Exactly duplicate one 2.5in or 3.5in SATA hard drive to another, effortlessly & without a computer. The SATDOCK22RE USB (Universal Serial Bus) & e SATA Standalone Duplicator Dock lets you duplicate/clone an existing hard drive without the use of a host computer system, or can be connected to a computer system for use as an external hard drive dock. As a hard drive duplicator, you can create an exact 1 to 1 sector clone from one hard drive to another, including partition & boot sector information & all data, at a rate of 72MB/second
- ensuring data integrity & consistency for sensitive operations, such as data recovery. As an external hard drive dock, the duplicator/dock supports plug-&-play installation & can be connected to your host computer through USB (Universal Serial Bus) 2.0 or e SATA, providing data transfer speeds up to 480 Mbps or 3 Gbps respectively from the hard drives to your computer system. Large capacity drives (tested with up to 4TB 3.5" & 1TB 2.5" drives per bay) can be used to greatly enhance your computers storage/backup capabilities. Not having to install the hard drives into an enclosure or tray system allows for quick setups
- a perfect solution for situations that require swapping through multiple drives, which combined with no driver or software installation requirements delivers a convenient & versatile storage solution. The value of this hard drive docking station can be extended, using a SATA to IDE hard drive adapter (SAT2IDEADP), which enables you to use any 2.5 or 3.5in IDE hard drive in a SATA hard drive dock slot.

...

The SATDUPUEGB Portable SATA Hard Drive Duplicator with e SATA & USB (Universal Serial Bus) offers an easy, hardware solution for duplicating/cloning a SATA hard drive, or can be connected to a desktop or laptop computer for use as an external hard drive dock. As a standalone hard drive duplicator, the SATDUPUEGB lets you can create an exact 1-to-1 sector clone from one hard drive to another, including partition & boot sector information & all data, at a rate of up to 72 MBps; as an external hard drive dock, it supports plug-&-play installation & can be connected to a host computer through either USB (Universal Serial Bus) 2.0 or e SATA, providing data transfer speeds of up to 480 Mbps or 3 Gbps respectively. ...

The SATDUPUEGB Portable SATA Hard Drive Duplicator with e SATA & USB (Universal Serial Bus) offers an easy, hardware solution for duplicating/cloning a SATA hard drive, or can be connected to a desktop or laptop computer for use as an external hard drive dock. As a standalone hard drive duplicator, the SATDUPUEGB lets you can create an exact 1-to-1 sector clone from one hard drive to another, including partition & boot sector information & all data, at a rate of up to 72 MBps; as an external hard drive dock, it supports plug-&-play installation & can be connected to a host computer through either USB (Universal Serial Bus) 2.0 or e SATA, providing data transfer speeds of up to 480 Mbps or 3 Gbps respectively. ...

Turn a 2.5in SATA hard drive into a USB2.0 or e SATA external hard drive. This e SATA/USB External Hard Drive Enclosure transforms virtually any 2.5in SATA (SATA, SATA II, SATA III) laptop hard drive or solid state drive (SSD) into the perfect portable storage solution! Ideal for storing digital multimedia & other demanding applications, the external HDD enclosure lets you get the most out of your hard drive, connecting to a host computer using USB (Universal Serial Bus) 2.0 (also backward compatible with USB (Universal Serial Bus) 1.1) or e SATA, for maximum data transfer rates of up to 3 Gbps (using e SATA). Large capacity drives (tested with up to 1TB) can be used to greatly enhance your computers storage/backup capabilities. A truly portable solution, SAT2510U2E features lightweight, yet durable aluminum construction, as well as a small form factor design that fits perfectly into your pocket or notebook bag when not in use. &, to eliminate the hassle of having to find a power outlet when you are ready to back up your data or load your stored files, the enclosure offers USB (Universal Serial Bus) powered operation, requiring no external power supply. ...

Turn a 2.5in SATA hard drive into a USB2.0 or e SATA external hard drive. This e SATA/USB External Hard Drive Enclosure transforms virtually any 2.5" SATA (SATA, SATA II, SATA III) hard drive or solid state drive (SSD) into a cost-effective portable storage solution. Ideal for storing digital multimedia & other demanding applications, the 2.5" SATA hard drive enclosure connects to a host computer using USB (Universal Serial Bus) 2.0 or e SATA with support for data transfer rates of up to 3 Gbps (using e SATA) or 480 Mbps (through USB (Universal Serial Bus) 2.0). Large capacity drives (tested with up to 1TB) can be used to greatly enhance your computers storage/backup capabilities. A truly portable solution, the compact hard drive enclosure features lightweight yet durable aluminum construction, as well as a small form factor design that fits perfectly into your pocket or notebook bag when not in use. To eliminate the hassle of having to find a power outlet when you are ready to back up data or load your stored files, the USB/e SATA enclosure offers USB (Universal Serial Bus)-powered operation, requiring no external power supply. ...

