Category 6A Ethernet cable, commonly referred to as Cat 6A, is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6, Cat 5e & Cat 5.
- LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire.
- Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet, 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second).
- S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference).
- Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation.
- Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device.
- This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2
- IEC 60332-1-2, Ro HS Compliant & 3P Verified






...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded, relying on the twisted pair design for noise rejection, some are shielded. Often used in computer networks such as Ethernet.
- UTP (Unshielded Twisted Pair)
- CAT5e
- 100 M Hz
- Moulded Connectors
- 26AWG 4PR
- ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3P





...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded, relying on the twisted pair design for noise rejection, some are shielded. Often used in computer networks such as Ethernet.
- UTP (Unshielded Twisted Pair)
- CAT5e
- 100 M Hz
- Moulded Connectors
- 26AWG 4PR
- ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3P





...

Category 6A Ethernet cable, commonly referred to as Cat 6A, is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6, Cat 5e & Cat 5.
- LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire.
- Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet, 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second).
- S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference).
- Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation.
- Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device.
- This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2
- IEC 60332-1-2, Ro HS Compliant & 3P Verified






...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded, relying on the twisted pair design for noise rejection, some are shielded. Often used in computer networks such as Ethernet. The specially designed Category 5e flat network cables are suitable for any application but are particularly useful for laying under carpets & flooring. Available in 3 colours grey, blue, black & a variety of lengths. ...

Category 6 cable, commonly referred to as Cat-6, is a cable standard for Gigabit Ethernet & other network protocols that are backward compatible with the Category 5/5e & Category 3 cable standards. Compared with Cat-5 & Cat-5e, Cat-6 features more stringent specifications for crosstalk & system noise. The cable standard provides performance of up to 250 MHz. ...

The UK to IEC C15 mains cable, more commonly known as a kettle lead is used for powering a variety of electrical appliances such as PC base units, monitors, printers & photocopiers & a whole host of other equipment including high temperature devices such as kettles. The C15 connector, although similar in appearance to the C13 has a higher temperature rating of 170 degrees rather than 70 degrees. You can tell the difference between a C13 & a C15 connector by the notch in the connector; this means a C15 plug will work with a C14 & a C16 socket. A C13 plug however will only work in a C14 socket. ...

The IEC (C13) to UK mains cable, more commonly know as a kettle lead is used for powering a variety of electrical appliances such as PC base units, monitors, printers & photocopiers & a whole host of other equipment. The PVC connectors are sonically welded to provide a high quality cable which is perfect for home or office use. ...

Category 6 cable, commonly referred to as Cat-6, is a cable standard for Gigabit Ethernet & other network protocols that are backward compatible with the Category 5/5e & Category 3 cable standards. Compared with Cat-5 & Cat-5e, Cat-6 features more stringent specifications for crosstalk & system noise. The cable standard provides performance of up to 250 MHz. ...

Category 6 cable, commonly referred to as Cat-6, is a cable standard for Gigabit Ethernet & other network protocols that are backward compatible with the Category 5/5e & Category 3 cable standards. Compared with Cat-5 & Cat-5e, Cat-6 features more stringent specifications for crosstalk & system noise. The cable standard provides performance of up to 250 MHz. ...