Turn an Internal 3.5" SATA or IDE Hard Drive into an External USB/e SATA Hard Drive. This Info Safe 3.5in IDE/SATA external hard drive enclosure connects to a host computer through either USB (Universal Serial Bus) 2.0 (SATA or IDE) or e SATA (SATA only), delivering versatility & cost-effectiveness. Large capacity drives (tested with up to 4TB) can be used to greatly enhance your computer's storage/backup capabilities. This black aluminum drive enclosure features a screwless snap-in design for hard drive installation that saves your valuable time, & supports any standard 3.5in SATA or IDE hard drive
- allowing you to customize your external storage solution based on your preference of hard drive model & manufacturer. The External hard drive enclosure features a large built-in 80mm fan that provides enhanced re-distribution of heat build-up generated as a result of typical drive operation. This feature is especially important for larger capacity hard drives, & faster "spinning" drives (i.e 7200 RPM), as it can help keep drives running cooler, which can preserve data integrity & the drive's lifespan by reducing the chances of premature failures. Designed to provide a convenient & efficient operating experience, the enclosure features " One Touch Backup", which automates backup tasks, allowing you to backup files & folders at the touch of a button, based on pre-defined settings within the easy to use software utility (included).
...

This Compact Flash to IDE adapter connects to any standard 40 pin or 44 pin IDE connection on a desktop computer, allowing a Compact Flash card to be used as bootable storage in place of an IDE hard drive! A Do-it-yourself SSD solution, the CF to IDE adapter can be powered by a 4-pin floppy connector or through a 44-pin IDE port, & can be mounted to the computer rear panel using the included PCI bracket
- allowing Compact Flash, Compact Flash 2, or IBM Micro Drive media to be inserted into the CF slot. The adapter function is completely transparent to the operating system, & jumper settings are provided allowing you to designate the installed Micro Drive or CF cards to act as a Master or Slave drive.
...

This IDE to SATA Drive Adapter Kit offers a simple way to install Serial ATA hard drives using an available IDE port
- a cost-effective
...

Connect 2 SATA hard drives to an IDE motherboard or card. This IDE to SATA Drive Adapter Kit offers a simple way to install Serial ATA hard drives using an available IDE port
- a cost-effective solution for using newer SATA drives on a legacy computer or a computer with all SATA connections already in use. This dual channel bridge lets you connect two high-speed SATA drives without the cost & effort of upgrading your IDE (Parallel ATA) motherboard, while minimizing the space required for IDE cable connections
- helping to improve airflow within the case which in turn helps to optimize system performance. Plus, the IDE to SATA Drive Motherboard Adapter

Includes:: a power connector & SATA data cables, to ensure the upgrade to SATA is easy! To connect to a power source, SATA hard drives require SATA power. If your computer's power supply does not have a SATA power connection, the SATAPOWADAP 6in LP4 Male to Serial ATA Power Adapter will be required.



...

This IDE to SATA Drive Adapter Kit offers a simple way to install Serial ATA hard drives using an available IDE port
- a cost-effective
...

This 6ft IEEE 1394 Fire Wire Cable provides two Fire Wire 6-pin male connectors & is expertly designed & constructed of high quality materials & IEEE-1394 rated wire to ensure optimum performance & reliability. Capable of data transfer rates of up to 400 Mbps, Fire Wire technology provides a high speed link that saves your valuable time during large file transfers (e.g. transferring digital video files from a dv camcorder to a computer, etc.). ...

The FIRE94FM IEEE-1394 Fire Wire Adapter converts a 9-pin Fire Wire connector into a 4-pin Fire Wire connector & is capable of data transfer rates of up to 400 Mbps. While providing a high speed link that saves your valuable time during large file transfers (e.g. transferring digital video files from a DV camcorder to a computer, etc.), the 9-pin to 4-pin Fire Wire Adapter is designed & constructed for both durability & convenience. ...

The FIRE96FM Fire Wire 800 to Fire Wire 400 adapter converts a 9-pin Fire Wire connector into a 6-pin Fire Wire connector & is capable of data transfer rates of up to 400 Mbps. A convenient solution for applications requiring large file transfers, the Fire Wire adapter provides a high speed link that minimizes data transfer time (e.g. transferring digital video files from a DV camcorder to a computer, etc.). The Fire Wire 800 to Fire Wire 400 adapter (9-pin to 6-pin) is designed & constructed for both durability & convenience. ...

The FIRE96FM Fire Wire 800 to Fire Wire 400 adapter converts a 9-pin Fire Wire connector into a 6-pin Fire Wire connector & is capable of data transfer rates of up to 400 Mbps. A convenient solution for applications requiring large file transfers, the Fire Wire adapter provides a high speed link that minimizes data transfer time (e.g. transferring digital video files from a DV camcorder to a computer, etc.). The Fire Wire 800 to Fire Wire 400 adapter (9-pin to 6-pin) is designed & constructed for both durability & convenience. ...

Connect Fire Wire 400 devices to a Firewire 800-equipped computer. The FIRE96MF IEEE-1394 Fire Wire 800 to 400 Adapter features a (male) Fire Wire 800 connector on one end & a (female) Fire Wire 400 connector on the other end, providing a cost-effective solution for connecting your older Fire Wire 400 devices to your Fire Wire 800-enabled devices or Mac family of products. Supporting data transfer rates of up to 400 Mbps, the FIRE96MF is great for applications requiring large file transfers, delivering a high speed link that minimizes data transfer time (e.g. transferring digital video files from a DV camcorder to a computer, etc). ...