The Wall Mount for the Logitech Connect offers security, stability, & convenience in a clean modern on wall install for conference rooms, huddle spaces, or other meeting spaces. The Logitech Connect wall mount is designed with 14 gauge steel that is capable of a sustained weight of 5 pounds—5 times greater than the weight of the Connect. The rubber cable grommet can channel an HDMI, USB (Universal Serial Bus), power cord, & lock through the mount providing strain relief to the cables & ensuring a clean installation. The mount is affixed to the wall with 3 tamper resistant screws. The Logitech Connect is clamped into the mount with a tamper resistant screw with 2 locking washers that ensure that it will not be removed from the mount. The clamp also maintains the vertical angle it is set to while still being able to rotate horizontally. Note: The Logitech Connect is not included with the mount. ...

Always start a meeting or class on time with the Wireless A/V for HDMI devices kit. This plug & play system allows A/V signals from a laptop, tablet, or Blu-ray player to wirelessly connect to two HDMI projectors or HDTVs located up to 30 metres (100 ft) away. Straightforward install There is no need for cables to be run under the floor, through the ceiling, or up a wall. Mount the receivers near the displays & the transmitter near the presenter, then make the connections for HDMI & power on both the transmitter & receivers. This do-it-yourself solution

Includes:: all the components required for the setup & does not require an experienced A/V installer. Just plug an HDMI cable into your laptop from the transmitter, & you are ready to present. This kit offers true plug & play operation, allowing any presenter to step up & start a meeting with no lost time. There is no software to install or update, so there is no need to request permissions from IT or wait for drivers to download. Effortless huddle space connectivity Just bring your own device to the huddle space & plug in. This simple, one connection solution allows for quick transition from one user to another Â- encouraging productivity, inspiration, & teamwork while presenting ideas. Any room can be retrofitted to be a huddle space, as the secure wireless transmission of A/V signal does not require new cables or existing cable infrastructure. De-cluttered conference room Set up a conference room without limitations using this wireless system. The displays do not have to be limited to where wire runs have been located. Place displays anywhere within 30 metres (100 feet) of the transmitter to achieve the optimal setup for any conference room. Trouble free classroom setup Setting up A/V equipment in a classroom often requires running cables in wall, this type of install requires specially rated cables & professional installation. With the Wireless AV for HDMI solution there is no need to run these

...

This Cisco WS-G5483 compatible GBIC transceiver provides 1000 Base-TX throughput up to 100m over a copper connection using a RJ-45 connector. Our transceiver is guaranteed to be 100% compatible with the equivalent Cisco transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized & data-traffic & application tested to ensure that it will initialize & perform identically. It is built to meet or exceed the specifications of Cisco, as well as to comply with multi-source agreement (MSA) standards to ensure seamless network integration. ...

This Cisco WS-G5486 compatible GBIC transceiver provides 1000 Base-LX throughput up to 10km over single-mode Fibre (SMF) at a wavelength of 1310nm using a SC connector. Our transceiver is guaranteed to be 100% compatible with the equivalent Cisco transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized & data-traffic & application tested to ensure that it will initialize & perform identically. It is built to meet or exceed the specifications of Cisco, as well as to comply with multi-source agreement (MSA) standards to ensure seamless network integration. ...

This Cisco X2-10GB-LR compatible X2 transceiver provides 10 G Base-LR throughput up to 10km over single-mode Fibre (SMF) at a wavelength of 1310nm using a SC connector. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. Our transceiver is guaranteed to be 100% compatible with the equivalent Cisco transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized & data-traffic & application tested to ensure that it will initialize & perform identically. It is built to meet or exceed the specifications of Cisco, as well as to comply with multi-source agreement (MSA) standards to ensure seamless network integration. ...

This Cisco XFP-10G-MM-SR compatible XFP transceiver provides 10 G Base-SR throughput up to 300m over multi-mode Fibre (MMF) at a wavelength of 850nm using a LC connector. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. Our transceiver is guaranteed to be 100% compatible with the equivalent Cisco transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized & data-traffic & application tested to ensure that it will initialize & perform identically. It is built to meet or exceed the specifications of Cisco, as well as to comply with multi-source agreement (MSA) standards to ensure seamless network integration. ...

This Juniper Networks XFP-10G-S compatible XFP transceiver provides 10 G Base-SR throughput up to 300m over multi-mode Fibre (MMF) at a wavelength of 850nm using a LC connector. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. Our transceiver is guaranteed to be 100% compatible with the equivalent Juniper Networks transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized & data-traffic & application tested to ensure that it will initialize & perform identically. It is built to meet or exceed the specifications of Juniper Networks, as well as to comply with multi-source agreement (MSA) standards to ensure seamless network integration. ...

This Cisco XFP10GLR-192SR-L compatible XFP transceiver provides 10 G Base-LR throughput up to 10km over single-mode Fibre (SMF) at a wavelength of 1310nm using a LC connector. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. Our transceiver is guaranteed to be 100% compatible with the equivalent Cisco transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized & data-traffic & application tested to ensure that it will initialize & perform identically. It is built to meet or exceed the specifications of Cisco, as well as to comply with multi-source agreement (MSA) standards to ensure seamless network integration. ...

Economical patch cables are recommended for connections between fibre patch panels, hubs, switches, media converters & routers, etc. Fibre optic cables provide higher speeds & increased bandwidth, compared to conventional twisted-pair copper cable. ...

Economical patch cables are recommended for connections between fibre patch panels, hubs, switches, media converters & routers, etc. Fibre optic cables provide higher speeds & increased bandwidth, compared to conventional twisted-pair copper cable. ...