D-Link is an industry pioneer, market leader, designer & true manufacturer of networking communications & digital home electronic products. Excellence in manufacturing, innovation & a commitment to quality has allowed D-Link to produce cutting-edge, high-performance products within standard-based technologies. The company continues to offer the best value in the connectivity market today by combining high-quality products with the most affordable price point. ...

The D-Link DWS-4026 is a unified switch that provides centralized management of a wireless network infrastructure in business environments. Every port features Power over Ethernet (Po E) & Gigabit connectivity that support the high-speed wireless standard, 802.11n. All aspects of the wireless LAN may be centrally controlled, including SSIDs, VLAN & encryption keys. In addition, the switch can adjust the output power on each AP & perform dynamic channel allocation & load balancing between APs. Fast roaming is supported, not only between physical Access Points, but also between logical IP subnets. The switch also

Includes:: full Layer 2+ management features for use in mixed wired/wireless environments.

...

The D-Link DWS-4026 is a unified switch that provides centralized management of a wireless network infrastructure in business environments. Every port features Power over Ethernet (Po E) & Gigabit connectivity that support the high-speed wireless standard, 802.11n. All aspects of the wireless LAN may be centrally controlled, including SSIDs, VLAN & encryption keys. In addition, the switch can adjust the output power on each AP & perform dynamic channel allocation & load balancing between APs. Fast roaming is supported, not only between physical Access Points, but also between logical IP subnets. The switch also

Includes:: full Layer 2+ management features for use in mixed wired/wireless environments.

...

The DWS-4026 is D-Link's next generation Unified Wired/ Wireless Gigabit Switch with an array of advanced features & 802.11n support. With the ability to manage up to 64 unified wireless access points by itself & up to 256 unified wireless access points in a switch cluster, the DWS-4026 is a full-featured & cost-effective mobility solution for mid-to large enterprises & service providers ...

The D-Link DGS-1026MP 26-Port Gigabit Max Po E Switch enables users to easily connect & power Po E-capable devices such as wireless access points (APs), IP cameras, & IP phones. Each of the 24 Po E ports can supply up to 30 W, with a total Po E budget of 370 W. ...

The DGS-1210 series Smart switch features D-Link Green 3.0 technology. The series offers a high level of energy saving & efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv 6 management & configurations ensures your network remains protected after the upgrade from IPv 4 to IPv 6. By offering multiple management options, the Smart switch allows quick deployment, infrastructure expansion, & seamless function upgrades. Built for small & medium-sized businesses, the DGS-1210 series Smart switch provides functionality, security, & manageability for a fraction of the standard cost of ownership. The DGS-1210-24P is a 24-port Smart Po E switch that provides 12 Po E-enabled ports that can support up to 30 W of power output following IEEE 802.3at standard. ...

The DGS-1210 Series Gigabit Smart Managed Switches with Fibre Uplinks is the latest generation of D-Link Smart Managed Switches featuring high port density & optional Po E support. With D-Link Green 3.0 technology, the series offers a high level of energy saving & efficiency, as well as compliance with IEEE 802.3az Energy Efficient Ethernet standard. The D-Link DGS-1210 Series Smart Managed Switches are the latest generation of switches to provide increased Power over Ethernet (Po E) output, a range of physical interface types, multiple management interfaces & advanced Layer 2 features. Support for IPv 6 management & configurations ensures your network remains protected after the upgrade from IPv 4 to IPv 6. By offering multiple management options, the Gigabit Smart Managed Switches allows quick deployment, infrastructure expansion, & seamless function upgrades. Built for small & medium-sized businesses, the DGS-1210 Series provide functionality, security, & manageability for a fraction of the standard cost of ownership. The DGS-1210 Series Gigabit Smart Managed Switches

Includes:: a range of affordable Po E-enable switches for businesses looking to power Vo IP phones, wireless access points or network cameras. The DGS-1210-08P is a 8-port Smart Managed Po E Switch that provides 8 Po E-enabled ports that can supply power of up to 30 W each. Whereas the DGS-1210-24P is a 24-port Smart Managed Po E Switch that provides 24 Po E-enabled ports that can support up to 30 W of power output following IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs. ** Easy Management** The DGS-1210 Series is designed for easy management. All configurations can be made through a Web interface regardless of the host PC’s operating system. Furthermore, the web UI contains ten language options to make operations more straightforward. During the first installation, the D-Link Netwo

...

