Add 2 RS-232 serial ports to your standard or small form factor computer through a PCI Express expansion slot. The PEX2S553B 2-Port PCI Express Serial Card w/ Breakout Cable lets you add two RS232 serial ports using a single PCIe expansion slot. With the included break-out cable, you can easily add two ports to a single low profile slot. The PCIe serial card features a native single-chip design that provides optimum reliability & speed, reducing the CPU load by up to 48% over conventional bridge-chip serial cards
- a cost-effective solution for connecting legacy serial devices to PCIe enabled computers. The multiport PCIe Serial Adapter

Includes:: both full & low-profile/half-height brackets for compatibility with standard & small form factor computers, & is compatible with a broad range of operating systems, including Windows 7/ Server 2008 R2, 2003/ Vista/XP (32 & 64 bit), Linux Kernel 2.6.11 & up, as well as MAC OS 10.5 & above. This product is a replacement for the PEX2S552B card.


...

This RS232 Serial Adapter Card lets you add two RS232 (DB9) serial ports to your computer through a PCI Express (PCIe) slot. It enables you to interact with serial devices, such as card readers, printers, PIN pads, & modems, at speeds of up to 921.4 Kbps. With broad OS support, including for Windows & Linux, this PCI Express card is easy to integrate into mixed environments. The card comes pre-configured with a low-profile bracket, &

Includes:: an optional full-profile bracket, so installation is easy regardless of the case form factor. This PCIe to serial adapter supports the following

Features: Compatible with industry standard 16950 UART; Supports max baud rate of up-to 921.4 Kbps; Provides 5/12V power output on Pin 9 when external power is connected; 128-byte depth FIFO per transmitter & receiver; Supports 9, 8, 7, 6, 5 data bits; Asix AX99100 chipset; PCI Express 1.1 compliant.



...

This two port Ethernet-to-Remote Serial interface converter lets you install RS 232 serial devices anywhere on your TCP/IP Ethernet WAN/LAN, & your serial devices will perform as if they were right beside you
- even over the Internet! Even at the longest distances, control of your serial devices will be right at your fingertips: the remote serial ports appear alongside your local serial ports in your Windows device manager. The Serial Ethernet IP Adapter (Device Server, Console Server) is designed to function seamlessly with your other serial ports for totally transparent operation. Your serial equipment
- card scanners, access keypads, bar code scanners, & more
- will operate as smoothly as if the serial ports were right inside your computer. For industrial automation, security, Point of Sale, or any time you need reliable, long-range serial communications, this converter will deliver superior performance in any environment.


...

This two port Ethernet-to-Remote Serial interface converter lets you install RS 232 serial devices anywhere on your TCP/IP Ethernet WAN/LAN, & your serial devices will perform as if they were right beside you
- even over the Internet! Even at the longest distances, control of your serial devices will be right at your fingertips: the remote serial ports appear alongside your local serial ports in your Windows device manager. The Serial Ethernet IP Adapter (Device Server, Console Server) is designed to function seamlessly with your other serial ports for totally transparent operation. Your serial equipment
- card scanners, access keypads, bar code scanners, & more
- will operate as smoothly as if the serial ports were right inside your computer. For industrial automation, security, Point of Sale, or any time you need reliable, long-range serial communications, this converter will deliver superior performance in any environment.


...

Control & communicate with two serial devices even with mixed RS-232 & 485 protocols. The PCI2S232485I PCI Serial Adapter Card lets you turn a PCI or PCI-X slot into 2 serial ports capable of communicating in RS-232, RS-422, or RS-485 operating modes, at baud rates up to 921.6 Kbps. This universal serial adapter not only features two DB9 serial ports that can be independently configured, but also supports nearly any configuration including: RS-422, RS-485 2-wire, RS-485 4-wire, or RS-232 modes. Designed for reliability, this 2-port PCI Serial card also features built-in ESD (Electro-Static Discharge) protection to ensure that your connected serial devices remain protected. For added versatility, the PCI RS232 card is compatible with a broad range of operating systems, including Windows, Windows Server, Windows Embedded & Linux platforms, for simple installation into mixed environments. ...

The ECESAT32 2 Port Express Card e SATA Controller Card (6 Gbps) offers simple connectivity between a laptop computer with Express Card slot & e SATA 3.0 devices
- a cost-effective solution for connecting high-speed storage, such as High RPM Hard Drives & Solid State Drives (SSD), which in turn allows for easier data backups & archiving. With full support for SATA 3.0 hard drives & data transfer speeds of up to 6 Gbps, the Express Card adapter features a native PCI Express single chipset that provides enhanced compatibility, reliability & performance for external SATA 600 MB/s storage needs. The Expresscard is backward compatible with SATA 2.0 devices, providing the versatility to use older storage, & features port multiplier capability with comm&-based & FIS-based switching for connecting multiple external hard drives to a laptop through a single external SATA connection.
...

The PEXSAT32 2-Port PCI Express SATA 6 Gbps (SATA 3.0) Controller Card offers simple connectivity between a host computer & SATA 3.0 devices
- a cost-effective solution for connecting high-speed storage, such as High RPM Hard Drives & Solid State Drives (SSD), which in turn allows for easier data backups & archiving. With full support for SATA 3.0 hard drives & data transfer speeds of up to 6 Gbps, the adapter card features a native PCI Express single chipset that provides enhanced compatibility, reliability & performance for external SATA 600 MB/s storage needs. The controller card is backward compatible with SATA 2.0 devices, providing the versatility to use older storage, & features port multiplier capability with comm&-based & FIS-based switching for connecting multiple external hard drives to a host PC through a single external SATA connection. A dual profile solution, the SATA 3.0 controller card

Includes:: a low profile bracket for installation in slimline or small form factor computer cases.


...

The PEXESAT32 2 Port PCI Express e SATA 6 Gbps Controller Card offers simple connectivity between a host computer & e SATA 3.0 devices
-
...

The PEXESAT32 2 Port PCI Express e SATA 6 Gbps Controller Card offers simple connectivity between a host computer & e SATA 3.0 devices
-
...

The PEXSAT32 2-Port PCI Express SATA 6 Gbps (SATA 3.0) Controller Card offers simple connectivity between a host computer & SATA 3.0 devices
- a cost-effective solution for connecting high-speed storage, such as High RPM Hard Drives & Solid State Drives (SSD), which in turn allows for easier data backups & archiving. With full support for SATA 3.0 hard drives & data transfer speeds of up to 6 Gbps, the adapter card features a native PCI Express single chipset that provides enhanced compatibility, reliability & performance for external SATA 600 MB/s storage needs. The controller card is backward compatible with SATA 2.0 devices, providing the versatility to use older storage, & features port multiplier capability with comm&-based & FIS-based switching for connecting multiple external hard drives to a host PC through a single external SATA connection. A dual profile solution, the SATA 3.0 controller card

Includes:: a low profile bracket for installation in slimline or small form factor computer cases.


...