Y power splitters from C2G easily attach additional hard drives, CD-ROMs, tape drivers, fans & CD-RWs to your computer's power supply. These cables meet or exceed industry standards. ...

This HP J4860C compatible SFP transceiver provides 1000 Base-ZX throughput up to 70km over single-mode Fibre (SMF) at a wavelength of 1550nm using a LC connector. Our transceiver is guaranteed to be 100% compatible with the equivalent HP transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized & data-traffic & application tested to ensure that it will initialize & perform identically. It is built to meet or exceed the specifications of HP, as well as to comply with multi-source agreement (MSA) standards to ensure seamless network integration. ...

This HP J9054C compatible SFP transceiver provides 100 Base-FX throughput up to 2km over multi-mode Fibre (MMF) at a wavelength of 1310nm using a LC connector. Our transceiver is guaranteed to be 100% compatible with the equivalent HP transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized & data-traffic & application tested to ensure that it will initialize & perform identically. It is built to meet or exceed the specifications of HP, as well as to comply with multi-source agreement (MSA) standards to ensure seamless network integration. ...

This SFP+ Transceiver Module is designed for use with Juniper Networks network equipment & is equivalent to Juniper Networks part number EX-SFP-10GE-LR. This transceiver is built to meet or exceed the specifications of the OEM & to comply with Multi-Source Agreement (MSA) standards. This product is 100% functionally tested, & compatibility is guaranteed. The transceiver is hot-swappable input/output device which allows a 10 Gigabit Ethernet port to link with a Fibre optic network. OEM specific configuration data is loaded on to the EEPROM of the transceiver at the factory, allowing this transceiver to initialize & perform identically to an OEM transceiver. This transceiver may be mixed & deployed with other OEM or third party transceivers & will deliver seamless network performance. A list of compatible network equipment is available on the Specs tab of this page. Juniper Networks & the Juniper Networks logo are trademarks or registered trademarks of Juniper Networks, Inc. This product is not certified or endorsed by Juniper Networks. ...

This SFP+ Transceiver Module is designed for use with Juniper Networks network equipment & is equivalent to Juniper Networks part number EX-SFP-10GE-SR. This transceiver is built to meet or exceed the specifications of the OEM & to comply with Multi-Source Agreement (MSA) standards. This product is 100% functionally tested, & compatibility is guaranteed. The transceiver is hot-swappable input/output device which allows a 10 Gigabit Ethernet port to link with a Fibre optic network. OEM specific configuration data is loaded on to the EEPROM of the transceiver at the factory, allowing this transceiver to initialize & perform identically to an OEM transceiver. This transceiver may be mixed & deployed with other OEM or third party transceivers & will deliver seamless network performance. A list of compatible network equipment is available on the Specs tab of this page. Juniper Networks & the Juniper Networks logo are trademarks or registered trademarks of Juniper Networks, Inc. This product is not certified or endorsed by Juniper Networks. ...

This SFP (mini-GBIC) Transceiver Module is designed for use with Juniper Networks network equipment & is equivalent to Juniper Networks part number EX-SFP-1GE-SX. This transceiver is built to meet or exceed the specifications of the OEM & to comply with Multi-Source Agreement (MSA) standards. This product is 100% functionally tested, & compatibility is guaranteed. The transceiver is hot-swappable input/output device which allows a Gigabit Ethernet port to link with a Fibre optic network. OEM specific configuration data is loaded on to the EEPROM of the transceiver at the factory, allowing this transceiver to initialize & perform identically to an OEM transceiver. This transceiver may be mixed & deployed with other OEM or third party transceivers & will deliver seamless network performance. A list of compatible network equipment is available on the Specs tab of this page. Juniper Networks & the Juniper Networks logo are trademarks or registered trademarks of Juniper Networks, Inc. This product is not certified or endorsed by Juniper Networks. ...

This SFP (mini-GBIC) Transceiver Module is designed for use with Juniper Networks network equipment & is equivalent to Juniper Networks part number SFP-1GE-LX. This transceiver is built to meet or exceed the specifications of the OEM & to comply with Multi-Source Agreement (MSA) standards. This product is 100% functionally tested, & compatibility is guaranteed. The transceiver is hot-swappable input/output device which allows a Gigabit Ethernet port to link with a Fibre optic network. OEM specific configuration data is loaded on to the EEPROM of the transceiver at the factory, allowing this transceiver to initialize & perform identically to an OEM transceiver. This transceiver may be mixed & deployed with other OEM or third party transceivers & will deliver seamless network performance. A list of compatible network equipment is available on the Specs tab of this page. Juniper Networks & the Juniper Networks logo are trademarks or registered trademarks of Juniper Networks, Inc. This product is not certified or endorsed by Juniper Networks. ...

With LC to SC termination, this high quality fibre optic patch cable is specificially designed for fast ethernet, fibre channel, ATM & gigabit ethernet applications. The small LC connectors satisfy the need for higher port density both in the telecom room & the work area, & offer twice the port density of traditional SC & ST fibre connectors. The LC connector with its RJ-style latch clip design is easy to engage & disengage, & gives each connection greater durability in resisting pulls, strains, snags, & impacts during cabling installs & maintenance. The SC connector features a push-pull locking system. The LSZH jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Each cable is 100% optically inspected & tested for insertion loss before you receive it. A pull-proof jacket design surrounds the popular 62.5/125 multimode fibre, immune to electrical interference. ...

M1 adapters from C2G provide the flexibility to use a standard M1 display-cable to connect to a VGA projector. This M1 adapter will convert an M1 Male connector to a VGA HD15 Male connector. Its perfect for applications when an M1 cable cannot be changed to accommodate a VGA projector. ...

M1 adapters from C2G provide the flexibility to use a standard M1 display-cable to connect to a VGA projector. This M1 adapter will convert an M1 Male connector to a VGA HD15 Male connector. It's perfect for applications when an M1 cable cannot be changed to accommodate a VGA projector. ...