Turn a 2.5" SATA III HDD / SSD into an external hard drive that can connect to your computer through either e SATAp at 6 Gbps, or USB (Universal Serial Bus) 3.0 with UASP at 5 Gbps. The S251SMU33EP USB (Universal Serial Bus) 3.0 / e SATAp drive enclosure turns a 2.5in SATA hard drive (HDD) or solid state drive (SSD) into an external portable hard drive that can connect to any USB (Universal Serial Bus) or e SATA-enabled computer system. For fast performance & efficient data transfers when connected through e SATA, the enclosure supports full SATA III transfer speeds
- up to 6 Gbps. For universal compatibility, the S251SMU33EP can be connected through USB (Universal Serial Bus) 3.0 with transfer speeds up 5 Gbps plus support for UASP, which delivers performance up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. Designed for maximum portability, the S251SMU33EP doesn't require an external power adapter when connected to an e SATAp (USB + e SATA combo) host port. The 2.5in enclosure supports the fastest drive technologies including SATA III (6 Gbps), hybrid drives & solid state drives (SSD), saving you time by ensuring you're getting the most out of your drive performance. To ensure compatibility with your computer system, the S251SMU33EP supports all of the leading operating systems, including: Microsoft Windows, Apple OSX, Linux, & Google Chrome OS. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing, UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP-enabled Star Tech.com Enclosure, & a SATA III solid state drive.
...

Turn a 2.5" SATA III HDD / SSD into an external hard drive that can connect to your computer through either e SATAp at 6 Gbps, or USB (Universal Serial Bus) 3.0 with UASP at 5 Gbps. The S251SMU33EP USB (Universal Serial Bus) 3.0 / e SATAp drive enclosure turns a 2.5in SATA hard drive (HDD) or solid state drive (SSD) into an external portable hard drive that can connect to any USB (Universal Serial Bus) or e SATA-enabled computer system. For fast performance & efficient data transfers when connected through e SATA, the enclosure supports full SATA III transfer speeds
- up to 6 Gbps. For universal compatibility, the S251SMU33EP can be connected through USB (Universal Serial Bus) 3.0 with transfer speeds up 5 Gbps plus support for UASP, which delivers performance up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. Designed for maximum portability, the S251SMU33EP doesn't require an external power adapter when connected to an e SATAp (USB + e SATA combo) host port. The 2.5in enclosure supports the fastest drive technologies including SATA III (6 Gbps), hybrid drives & solid state drives (SSD), saving you time by ensuring you're getting the most out of your drive performance. To ensure compatibility with your computer system, the S251SMU33EP supports all of the leading operating systems, including: Microsoft Windows, Apple OSX, Linux, & Google Chrome OS. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing, UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP-enabled Star Tech.com Enclosure, & a SATA III solid state drive.
...

Prevents dangerous electrostatic buildup while working on electronics. This durable ESD anti-static wrist strap helps you protect your valuable computer equipment from dangerous static electricity. The wrist strap/grounding bracelet offers hassle-free electrostatic grounding, allowing you to work freely on your computer without having to worry about static build-up, which could potentially damage computer components. Designed & constructed to exceed IBM & US military static control standards, the grounding bracelet/ESD wrist strap is made from the highest quality static dissipative material to ensure the safe operation of your equipment. ...

Add an un-managed, 20-slot media converter chassis to your rack or cabinet. The ETCHS2U 20-Slot 2U Rack Mount Media Converter Chassis for ET Series 2 Media Converters lets you add an un-managed, 20-slot media converter chassis to your rack or cabinet to provide central power & cooling. The media converter rack

Includes:: a single 200W power supply to centrally power all 20 slots, with an additional slot to add a redundant power supply (ETCHS2UPSU) for maximum up-time. It also

Includes:: two cooling fans (one per side) to help extend the life of your media converters. A perfect accessory to the Star Tech.com ET series 2 converters, the 2U chassis is designed so that all critical components (Power, Fans & Media Converter Cards) are hot swappable to avoid network disruption.



...

This Ethernet fiber media converter offers an easy, cost-effective way to extend your network over fiber, using the SFP+ of your choice. It converts a copper RJ45 Ethernet connection to 10 Gigabit fiber, to extend your network over longer distances or connect workstations to switches. The RJ45 to fiber media converter provides a cost-efficient way to connect an Ethernet network to remote devices over a fiber backbone. It features an open SFP+ slot that supports the MSA-compliant 10 Gigabit SFP+ that best suits your fiber connection setup (single mode/multimode) & distance requirements. The 10 Gb fiber media converter supports auto-negotiation while providing versatile connectivity to existing networks & devices, maximizing the usage & performance of legacy equipment. Network Compatibility: 10GBASE-ER; 10GBASE-LR; 10GBASE-LW; 10GBASE-EW; 10GBASE-R; 10GBASE-SR; 10GBASE-SW; 10GBASE-T. The unmanaged fiber media converter has a standalone compact design with simple plug-&-play setup to ensure fast & easy installation. Overcome the distance limitations of traditional network cables with Star Tech.com fiber media converters. The converters connect different types of network cabling & help you extend networks between buildings & over longer distances. Whether you need to extend a network connection 550 m or 40 km, Star Tech.com can help you. ...