Fibre optic cables use glass threads (fibres) to transmit data. These fibres transmit the data by using modulated light waves. Fibre cables are popular because they have a much greater bandwidth than the standard copper networking cables. The cables have LC to LC connectors, grey low smoke zero halogen jacket & 62.5µm fibre core with 125µm cladding. ...

Cables Direct Cat 5e Utp 0.5m Cat 5e UTP 0.5m violet Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded, relying on the twisted pair design for noise rejection, some are shielded. Often used in computer networks such as Ethernet. Cables Direct Cat 5e UTP 0.5m, 0.5m, RJ-45, RJ-45, Cat 5e, Molded Cables Direct Cat 5e UTP 0.5m. Cable length: 0.5m, Connector 1: RJ-45, Connector 2: RJ-45. Cable type: Cat 5e, Connector (s): Molded 99TRT-600V Cables Direc ...

Category 6 cable, commonly referred to as Cat-6, is a cable standard for Gigabit Ethernet & other network protocols that are backward compatible with the Category 5/5e & Category 3 cable standards. Compared with Cat-5 & Cat-5e, Cat-6 features more stringent specifications for crosstalk & system noise. The cable standard provides performance of up to 250 MHz. ...

Category 6 cable, commonly referred to as Cat-6, is a cable standard for Gigabit Ethernet & other network protocols that are backward compatible with the Category 5/5e & Category 3 cable standards. Compared with Cat-5 & Cat-5e, Cat-6 features more stringent specifications for crosstalk & system noise. The cable standard provides performance of up to 250 MHz. ...

Category 6 cable, commonly referred to as Cat-6, is a cable standard for Gigabit Ethernet & other network protocols that are backward compatible with the Category 5/5e & Category 3 cable standards. Compared with Cat-5 & Cat-5e, Cat-6 features more stringent specifications for crosstalk & system noise. The cable standard provides performance of up to 250 MHz. ...

Category 6A Ethernet cable, commonly referred to as Cat 6A, is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6, Cat 5e & Cat 5.
- LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire.
- Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet, 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second).
- S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference).
- Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation.
- Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device
- This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2
- IEC 60332-1-2, Ro HS Compliant & 3P Verified






...

Category 6A Ethernet cable, commonly referred to as Cat 6A, is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6, Cat 5e & Cat 5.
- LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire.
- Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet, 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second).
- S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference).
- Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation.
- Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device
- This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2
- IEC 60332-1-2, Ro HS Compliant & 3P Verified






...

Category 6A Ethernet cable, commonly referred to as Cat 6A, is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6, Cat 5e & Cat 5.
- LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire.
- Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet, 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second).
- S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference).
- Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation.
- Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device
- This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2
- IEC 60332-1-2, Ro HS Compliant & 3P Verified






...

HDMI (High Definition Multimedia Interface) is a

Specification that combines video & audio into a single digital interface

...

The IEC (C13) to IEC (C14) extension cable, more commonly know as a kettle lead extension cable is used for powering a variety of electrical appliances such as PC base units, monitors, printers & photocopiers & a whole host of other equipment. The PVC connectors are sonically welded to provide a high quality cable which is perfect for home or office use. ...