Add two RS232 serial ports to an embedded system with a mini PCI-Express slot. The MPEX2S952 2-port mini PCI Express serial card turns a mini-PCIe slot into two RS232 (DB9) serial ports
- a cost-saving solution for adding legacy serial support for embedded systems that arent normally compatible. The adapter card features a native PCI Express single chip design, which means that you can take advantage of full PCI Express capability by providing enhanced speed & reliability while reducing the load applied to the CPU by as much as 48% over conventional "bridge chip" serial cards. The 2-port mini PCI Express RS232 serial card is designed & constructed to provide long-lasting durability & reliability.
...

Add two USB (Universal Serial Bus) 3.0 ports through a Mini PCI Express slot. The MPEXUSB3S22B 2-Port Mini PCI Express USB (Universal Serial Bus) 3.0 Card with Bracket Kit adds two external USB (Universal Serial Bus) 3.0 ports to small form-factor systems, for connecting a variety of different peripherals. The card also

Includes:: optional standard & low profile brackets to fit a rear expansion bay if needed. The Mini PCIe USB (Universal Serial Bus) 3.0 card supports the full Super Speed USB (Universal Serial Bus)

Specification, with fast data transfer speeds (up to 5 Gbps), as well as 900m A of power per port, making it a convenient addition for connecting your USB (Universal Serial Bus) 3.0 peripheral devices. Enhanced with UASP support (USB Attached SCSI Protocol), this USB (Universal Serial Bus) 3.0 controller performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP supported enclosure (Note: UASP requires a compatible operating system). Using a more efficient protocol than the traditional USB (Universal Serial Bus) BOT (Bulk-Only Transport), UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data transfers. Using the Mini PCI Express (Mini Card) form factor & offering compliance with PCI Express Gen 2, this adapter card is designed for use in the latest small form factor computer systems, such as Mini-ITX or custom embedded solutions where a standard PCIe card would not fit. UASP is supported in Windows 8, Server 2012 & Linux kernel 2.6.3 or later. In testing UASP performed with up to a 70% faster read / 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing, UASP also showed up to an 80% reduction in required processor resources. Test results were obtained using an Intel Ivy Bridge system, Star Tech.com add-on USB (Universal Serial Bus) 3.0 cards, a UASP-enabled Star Tech.com enclosure, & a SATA III solid state drive.



...

Control 2 USB (Universal Serial Bus)-enabled computers from a single keyboard, mouse & monitor;

Includes::

...

Add 2 high-speed RS-232 Serial ports to your notebook computer via an Express Card slot. This 2 Port Express Card-based Serial Card lets you add 2 RS232 serial ports to your laptop or Express Card equipped desktop computer, using an available Express Card slot. Featuring 128-byte FIFO communication, & a high performance 16C950 UART, the Express Card Serial Adapter card offers baud rates up to 115.2 Kbps, which ensures peak communication with your serial peripheral devices. The serial card is designed based on a single-chip architecture (as opposed to cards that use a "bridge chip"), providing native PCI Express communication for greater performance & reliability, as well as reduced power consumption & CPU load. Compatible with Express Card /34mm & Express Card 54mm card slots, the 2 Port Serial Express Card

Includes:: a slot spacer for greater security while installed in 54mm slots.

...

Add 2 high-speed RS-232 Serial ports to your notebook computer via an Express Card slot. This 2 Port Express Card-based Serial Card lets you add 2 RS232 serial ports to your laptop or Express Card equipped desktop computer, using an available Express Card slot. Featuring 128-byte FIFO communication, & a high performance 16C950 UART, the Express Card Serial Adapter card offers baud rates up to 115.2 Kbps, which ensures peak communication with your serial peripheral devices. The serial card is designed based on a single-chip architecture (as opposed to cards that use a "bridge chip"), providing native PCI Express communication for greater performance & reliability, as well as reduced power consumption & CPU load. Compatible with Express Card /34mm & Express Card 54mm card slots, the 2 Port Serial Express Card

Includes:: a slot spacer for greater security while installed in 54mm slots.

