The USB (Universal Serial Bus) 2.0 active extension cable can be used to extend the cable length of any USB (Universal Serial Bus) 2.0 device. The extension acts as a transparent hub & buffers all upstream & downstream traffic. This is to ensure that the signal meets the electrical & timing specifications. Using passive extension cables can result in timing errors & data loss. ...

The concept of Best value is to offer customers the best value product, sourced from a variety of manufacturers all ...

The USB (Universal Serial Bus) Port Blocker means that you can deny access to any USB (Universal Serial Bus) socket. This is useful to stop flash drives & external hard drives being connected to a computer or server to copy sensitive data, stop the delivery of viruses, keyloggers & other malicious programs. It will also stop people connecting & charging mobile devices. Insert lock into a USB (Universal Serial Bus) port with the key Squeeze the side buttons & pull out To remove the lock, insert the key into the USB (Universal Serial Bus) lock & pull out without squeezing the side buttons. Once the blocker is in place it will be very difficult to remove without damaging the USB (Universal Serial Bus) port unless you have the key.

Features:
- Blocks Type A female USB (Universal Serial Bus) Ports
- Stores 3 blockers in key case
- Light & compact
- Extra 10 blocks available (sold seperately) Contents:
- USB (Universal Serial Bus) Key
- 3 port blocks







...

This device must be installed by a competent person, in accordance with the current edition of the IET Wiring Regulations (BS7671) & Building Regulations. Please read these instructions carefully before commencing with installation. Failure to install correctly will negate the product warranty. The Dual Power Socket with Dual USB (Universal Serial Bus) Outlet means that you can charge / power 2x USB (Universal Serial Bus) devices & 2 other electrical items from one double wall plate. The USB (Universal Serial Bus) charging sockets are compatible with items such as smart phones, tablets & other devices that require charging via a USB (Universal Serial Bus) port. The USB (Universal Serial Bus) charging sockets have a total output of 2 amps (combined); if the current exceeds this it will automatically shut down to protect your device. This dual switched socket will fit any standard dual 25mm deep wall box. ** Instructions**
- Firstly, ensure you isolate the mains power supply & remove the fuse in the fuse box or switch off the circuit breaker in the consumer unit.
- Following the diagram over-leaf pass the cable through the entry holes & connect to the appropriate terminal.
- If an Earth loop connection is required, use the additional earth terminal block located in the back box.
- Re-connect the mains supply when the installation is correctly completed.
- Before use we recommend that a socket test is carried out.
- DO NOT MEGGER TEST
- this will damage the USB (Universal Serial Bus) charging circuit.
- The USB (Universal Serial Bus) charger will have a minimal quiescent current (should be no greater than 5m A). When a device is plugged it will determine how many amps the product needs & output at that rate. ** Specifications**
- Working voltage: 13A, 250V
- Working temperature -15 to 40 C
- USB (Universal Serial Bus) Output: 2A, 5V
- UK 3 pin socket output: 13A, 250V
- Fits any standard back box (minimum depth of 25mm) ** Safety Information**
- We recommend using a competent person for installation.
- Only suitable for indoor installations.
- Before carrying out any electrical work, isolate















...

Category 6 cable, commonly referred to as Cat-6, is a cable standard for Gigabit Ethernet & other network protocols that are backward compatible with the Category 5/5e & Category 3 cable standards. Compared with Cat-5 & Cat-5e, Cat-6 features more stringent specifications for crosstalk & system noise. The cable standard provides performance of up to 250 MHz. ...

The concept of Best value is to offer customers the best value product, sourced from a variety of manufacturers all ...

The concept of Best value is to offer customers the best value product, sourced from a variety of manufacturers all ...

Category 6 cable, commonly referred to as Cat-6, is a cable standard for Gigabit Ethernet & other network protocols that are backward compatible with the Category 5/5e & Category 3 cable standards. Compared with Cat-5 & Cat-5e, Cat-6 features more stringent specifications for crosstalk & system noise. The cable standard provides performance of up to 250 MHz. ...

Category 6 cable, commonly referred to as Cat-6, is a cable standard for Gigabit Ethernet & other network protocols that are backward compatible with the Category 5/5e & Category 3 cable standards. Compared with Cat-5 & Cat-5e, Cat-6 features more stringent specifications for crosstalk & system noise. The cable standard provides performance of up to 250 MHz. ...

Since 1993 Cables Directhave dedicated themselves to supplying cables & peripherals to an ever changing market place. In many cases Cables Direct is the first to supply the market with new design & innovative products, comprehensive range of USB (Universal Serial Bus) products, together with our large, competitive range of KVM products & computer modding accessories. ...