More From Contributor

£200.59
The DGS-3000-10TC is part of the Layer 2 family of D-Link's managed switch product line that provides wired Gigabit speed access for metro & campus networks. The DGS-3000-10TC is designed as a 1U rackmount case suitable for enterprise access or service provider telecom cabinets, maximizing network performance without compromising on reliability & security. Green technology decreases energy costs by reducing power consumption, without compromising on performance. All of the Ethernet ports of the DGS-3000-10TC support 6k V surge/lightning protection. This feature protects the switch from power surges due to lightning or improper electrical wiring when the Ethernet cables are exposed in open spaces, such as in old buildings. For Ethernet link fail-over, the DGS-3000-10TC supports 802.1D Spanning Tree Protocol (STP), 802.1w Rapid Spanning Tree Protocol (RSTP), & 802.1s Multiple Spanning Tree Protocol (MSTP), to allow automatic backup of bridge paths. Using these features, the transmission & reception of frames can be guaranteed even during a network failure. For mission critical environments, the switches also support ITU-I G.8032 Ethernet Ring Protection Switching (ERPS); traffic can be rerouted around the ring within 50 milliseconds, minimizing disruption to service. D-Link Loopback Detection (LBD) is a protocol-less loop detection function that prevent loop events from causing congestion in uncontrolled network segments such as unmanaged switches or customer networks. The DGS-3000-10TC also support 802.1AX & 802.3ad Link Aggregation, which allows grouping of multiple ports in parallel to increase bandwidth & redundancy for high availability & load sharing in a multi-client environment. Virtual Stacking reduces the number of IP addresses needed on a network by configuring up to 32 devices to appear as a single unit with one IP address. This simplifies network management for small workgroups & allows for switches to be added without special cabling ...
Available
£254.13
The DGS-3000-10TC is part of the Layer 2 family of D-Link's managed switch product line that provides wired Gigabit speed access for metro & campus networks. The DGS-3000-10TC is designed as a 1U rackmount case suitable for enterprise access or service provider telecom cabinets, maximizing network performance without compromising on reliability & security. Green technology decreases energy costs by reducing power consumption, without compromising on performance. ...
Available
£2028.93
Several DGS-3627 switches may be physically stacked, using low-cost CX4 10 Gigabit copper modules. In this configuration, one or two 10-Gigabit uplinks may be created, depending on whether the linear or fault-tolerant ring stacking 1 is implemented. Up to 12 switches can be stacked in this way. Using the low-cost coaxial cable as the medium to stack switches together provides not only high-bandwidth stacking but also the flexibility to add 10-Gigabit uplinks strictly as needed. The three open slots can also be used for optional 10-Gigabit XFP fiber uplinks to servers or a backbone connection. With D-Link Single IP Management (SIM) support, you can easily add up to 32 switch units -regardless of the model- in a virtual stack in addition to your physical stack. Multiple switches can be configured, monitored & maintained from any workstation running a Web browser via one single IP address. The stack is managed as a single object, as all stacked units are identified by a single IP address. A simple yet powerful web-based interface means that you can perform most management & configuration tasks. A complete set of security features is provided, which

Includes::
L2/L3/L4 multi-layer Access Control Lists (ACLs) & 802.1X user authentication via TACACS+ & RADIUS servers. The switch also offers suppression capabilities & Layer 3 IPv 4/v 6 static routing to increase network performance & security. In addition, when implemented in conjunction with a D-Link Net Defend firewall, this switch as a st&-alone or in a stack, is able to automatically quarantine any host displaying abnormal behaviour. Finally, D-Links Zone Defense, provides proactive network security by preventing viruses from spreading through the network & thwarting harmful network attacks. The DGS-3627 switch provides VLAN support including GARP/GVRP & 802.1Q to enhance network security & performance. The switch implements a robust set of multi-layer (L2, L3, L4) Qo S/ Co S features to ensure that cr

...
Archived Product
£393.76
D-Link's DGS-1100 Series provide an affordable solution for SOHOs & Small & Medium Businesses as well as enterprise deployment, such as in branch offices & meeting rooms that require simple network management. Most models comes in a compact desktop-sized metal case & features a wide selection of Gigabit port configurations with optional Gigabit fiber uplink ports. There are 4 switches in the series supporting Power-over-Ethernet with 2 of the switches in the offering high-power-budget Po E for businesses looking to power Vo IP phones, wireless access points or network cameras. ...
Available
£467.13
The DGS-1510 series is the next generation of Smart Pro switch. It contains 16, 24 or 48 10/100/1000 Mbps ports plus 2 Gigabit SFP ports & 2 10G SFP+ ports, as well as one 24 10/100/1000 Mbps Po E plus 2 Gigabit SFP ports & 2 10G ports Smart Pro switch. With its 10G SFP+ ports, the DGS-1510 series is ideal for deployments in the SME/SMB core with its 10G uplinks connecting with servers equipped with 10G port connectivity. For medium to large scale enterprise deployment, it can serve as a good interconnection between the core switch & edge switch. The DGS-1510 Series Gigabit Stackable Smart Pro Switches with 10G Uplinks