The x Stack DGS-3426P next generation switch delivers performance, flexibility, security, multi-layer Quality of Service (Qo S) & redundant power option for the SMB & enterprises. With high Gigabit port densities for desktop connections, SFP fibre connectivity, 10-Gigabit uplink options & enhanced Layer 2+ functions, this switch comprises the workgroup access-layer stack for seamless integration with L3 core switches to form part of a multilevel network structured with high-speed backbone & centralized servers. The DGS-3426P can operate as a st&-alone device or part of a scalable stack. Embedded with Single IP Management capability, a st&-alone switch can form part of a virtual stack, where intra-stack traffic flows through the usual network wires, doing away with the costly stacking cables. Without stacking cables, cable distance barriers & physical stacking limitations, a virtual stack can comprise units that are located anywhere on the network that minimizes the impact of any single point of failure. Alternatively, optional 10-Gigabit modules can be installed in the open slots to create a physical stack. Up to 12 units or 288 Gigabit ports can be configured for a stack. Users can install one or two single-port modules, depending on whether the fault-tolerant Ring or Star stacking is implemented. With each of these ports providing 20 Gbps full duplex transmission on the cost-effective CX4 cable, the DGS-3426P provides not only high-bandwidth stacking but also cost control capability that allows users to add ports strictly on a per need basis. Modules with single 10-Gigabit XFP can also be installed in any of the open slots for uplink to a server or a fibre backbone. The DGS-3426P provides up to 15.4W power on all 10/100/1000 Mbps ports. It complies with the IEEE 802.3af standard, delivering power over cat 5 Ethernet cable for Po E-capable wireless APs, IP cameras & IP phones. The DGS-3426P provides a complete set of security features, which ...

This D-link DGS-1210-28P is part of D-Link's 3rd generation of Web Smart Switches that integrates advanced management & security functions for performance & scalability. With D-link Green technology now in its second generation, this D-Link DGS-1210-28P provides a complete, affordable & eco-friendly solution for small & medium businesses (SMB). ** Power over Ethernet (Po E) support** This D-Link DGS-1210-28P features 24 Po E ports. They provide either up to 30W on 4 ports, 15.4W on 12 ports or 7.5W on 24 ports. This gives administrators the flexibility to connect 802.3af compliant devices such as network cameras & IP phones, as well as 802.3at pre-standard equipment such as 802.11n Access Points. Uniquely, the Po E function is programmable, so power can be cut at certain times to save energy. ** Seamless Integration** This D-Link DGS-1210-28P

Includes:: 24 10/100/1000 Mbps ports capable of connecting to existing Cat.5 twisted-pair cables & the last four ports of this D-Link DGS-1210-28P combine SFP & copper connectivity into one port to provide a flexible solution for server connections via fiber interface. Using the default presets, the administrator can quickly set up the switch without worrying about reconfiguring any settings & providing easy access for the user. ** Extensive Layer 2 Features** Equipped with a complete lineup of L2 features, these switches include IGMP Snooping, Port Mirroring, Spanning Tree & Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to this D-Link DGS-1210-28P switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port & automatically shut down the affected port. Cable Diagnostics is desig

...

Computers do not require Internet access all the time; neither do switches utilize all ports at all times. When a computer or network equipment is shutdown, switches often remain on & continue to consume considerable amount of power. With Green Ethernet technology, D-Link switches can automatically detect link status & reduce power usage of ports that are idle. Computers or any connecting parties set to standby mode (not power off), however, will not provide significant power savings. The Green Ethernet switches have the ability to analyze the length of any Ethernet cable connected to them for adjustment of power usage accordingly. Shorter lengths require less power. For a traditional switch, power consumption remains constant even when the ports are not in use. In a standard workday scenario where PCs are used for 10 hours a day & powered off 14 hours a day, & connected to the switch using 20 meter cables, D-Links Green Ethernet can save up to 25% power used for each system. Get the blazing speed of Gigabit Ethernet with the D-Link Giga Express DGS-1024D, a 24-port 10/100/1000 Mbps Gigabit Switch that delivers power, performance, & reliability in one cost-effective, space-saving design. Increase the speed of your network server & backbone connections, or make Gigabit to the desktop a reality. Power users in the office, workgroup, or creative production environment can now move large, bandwidth-intensive files faster. Transfer graphics, CGI, CAD, or multimedia files across the network instantly. The versatile & compact 1RU height design of the DGS-1024D enables the device to be rackmounted in a standard 19 inch rack, while conserving valuable rack space. It features a non-blocking switching architecture that filters & forwards packets at full wire-speed for maximum throughput. An 8K MAC address table provides scalability for even the largest networks. Address learning & aging, 802.3x Flow Control for full-duplex mode, & back pressur ...