...

The PEX2S553 PCI Express serial card lets you turn a PCI Express slot into 2 RS232 (DB9) serial ports. Based on a native single chip design (no bridge chip), this 2-port serial adapter card means that you can harness the full capability offered by PCI Express (PCIe), & reducing the load applied to the CPU by as much as 48% over conventional serial cards. The RS232 Serial adapter card (PEX2S553) is compatible with a broad range of operating systems including Windows 2000/XP/2003/ Vista/ Windows 7/ Server 2008 R2 (32 & 64 bit), Linux Kernel 2.6.11 & up, & MAC OS 10.4 & above. Plus, the serial card

Includes:: an optional half-height/low profile bracket that allows the card to be installed in any PCI Express slot, regardless of the size of the computer case. This product is a replacement for the PEX2S552 card.

...

Add 2 RS-232 serial ports to your full height or low profile computer through a PCI Express slot. The PEX2S952 PCI Express based serial card turns a PCI Express slot into 2 RS-232 (DB9) serial connections. The adapter card is based on a native single chip design, that means that you can harness the full capability of PCI Express (PCIe)
- providing optimum reliability & speed while reducing the load applied to the CPU by as much as 48% over conventional (bridge chip) serial cards. The RS232 Serial Adapter Card is compatible with a broad range of operating systems, including Windows & Linux (Kernel 2.6.11 & up). Plus, the adapter card

Includes:: an optional half-height/low profile bracket that allows the card to be installed in virtually any computer case
- making it that much easier to add serial ports to a PCI Express enabled computer, regardless of the size of the computer case.



...

Add 2 RS-232 serial ports to your full height or low profile computer through a PCI Express slot. The PEX2S952 PCI Express based serial card turns a PCI Express slot into 2 RS-232 (DB9) serial connections. The adapter card is based on a native single chip design, that means that you can harness the full capability of PCI Express (PCIe)
- providing optimum reliability & speed while reducing the load applied to the CPU by as much as 48% over conventional (bridge chip) serial cards. The RS232 Serial Adapter Card is compatible with a broad range of operating systems, including Windows & Linux (Kernel 2.6.11 & up). Plus, the adapter card

Includes:: an optional half-height/low profile bracket that allows the card to be installed in virtually any computer case
- making it that much easier to add serial ports to a PCI Express enabled computer, regardless of the size of the computer case.



...

Extend a USB (Universal Serial Bus) 3.0 Motherboard Header into Two Panel-mount USB (Universal Serial Bus) 3.0-A Ports. The USB3SPNLAFHD 2-Port USB (Universal Serial Bus) 3.0 to Panel mount USB (Universal Serial Bus) cable features a 20-pin USB (Universal Serial Bus) 3.0 motherboard header connection on one end, breaking off into two separate USB (Universal Serial Bus) 3.0-A (female) ports on the other end of the cable. The USB (Universal Serial Bus) 3.0 panel mount cable offers a convenient solution for connecting bootable thumb drives or authentication fobs etc. to the motherboard USB (Universal Serial Bus) 3.0 connection. ...

Extend a USB (Universal Serial Bus) 3.0 Motherboard Header into Two Panel-mount USB (Universal Serial Bus) 3.0-A Ports. The USB3SPNLAFHD 2-Port USB (Universal Serial Bus) 3.0 to Panel mount USB (Universal Serial Bus) cable features a 20-pin USB (Universal Serial Bus) 3.0 motherboard header connection on one end, breaking off into two separate USB (Universal Serial Bus) 3.0-A (female) ports on the other end of the cable. The USB (Universal Serial Bus) 3.0 panel mount cable offers a convenient solution for connecting bootable thumb drives or authentication fobs etc. to the motherboard USB (Universal Serial Bus) 3.0 connection. ...