Includes::
a Po E-enable switch for businesses looking to power Vo IP phones, wireless access points or network cameras. The DGS-1510-28P is a 24-port Po E Switch that provides 24 Po E-enabled ports that can support up to 30 W of power output following the IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs. Featuring D-Link Green 3.0 technology, the DGS-1510 series offers a high level of energy saving & efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv 6 management & configurations ensures your network remains protected after the upgrade from IPv 4 to IPv 6. By offering multiple management options, the DGS-1510 Series allows quick deployment, infrastructure expansion, & seamless function upgrades. Built for small & medium-sized businesses, the DGS-1510 Series provide functionality, security, & manageability for a fraction of the standard cost of ownership. Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. 6 units or 288 Gigabit ports can be configured for a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix any models

...
Available
£512.85
The DGS-1510 series is the next generation of smart managed switch. It contains 16, 24 or 48 10/100/1000 Mbps ports plus 2 Gigabit SFP ports & 2 10G SFP+ ports, 24/48 10/100/1000 Mbps ports plus 4 10G SFP+ ports, as well as one 24 10/100/1000 Mbps Po E plus 2 Gigabit SFP ports & 2 10G ports smart managed switch. With it's 10G SFP+ ports, the DGS-1510 series is ideal for deployments in the SME/SMB core with its 10G uplinks connecting with servers equipped with 10G port connectivity. For medium to large scale enterprise deployment, it can serve as a good interconnection between the core switch & edge switch. ...
Available
£255.85
D-Link Insight is a unique, cloud-based network management framework for the D-Link line of web smart switch that monitors client computer access to network resources based on identity & compliance with corporate policy. Insight-enabled switches bring enterprise level functionality to smaller environments. Leveraging Microsoft Network Access Protection (NAP) technology, Insight gives administrators visibility into & control over their networks like never before without complex security servers. ...
Available
£257.53
D-Link Insight is a unique, cloud-based network management framework for the D-Link line of web smart switch that monitors client computer access to network resources based on identity & compliance with corporate policy. Insight-enabled switches bring enterprise level functionality to smaller environments. Leveraging Microsoft Network Access Protection (NAP) technology, Insight gives administrators visibility into & control over their networks like never before without complex security servers. ...
Available
£219.81
The DGS-1510 series is the next generation of Smart Pro switch. It contains 16, 24 or 48 10/100/1000 Mbps ports plus 2 Gigabit SFP ports & 2 10G SFP+ ports, as well as one 24 10/100/1000 Mbps Po E plus 2 Gigabit SFP ports & 2 10G ports Smart Pro switch. With its 10G SFP+ ports, the DGS-1510 series is ideal for deployments in the SME/SMB core with its 10G uplinks connecting with servers equipped with 10G port connectivity. For medium to large scale enterprise deployment, it can serve as a good interconnection between the core switch & edge switch. The DGS-1510 Series Gigabit Stackable Smart Pro Switches with 10G Uplinks

Includes::
a Po E-enable switch for businesses looking to power Vo IP phones, wireless access points or network cameras. The DGS-1510-28P is a 24-port Po E Switch that provides 24 Po E-enabled ports that can support up to 30 W of power output following the IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs. Featuring D-Link Green 3.0 technology, the DGS-1510 series offers a high level of energy saving & efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv 6 management & configurations ensures your network remains protected after the upgrade from IPv 4 to IPv 6. By offering multiple management options, the DGS-1510 Series allows quick deployment, infrastructure expansion, & seamless function upgrades. Built for small & medium-sized businesses, the DGS-1510 Series provide functionality, security, & manageability for a fraction of the standard cost of ownership. Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. 6 units or 288 Gigabit ports can be configured for a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix any models

...
Available
£221.53
The DGS-1510 series is the next generation of Smart Pro switch. It contains 16, 24 or 48 10/100/1000 Mbps ports plus 2 Gigabit SFP ports & 2 10G SFP+ ports, as well as one 24 10/100/1000 Mbps Po E plus 2 Gigabit SFP ports & 2 10G ports Smart Pro switch. With its 10G SFP+ ports, the DGS-1510 series is ideal for deployments in the SME/SMB core with its 10G uplinks connecting with servers equipped with 10G port connectivity. For medium to large scale enterprise deployment, it can serve as a good interconnection between the core switch & edge switch. The DGS-1510 Series Gigabit Stackable Smart Pro Switches with 10G Uplinks

