This SFP+ Transceiver Module is designed for use with HP network equipment & is equivalent to HP part number J9151A. This transceiver is built to meet or exceed the specifications of the OEM & to comply with Multi-Source Agreement (MSA) standards. This product is 100% functionally tested, & compatibility is guaranteed. The transceiver is hot-swappable input/output device which allows a 10 Gigabit Ethernet port to link with a Fibre optic network. OEM specific configuration data is loaded on to the EEPROM of the transceiver at the factory, allowing this transceiver to initialize & perform identically to an OEM transceiver. This transceiver may be mixed & deployed with other OEM or third party transceivers & will deliver seamless network performance. A list of compatible network equipment is available on the Specs tab of this page. HP & the HP logo are trademarks or registered trademarks of Hewlett-Packard Development Company, L.P.. This product is not certified or endorsed by Hewlett-Packard. ...

This SFP (mini-GBIC) Transceiver Module is designed for use with HP network equipment & is equivalent to HP part number JD089B. This transceiver is built to meet or exceed the specifications of the OEM & to comply with Multi-Source Agreement (MSA) standards. This product is 100% functionally tested, & compatibility is guaranteed. The transceiver is hot-swappable input/output device which allows a Gigabit Ethernet port to link with a copper network. OEM specific configuration data is loaded on to the EEPROM of the transceiver at the factory, allowing this transceiver to initialize & perform identically to an OEM transceiver. This transceiver may be mixed & deployed with other OEM or third party transceivers & will deliver seamless network performance. A list of compatible network equipment is available on the Specs tab of this page. HP & the HP logo are trademarks or registered trademarks of Hewlett-Packard Development Company, L.P.. This product is not certified or endorsed by Hewlett-Packard. ...

This SFP+ Transceiver Module is designed for use with HP network equipment & is equivalent to HP part number JD092B. This transceiver is built to meet or exceed the specifications of the OEM & to comply with Multi-Source Agreement (MSA) standards. This product is 100% functionally tested, & compatibility is guaranteed. The transceiver is hot-swappable input/output device which allows a 10 Gigabit Ethernet port to link with a Fibre optic network. OEM specific configuration data is loaded on to the EEPROM of the transceiver at the factory, allowing this transceiver to initialize & perform identically to an OEM transceiver. This transceiver may be mixed & deployed with other OEM or third party transceivers & will deliver seamless network performance. A list of compatible network equipment is available on the Specs tab of this page. HP & the HP logo are trademarks or registered trademarks of Hewlett-Packard Development Company, L.P.. This product is not certified or endorsed by Hewlett-Packard. ...

This SFP+ Transceiver Module is designed for use with HP network equipment & is equivalent to HP part number JD094B. This transceiver is built to meet or exceed the specifications of the OEM & to comply with Multi-Source Agreement (MSA) standards. This product is 100% functionally tested, & compatibility is guaranteed. The transceiver is hot-swappable input/output device which allows a 10 Gigabit Ethernet port to link with a Fibre optic network. OEM specific configuration data is loaded on to the EEPROM of the transceiver at the factory, allowing this transceiver to initialize & perform identically to an OEM transceiver. This transceiver may be mixed & deployed with other OEM or third party transceivers & will deliver seamless network performance. A list of compatible network equipment is available on the Specs tab of this page. HP & the HP logo are trademarks or registered trademarks of Hewlett-Packard Development Company, L.P.. This product is not certified or endorsed by Hewlett-Packard. ...

This SFP (mini-GBIC) Transceiver Module is designed for use with HP network equipment & is equivalent to HP part number JD118B. This transceiver is built to meet or exceed the specifications of the OEM & to comply with Multi-Source Agreement (MSA) standards. This product is 100% functionally tested, & compatibility is guaranteed. The transceiver is hot-swappable input/output device which allows a Gigabit Ethernet port to link with a Fibre optic network. OEM specific configuration data is loaded on to the EEPROM of the transceiver at the factory, allowing this transceiver to initialize & perform identically to an OEM transceiver. This transceiver may be mixed & deployed with other OEM or third party transceivers & will deliver seamless network performance. A list of compatible network equipment is available on the Specs tab of this page. HP & the HP logo are trademarks or registered trademarks of Hewlett-Packard Development Company, L.P.. This product is not certified or endorsed by Hewlett-Packard. ...

This SFP (mini-GBIC) Transceiver Module is designed for use with HP network equipment & is equivalent to HP part number JD493A. This transceiver is built to meet or exceed the specifications of the OEM & to comply with Multi-Source Agreement (MSA) standards. This product is 100% functionally tested, & compatibility is guaranteed. The transceiver is hot-swappable input/output device which allows a Gigabit Ethernet port to link with a Fibre optic network. OEM specific configuration data is loaded on to the EEPROM of the transceiver at the factory, allowing this transceiver to initialize & perform identically to an OEM transceiver. This transceiver may be mixed & deployed with other OEM or third party transceivers & will deliver seamless network performance. A list of compatible network equipment is available on the Specs tab of this page. HP & the HP logo are trademarks or registered trademarks of Hewlett-Packard Development Company, L.P.. This product is not certified or endorsed by Hewlett-Packard. ...

This Fire Wire adapter from C2G converts a 6-pin male connector to a 4-pin connector. It is ideal to be used with notebooks & other systems with a 4-pin Fire Wire port. Provides the quality you need to achieve high-speed performance you expect from your IEEE-1394 devices. ...

Does your entertainment system have wooden doors, or would you like to mount your components in a closet? Without a clear line of sight, infrared (IR) signals from a remote control will not reach the equipment. The remote control repeater kit contains all equipment necessary to remotely operate 4 components using your standard remotes. Mount the IR receiver in a central location & connect to the IR distribution block. This block repeats the signals through emitters to your electronic components. Your components may now be mounted in your entertainment center, closet or another room! The kit is self-contained & easy to connect. With this kit, you may mount a receiver in a convenient place on or near your entertainment system. The receivers cable is attached to the repeater system that is mounted in your entertainment cabinet. The kit

Includes:: 4 emitters. These emitters are connected from the repeater system & placed over the IR receiver of the equipment. The IR receiver & IR repeater have blinking blue LEDs to confirm receipt of the IR signal; the IR repeater is designed for mounting on shelf or wall. You can use your existing remotes for simple installation & hookups.

...

Does your entertainment system have wooden doors, or would you like to mount your components in a closet? Without a clear line of sight, infrared (IR) signals from a remote control will not reach the equipment. The remote control repeater kit contains all equipment necessary to remotely operate 4 components using your standard remotes. Mount the IR receiver in a central location & connect to the IR distribution block. This block repeats the signals through emitters to your electronic components. Your components may now be mounted in your entertainment center, closet or another room! The kit is self-contained & easy to connect. With this kit, you may mount a receiver in a convenient place on or near your entertainment system. The receiver's cable is attached to the repeater system that is mounted in your entertainment cabinet. The kit

Includes:: 4 emitters. These emitters are connected from the repeater system & placed over the IR receiver of the equipment. The IR receiver & IR repeater have blinking blue LEDs to confirm receipt of the IR signal; the IR repeater is designed for mounting on shelf or wall. You can use your existing remotes for simple installation & hookups.

...

Y power splitters from C2G easily attach additional hard drives, CD-ROMs, tape drivers, fans & CD-RWs to your computer's power supply. These cables meet or exceed industry standards. ...