end-users in a secure SMB or enterprise network. These switches support physical stacking, multicast, & enhanced security, making them an ideal Gigabit access layer solution. ...

The DGS-1210-48 is part of D-Link's 3rd generation of Web Smart Switches that integrates advanced management & security functions for performance & scalability. With D-link Green technology now in its second generation, the DGS-1210-48 provides a complete, affordable & eco-friendly solution for small & medium businesses (SMB). ...

The DGS-3620 Series of next generation Layer 3 Gigabit switches deliver performance, flexibility, security, multi-layer Qo S & access control, along with redundant power solutions for SMBs & enterprises. With high Gigabit port densities, Gigabit SFP & 10-Gigabit SFP+ support, & advanced software solutions, these switches can act as either departmental access layer devices or core switches to form a multilevel network structured with backbone & centralized high-speed servers. Service providers can take advantage of the high SFP density switches to structure the cores of Fibre to the Building (FTTB) networks that they extend to the subscriber's sites. The DGS-3620 Series is embedded with two different software images, the Standard Image (SI) & the Enhanced Image (EI). The Standard Image provides fundamental features for campuses & enterprises such as switching, routing, multicasting, advanced Quality of Service (Qo S), & robust security features. The Enhanced Image supports OAM, BGP, IPv 6 dynamic routing & tunneling, which are all suitable for the service provider network. Easily deployed & simple to manage, the DGS-3620 can be virtually stacked with any switch that supports D-Link's Single IP Management (SIM) to form a multi-level network structured with backbone & centralized high-speed servers. The virtual stack can include units located anywhere on the same network domain, eliminating cable distance barriers, limitations of physical stacking, & the need for stack cabling. Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Switches in the stack are hot-swappable to minimize network downtime in case a replacement is required, eliminating single points of failure. Up to 12 units or 576 Gigabit ports can be configured for a stack using direct attached cables allowing high bandwidth & high port densities on the already cost ...

The x Stack DGS-3600 series of next generation Layer 3 Gigabit switches delivers performance, flexibility, security, multi-layer Qo S & access, & redundant power option for SMB & enterprises. With high Gigabit port densities, SFP support, 10-Gigabit uplink options & advanced software functions, these switches can act as departmental access layer devices or core switches to form a multi-level network structured with high-speed backbone & centralized servers. Telecom service providers can also take advantage of the high SFP density switches to form the core of their Fiber to the building (FTTB) network that extends to the subscribers sites. Easy to deploy & simple to managed, the DGS-3600 series can be stacked with any switches supporting D-Links Single IP Management to form a multi-level network structured with backbone & centralized high-speed servers. This virtual stack can comprise units located anywhere on the same network domain, & uses the optional 10- Gigabit uplinks to move intra-stack traffic at 20 Gbps full duplex. It can eliminate single points of failures, cable distance barriers, physical stacking method limitations & the need for stacking cabling. The DGS-3600 series provides a complete set of security features, which

Includes:: L2/L3/L4 multi-layer Access Control Lists & 802.1x user authentication via TACACS+ & RADIUS servers. In addition, it offers suppression capabilities & Layer 3 IP v 4/v 6 Static Routing to increase network performance & security. Built-in D-Link Zone Defense technology allows business to integrate the switch stack with D-Link Net Defend firewalls to implement a full coverage, proactive security architecture. The DGS-3600 series offers extensive VLAN support including GARP/GVRP & 802.1Q VLAN to enhance security & performance. To support converged applications including Vo IP, ERP, Intranet & video conference, a robust set of L2/L3/L4 QOS/ Co S features ensures that critical network services are serve

...

The DES-3052P is part of D-Links family of premium devices in the entry-level network management category. With Power over Ethernet (Po E) support, 4 Gigabit uplinks, comprehensive network security, granular bandwidth control & extensive network management, this switch is rich in functions allowing organisations set up secure & effective departmental networks at an affordable cost. The DES-3052P provides 48 Ethernet ports & is equipped with 4 Gigabit uplinks, with the SFP supporting both fibre Gigabit & 100 Base-FX fibre connection for specific applications. 802.3af Po E is integrated into every switch port. Hence any 802.3af compliant device can be powered by the switch via the standard Ethernet cables, to a maximum of 15.4W per device & 370 W for the switch. The DES-3052P

Includes:: many security features including Access Control Lists (ACLs), 802.1X Port-Based/MAC-Based Access Control & 802.1X Guest VLAN so that network access is available only to authorised users. To enhance network resilience, the switch supports Spanning Tree protocols, including 802.1D, 802.1w & 802.1s for redundant bridge paths. In addition, a unique feature, D-Link Safeguard Engine, allows administrators to configure thresholds that limit the impact of packet flooding to the switchs CPU typically caused by virus/worm outbreaks. This increases the switchs reliability & availability. Network administrators can define throughput levels for each port to manage bandwidth. Fine granularity down to 64 Kbps can be achieved. For Quality of Service (Qo S), the switch supports 802.1p Priority Queues & packet classification based on To S, DSCP, MAC, IP, VLAN ID & protocol type, to ensure that critical network services like Vo IP, ERP, Intranet & video conference are prioritised. The switch also provides IGMP snooping to control multicast transmission & port mirroring to facilitate diagnostics. In addition, 802.3ad Link Aggregation allows high-speed links to be created bet

...

The DES-3052P is part of D-Link's family of premium devices in the entry-level network management category. With Power over Ethernet (Po E) support, 4 Gigabit uplinks, comprehensive network security, granular bandwidth control & extensive network management, this switch is rich in functions allowing organisations set up secure & effective departmental networks at an affordable cost. The DES-3052P provides 48 Ethernet ports & is equipped with 4 Gigabit uplinks, with the SFP supporting both fibre Gigabit & 100 Base-FX fibre connection for specific applications. 802.3af Po E is integrated into every switch port. Hence any 802.3af compliant device can be powered by the switch via the standard Ethernet cables, to a maximum of 15.4W per device & 370 W for the switch. The DES-3052P

Includes:: many security features including Access Control Lists (ACLs), 802.1X Port-Based/MAC-Based Access Control & 802.1X Guest VLAN so that network access is available only to authorised users. To enhance network resilience, the switch supports Spanning Tree protocols, including 802.1D, 802.1w & 802.1s for redundant bridge paths. In addition, a unique feature, D-Link Safeguard Engine, allows administrators to configure thresholds that limit the impact of packet flooding to the switch's CPU typically caused by virus/worm outbreaks. This increases the switch's reliability & availability. Network administrators can define throughput levels for each port to manage bandwidth. Fine granularity down to 64 Kbps can be achieved. For Quality of Service (Qo S), the switch supports 802.1p Priority Queues & packet classification based on To S, DSCP, MAC, IP, VLAN ID & protocol type, to ensure that critical network services like Vo IP, ERP, Intranet & video conference are prioritised. The switch also provides IGMP snooping to control multicast transmission & port mirroring to facilitate diagnostics. In addition, 802.3ad Link Aggregation allows high-speed links to be created bet

...