Includes::
a Po E-enable switch for businesses looking to power Vo IP phones, wireless access points or network cameras. The DGS-1510-28P is a 24-port Po E Switch that provides 24 Po E-enabled ports that can support up to 30 W of power output following the IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs. Featuring D-Link Green 3.0 technology, the DGS-1510 series offers a high level of energy saving & efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv 6 management & configurations ensures your network remains protected after the upgrade from IPv 4 to IPv 6. By offering multiple management options, the DGS-1510 Series allows quick deployment, infrastructure expansion, & seamless function upgrades. Built for small & medium-sized businesses, the DGS-1510 Series provide functionality, security, & manageability for a fraction of the standard cost of ownership. Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. 6 units or 288 Gigabit ports can be configured for a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix any models

...
Available

D-Link 28-Port Gigabit PoE SmartPro Stackable Switch

The DGS-1510 series is the next generation of SmartPro switch. It contains 16, 24 or 48 10/100/1000 Mbps ports plus 2 Gigabit SFP ports and 2 10G SFP+ ports, as well as one 24 10/100/1000 Mbps PoE plus 2 Gigabit SFP ports and 2 10G ports SmartPro switch. With its 10G SFP+ ports, the DGS-1510 series is ideal for deployments in the SME/SMB core with its 10G uplinks connecting with servers equipped with 10G port connectivity. For medium to large scale enterprise deployment, it can serve as a good interconnection between the core switch and edge switch. The DGS-1510 Series Gigabit Stackable SmartPro Switches with 10G Uplinks includes a PoE-enable switch for businesses looking to power VoIP phones, wireless access points or network cameras. The DGS-1510-28P is a 24-port PoE Switch that
provides 24 PoE-enabled ports that can support up to 30 W of power output following the IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs. Featuring D-Link Green 3.0 technology, the DGS-1510 series offers a high level of energy saving and efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv6 management and configurations ensures your network remains protected after the upgrade from IPv4 to IPv6. By offering multiple management options, the DGS-1510 Series allows quick deployment, infrastructure expansion, and seamless function upgrades. Built for small and medium-sized businesses, the DGS-1510 Series provide functionality, security,
and manageability for a fraction of the standard cost of ownership. Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. 6 units or 288 Gigabit ports can be configured for a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix any models
Availability: In Stock
£440.98

Product Description

The DGS-1510 series is the next generation of Smart Pro switch. It contains 16, 24 or 48 10/100/1000 Mbps ports plus 2 Gigabit SFP ports & 2 10G SFP+ ports, as well as one 24 10/100/1000 Mbps Po E plus 2 Gigabit SFP ports & 2 10G ports Smart Pro switch. With its 10G SFP+ ports, the DGS-1510 series is ideal for deployments in the SME/SMB core with its 10G uplinks connecting with servers equipped with 10G port connectivity. For medium to large scale enterprise deployment, it can serve as a good interconnection between the core switch & edge switch. The DGS-1510 Series Gigabit Stackable Smart Pro Switches with 10G Uplinks

Includes::
a Po E-enable switch for businesses looking to power Vo IP phones, wireless access points or network cameras. The DGS-1510-28P is a 24-port Po E Switch that provides 24 Po E-enabled ports that can support up to 30 W of power output following the IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs. Featuring D-Link Green 3.0 technology, the DGS-1510 series offers a high level of energy saving & efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv 6 management & configurations ensures your network remains protected after the upgrade from IPv 4 to IPv 6. By offering multiple management options, the DGS-1510 Series allows quick deployment, infrastructure expansion, & seamless function upgrades. Built for small & medium-sized businesses, the DGS-1510 Series provide functionality, security, & manageability for a fraction of the standard cost of ownership. Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. 6 units or 288 Gigabit ports can be configured for a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix any models

Reviews/Comments

Add New

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Energy Efficient - A term used to describe an electrical item which makes the good use of energy
Physical - Used to describe strength or visual properties of an item
edge - Enhanced data rates for GSM evolution also known as enhanced GPRS. A mobile phone technology with improved data transmission rates.
edge - The point at which two surfaces meet
Quick - Something that is fast
Network - A link and communication between things. Often computers or people.
Large - something that takes up more space than normal.
Small - something that takes up less space than normal.
Affordable - Something that is within a set price range that can be afforded due to its reasonable price.
Design - A drawing or styles that shows the look and functionality of something before its made.
Wireless - A wire free device that uses radio and microwaves to send signals.
Ideal - Something that satisfies a perfect criteria.

Supplier Information

Page Updated: 2022-10-13 15:56:15

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu