More From Contributor

£18.73
Turn a 2.5in SATA HDD/SSD into a complete external storage solution over USB (Universal Serial Bus) 3.0 with UASP. The S2510BMU33CB UASP-enabled USB (Universal Serial Bus) 3.0 SATA hard drive enclosure lets you connect a 2.5" SATA hard drive (HDD) or solid state drive (SSD) to your computer through an available USB (Universal Serial Bus) port. To maximize portability, the enclosure features a built-in USB (Universal Serial Bus) 3.0 cable, & requires no external power adapter ensuring minimal external accessories. The cable tucks safely & discreetly away while the device is not in operation, to prevent damage or tangles. To better utilize the full potential of your SATA III SSD/HDD the enclosure supports UASP, which allows for transfer speeds up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. The USB (Universal Serial Bus) 3.0 enclosure features a sleek design with high-quality aluminum construction & ventilation, for excellent heat dissipation. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP enabled Star Tech.com Enclosure, & a SATA III solid state drive. ...
Available
£15.58
Turn a 2.5in SATA HDD/SSD into a complete external storage solution over USB (Universal Serial Bus) 3.0 with UASP. The S2510BMU33CB UASP-enabled USB (Universal Serial Bus) 3.0 SATA hard drive enclosure lets you connect a 2.5" SATA hard drive (HDD) or solid state drive (SSD) to your computer through an available USB (Universal Serial Bus) port. To maximize portability, the enclosure features a built-in USB (Universal Serial Bus) 3.0 cable, & requires no external power adapter ensuring minimal external accessories. The cable tucks safely & discreetly away while the device is not in operation, to prevent damage or tangles. To better utilize the full potential of your SATA III SSD/HDD the enclosure supports UASP, which allows for transfer speeds up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. The USB (Universal Serial Bus) 3.0 enclosure features a sleek design with high-quality aluminum construction & ventilation, for excellent heat dissipation. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP enabled Star Tech.com Enclosure, & a SATA III solid state drive. ...
Available
£22.96
Turn a 2.5in SATA HDD/SSD into a complete external storage solution over USB (Universal Serial Bus) 3.0 with UASP. The S2510BMU33CB UASP-enabled USB (Universal Serial Bus) 3.0 SATA hard drive enclosure lets you connect a 2.5" SATA hard drive (HDD) or solid state drive (SSD) to your computer through an available USB (Universal Serial Bus) port. To maximize portability, the enclosure features a built-in USB (Universal Serial Bus) 3.0 cable, & requires no external power adapter ensuring minimal external accessories. The cable tucks safely & discreetly away while the device is not in operation, to prevent damage or tangles. To better utilize the full potential of your SATA III SSD/HDD the enclosure supports UASP, which allows for transfer speeds up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. The USB (Universal Serial Bus) 3.0 enclosure features a sleek design with high-quality aluminum construction & ventilation, for excellent heat dissipation. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP enabled Star Tech.com Enclosure, & a SATA III solid state drive. ...
Available
£32.23
The SAT2MSAT25 2.5in SATA to Mini SATA SSD Adapter Enclosure turns an m SATA (Mini SATA) mini-SSD into a standard 2.5in SATA SSD for use anywhere a 2.5in SATA drive can be used. Featuring all of the standard mounting points that a normal 2.5in hard drive uses, the converter can be installed into External Hard Drive Enclosures, Hard Drive Docking Stations or into desktop or laptop computers. The enclosure also features a unique design that enables seamless data pass-through with no conversion bottlenecks, enabling the m SATA drive to work as fast as its allowed by the host system/interface. ...
Available
£4.41
Easily install one 2.5" solid-state drive or hard drive into a 3.5" bay, without requiring any additional hardware or tools. This mounting bracket lets you quickly install a 2.5" SSD or HDD into a single 3.5" bay in a desktop PC or server, with no tools required. The tool-less mounting bracket supports a 2.5" solid-state drive or hard drive from 7 mm to 9.5 mm in height. The mounting bracket's tool-less design makes it fast & easy to install a 2.5" drive in a computer or server, without the need for additional hardware or tools. It's ideal for system administrators & integrators who are building or upgrading a computing solution for a wide range of businesses & organizations, including schools & hospitals, saving valuable time & effort on installation projects. The lightweight mounting bracket is designed for trouble-free, reliable performance. To install a drive, you simply secure it into the mounting bracket, without using tools. Then, you put the bracket into a 3.5" drive bay in your computer & the bracket holds the drive in place using the tool-less plastic pegs. ...
Available
£19.64
Turn a 2.5" SATA HDD/SSD into a 3.5" SATA Drive. The 25SAT35HDD 2.5" to 3.5" hard drive adapter enclosure turns a 2.5" SATA hard drive (HDD) or solid state drive (SSD) into a 3.5" drive. The adapter enclosure lets you substitute a 3.5" hard drive for a 2.5" SSD/HDD in any application that would typically require a 3.5" drive, such as desktop chassis, backplane, or docking station. The enclosure has the same

Dimensions as a standard 3.5" hard drive, including mounting points, & SATA connector locations. With support for drives up to 12.5mm in height, & high-capacity SATA I/II/III drives (tested up to 1TB) this HDD adapter ensures compatibility with virtually any 2.5" SATA hard drive or solid state drive.

...
Available
£12.33
Turn Virtually any 2.5" SATA or SAS Hard Drive into a 3.5" SATA Drive. The 25SATSAS35 2.5-inch SATA/SAS to 3.5-inch SATA Hard Drive Converter converts a 2.5-inch SATA or SAS hard drive (HDD) or solid state drive (SSD) into a 3.5-inch form factor SATA Hard Drive. The converter provides a versatile solution for 2.5-inch drive installations, enabling you to install a 2.5-inch SATA/SAS drive in a 3.5-inch bay, drive drawer caddy/tray, or into a 3.5-inch drive enclosure. To maximize performance & utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with compatible controller. Suitable for drives with a height of up to 15mm, virtually any 2.5-inch SATA or SAS hard drive can be made to look & function like a 3.5-inch hard drive
- complete with standard mounting points along the sides & bottom (including 3 points along the sides for compatibility with some Dell systems). The Drive Converter features a trayless design for simple drive installation & removal, & is constructed of durable, yet lightweight plastics, with ventilation openings to aid air flow & help keep hard drives running cooler.
...
Available
£36.34
The S2510BU3PWPS USB (Universal Serial Bus) 3.0 HDD Enclosure features keypad Encryption, enabling you to turn almost any 2.5-inch SATA hard drive (HDD) or solid state drive (SSD) into an AES-encrypted external hard drive. The enclosure supports large capacity hard drives (tested with up to 1TB), maximizing system storage expansion & backup capabilities. Using an Advanced Encryption Standard algorithm (256-bit AES), all of the data on hard drives installed within the enclosure is securely protected from unauthorized users. Encryption is performed completely in-hardware & real-time, ensuring maximum performance while eliminating the need for complicated software installation. Access to the encrypted content is allowed through the built-in keypad, so any system that supports a USB (Universal Serial Bus) storage device can be used to access the data. The S2510BU3PWPS encrypted HDD enclosure is backed by a Star Tech.com 2-year warranty & free lifetime technical support. *** The Star Tech.com Advantage*** -Real-time 256-bit AES encryption ensures data stored on your external drive is secure -Platform independent hardware encryption saves the hassle of installing software or drivers -Super Speed USB (Universal Serial Bus) 3.0 allows for up to 5 Gbps of data bandwidth for faster data transfers, while remaining backward compatible with USB (Universal Serial Bus) 2.0 systems ...
Available
£36.34
ISO drive emulation is an ideal solution for computers that do not have optical drives (i.e Ultrabooks™, Netbooks). Using hardware based ISO emulation, the S2510BU3ISO USB (Universal Serial Bus) 3.0 HDD Virtual ISO Enclosure means that you can easily create & mount up to 3 different virtual Blu-ray/DVD/CD ROM images, ensuring maximum performance while eliminating the hassle & expense of complicated virtual ISO software. This enclosure lets you turn almost any 2.5-inch SATA hard drive (HDD) or solid state drive (SSD) into an external virtual ROM drive through a USB (Universal Serial Bus) port (optimal performance with USB (Universal Serial Bus) 3.0, backward compatible with USB (Universal Serial Bus) 2.0). The enclosure supports large capacity hard drives (tested with up to 1TB), & also doubles as a standard external hard drive enclosure that can be used to maximize system storage expansion & backup capabilities. The S2510BU3ISO virtual ISO HDD enclosure is backed by a Star Tech.com 2-year warranty & free lifetime technical support. The Star Tech.com Advantage -Hardware based ISO emulation is fast & platform independant, requiring no software or driver installation -Super Speed USB (Universal Serial Bus) 3.0 allows for up to 5 Gbps of data bandwidth for faster data transfers, while remaining backward compatible with USB (Universal Serial Bus) 2.0 systems ...
Available
£25.54
The S2510SM12U33 USB (Universal Serial Bus) 3.0 to SATA hard drive enclosure with UASP enables you to connect a 2.5" SATA hard drive or solid state drive to your computer through an available USB (Universal Serial Bus) port. With support for drives up to 12.5 mm in height, & high-capacity SATA I/II/III drives, this versatile USB (Universal Serial Bus) 3.0 enclosure ensures compatibility with virtually any 2.5" SATA hard drive or solid state drive. To maximize performance & better utilize the full potential of your SATA III SSD/HDD the enclosure supports UASP, which allows for transfer speeds up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. The USB (Universal Serial Bus) 3.0 enclosure features a sleek design with high-quality aluminum construction & ventilation, ensuring excellent heat dissipation. The S2510SM12U33 requires no external power adapter to maximize portability. ...
Available

StarTech.com 2.5 To 3.5 Hard Drive Adapter

Turn almost any 2.5" SATA/SAS drive into a 3.5" drive. This 2.5" to 3.5" hard drive adapter lets you install a 2.5" SATA or SAS hard drive (HDD) or solid-state drive (SSD) into an internal or external 3.5" drive bay, using standard drive-mounting holes. The 2.5" to 3.5" hard drive bay adapter lets you install a newer, higher performance drive such as an SSD into a legacy system that may only support a 3.5" hard drive. It provides a cost-efficient way to enhance storage performance and reliability without expensive upgrades to core IT systems. It's also ideal for system administrators who want to build a system that takes advantage of the increased performance of a 2.5" HDD/SSD. To utilize the full speed potential of your SATA/SAS drive, the adapter supports transfer speeds up to 6Gbps.
You can install the adapter into a desktop, server, storage-array, hot-swap bay, and drive drawer. It offers permanent installation in a 3.5" drive bay with standard mounting holes. When the adapter is installed, you simply slide a 2.5" HDD/SSD into the adapter enclosure, with no tools required. The adapter is suitable for drives with a height of up to 15 mm. Virtually any 2.5" SATA/SAS drive can be made to look and function like a 3.5" drive. The adapter includes a label you can use to track and record information about the installed drive.
Availability: In Stock
£26.17

Product Description

Turn almost any 2.5" SATA/SAS drive into a 3.5" drive. This 2.5" to 3.5" hard drive adapter lets you install a 2.5" SATA or SAS hard drive (HDD) or solid-state drive (SSD) into an internal or external 3.5" drive bay, using standard drive-mounting holes. The 2.5" to 3.5" hard drive bay adapter lets you install a newer, higher performance drive such as an SSD into a legacy system that may only support a 3.5" hard drive. It provides a cost-efficient way to enhance storage performance & reliability without expensive upgrades to core IT systems. It's also ideal for system administrators who want to build a system that takes advantage of the increased performance of a 2.5" HDD/SSD. To utilize the full speed potential of your SATA/SAS drive, the adapter supports transfer speeds up to 6 Gbps. You can install the adapter into a desktop, server, storage-array, hot-swap bay, & drive drawer. It offers permanent installation in a 3.5" drive bay with standard mounting holes. When the adapter is installed, you simply slide a 2.5" HDD/SSD into the adapter enclosure, with no tools required. The adapter is suitable for drives with a height of up to 15 mm. Virtually any 2.5" SATA/SAS drive can be made to look & function like a 3.5" drive. The adapter

Includes::
a label you can use to track & record information about the installed drive.

Reviews/Comments

Add New

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

HDD - Hadr disk drive - an electronic storage media
SATA - Serial Advanced Technology Attachment - a connection type for additional drives
HDD - Hard Disk Drive, an electronic storage device
hot - An indication of the temperature being high and a sensation of heat to the tough
speed - A measurement of how fast an object travels between two points
Permanent - Something that is long term and most likely to be around forever.
Install - A process of putting materials together to create a finished product.
Drawer - A compartment that opened and closes horizontally to store items in, for example stationary in a desk.
Solid - Something that is firm and not liquid, a hard shape that cannot be changed easily.
Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.
Ideal - Something that satisfies a perfect criteria.

Supplier Information

Page Updated: 2022-10-13 15:56:15

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu