This device must be installed by a competent person, in accordance with the current edition of the IET Wiring Regulations (BS7671) & Building Regulations. Please read these instructions carefully before commencing with installation. Failure to install correctly will negate the product warranty. The Dual Power Socket with Dual USB (Universal Serial Bus) Outlet means that you can charge / power 2x USB (Universal Serial Bus) devices & 2 other electrical items from one double wall plate. The USB (Universal Serial Bus) charging sockets are compatible with items such as smart phones, tablets & other devices that require charging via a USB (Universal Serial Bus) port. The USB (Universal Serial Bus) charging sockets have a total output of 2 amps (combined); if the current exceeds this it will automatically shut down to protect your device. This dual switched socket will fit any standard dual 25mm deep wall box. ** Instructions**
- Firstly, ensure you isolate the mains power supply & remove the fuse in the fuse box or switch off the circuit breaker in the consumer unit.
- Following the diagram over-leaf pass the cable through the entry holes & connect to the appropriate terminal.
- If an Earth loop connection is required, use the additional earth terminal block located in the back box.
- Re-connect the mains supply when the installation is correctly completed.
- Before use we recommend that a socket test is carried out.
- DO NOT MEGGER TEST
- this will damage the USB (Universal Serial Bus) charging circuit. ** Specifications**
- Working voltage: 13A, 250V
- Working temperature -15 to 40 C
- USB (Universal Serial Bus) Output: 2A, 5V
- UK 3 pin socket output: 13A, 250V
- Fits any standard back box (minimum depth of 25mm) ** Safety Information**
- We recommend using a competent person for installation.
- Only suitable for indoor installations.
- Before carrying out any electrical work, isolate the mains power supply & refer to the fitting instructions.
- For safe installation & connection ensure that the earth is connected.
- Wire/wiring colours are in accordance with the curr
















...

The Dual Power Socket with Dual USB (Universal Serial Bus) Outlet means that you can charge / power 2x USB (Universal Serial Bus) devices & 2 other electrical items from one double wall plate. The USB (Universal Serial Bus) charging sockets are compatible with items such as smart phones, tablets & other devices that require charging via a USB (Universal Serial Bus) port. The USB (Universal Serial Bus) charging sockets have a total output of 2 amps (combined); if the current exceeds this it will automatically shut down to protect your device. This dual switched socket will fit any standard dual 25mm deep wall box. This device must be installed by a competent person, in accordance with the current edition of the IET Wiring Regulations (BS7671) & Building Regulations. Please read these instructions carefully before commencing with installation. Failure to install correctly will negate the product warranty. ** Instructions**
- Firstly, ensure you isolate the mains power supply & remove the fuse in the fuse box or switch off the circuit breaker in the consumer unit.
- Following the diagram over-leaf pass the cable through the entry holes & connect to the appropriate terminal.
- If an Earth loop connection is required, use the additional earth terminal block located in the back box.
- Re-connect the mains supply when the installation is correctly completed.
- Before use we recommend that a socket test is carried out.
- DO NOT MEGGER TEST
- this will damage the USB (Universal Serial Bus) charging circuit. ** Specifications**
- Working voltage: 13A, 250V
- Working temperature -15 to 40 C
- USB (Universal Serial Bus) Output: 2A, 5V
- UK 3 pin socket output: 13A, 250V
- Brushed Chrome
- Fits any standard back box (minimum depth of 25mm) ** Safety Information**
- We recommend using a competent person for installation.
- Only suitable for indoor installations.
- Before carrying out any electrical work, isolate the mains power supply & refer to the fitting instructions.
- For safe installation & connection ensure that the earth is connected.
- Wire/wiring colours are in accordance

















...

The Xpeed 3007 Combat Helicopter Twin Pack takes flying model helicopters to a new level. Now you can use you skill at flying to fight with an opponent & challenge your friends to a duel of supremacy in the air! Each helicopter is armed with a laser & the object of the challenge is to hit your opponents helicopter three times to disarm it. Once your foe is hit, their helicopter will spin out of control & hit the floor. Each controller comes with sound effects. Do not confuse these battle copters with its less advanced 2 channel rivals, the XP3007 has full 3 channel flight. Great fun, & a real challenge. The Ultimate Stocking Filler! ** Technical Data:** Control Distance: 8m Battery Type: 3.7V 85m Ah Li-Po Flying Time: 7min Charging Time: 30-45min Charging Mode: Charged by controller ** Package Contents:** Helicopter Controller Spare Tail Blade Instruction Manual ...

Flexible, long life span, energy saving, environmentally friendly, low input voltage & colourful light. LED flexible strips colours, ease of control & excellent performance make this strip a fantastic choice to be used in a wide range of areas. IP65 rated with a 3M adhesive back, this strip can add light & colour in a multitude of rooms & even outside. Comes complete in a retail pack with 5m strip, control unit & 12v power adaptor. ** Features**
- Strip Length: 5m
- LED Count: 60 LEDs/m
- Light Output (max): 378 Lumens/m
- Beam Angle: 120 degrees
- Power Usage: 14.4W/m
- Working Temperature: -20 to +45 degrees C
- IP Specification: IP65






...

Flexible, long life span, energy saving, environmentally friendly, low input voltage & colourful light. LED flexible strip's colours, ease of control & excellent performance make this strip a fantastic choice to be used in a wide range of areas. IP65 rated with a 3M adhesive back, this strip can add light & colour in a multitude of rooms & even outside. Comes complete in a retail pack with 5m strip, control unit & 12v power adaptor. ** Features**
- Strip Length: 5m
- LED Count: 60 LEDs/m
- Light Output (max): 378 Lumens/m
- Beam Angle: 120 degrees
- Power Usage: 14.4W/m
- Working Temperature: -20 to +45 degrees C
- IP Specification: IP65






...

The P106 AV Homeplug twin pack is the latest version of the award winning Billion P104
- " Consistently high speeds & an intelligent
...

The P106 AV Homeplug twin pack is the latest version of the award winning Billion P104
- " Consistently high speeds & an intelligent
...

The P108 AV 500 Mbps Homeplug twin pack is the new superfast powerline starter kit from Billion with Gigabit Ethernet. The mini size adapters create a smaller footprint whilst still offering super fast homeplug networking with the new generation powerline AV technology that allows speeds of up to 500 Mbps through your existing mains power supply network. Simply plug in the Billion 2075 adaptors & connect via the gigabit ethernet port to a PC, games console, router or set-top box. Unique interchangeable sockets are included to enable the homeplug to be placed away from obstructions, such as skirting boards or shelving, by rotating the unit around 180°. As well as being Homeplug AV & IEEE 1901 compliant, the Billion adapters are also compliant with the European Unions Energy-using Products (Eu P) Directive & the European Code of Conduct (Co C) on Energy Efficiency. In addition the homeplug adaptor will go into "sleep" mode when not being used, offering a power saving of 80% with power output less than 1W. The P108 comes in a handy twin pack with 2 x 2075 homeplug adaptors. **
Features:** * Network PCs in the home or office through existing AC powerlines * 500 Mbps transmission rate, mini size for smaller footprint * Reversible clips
- unit can be rotated 180 degrees to avoid obstructions * 60% power saving mode when idle * Ideal for digital home, IPTV or Triple Play applications * Compliant with Homeplug AV

...

The P108 AV 500 Mbps Homeplug twin pack is the new superfast powerline starter kit from Billion with Gigabit Ethernet. The mini size adapters create a smaller footprint whilst still offering super fast homeplug networking with the new generation powerline AV technology that allows speeds of up to 500 Mbps through your existing mains power supply network. Simply plug in the Billion 2075 adaptors & connect via the gigabit ethernet port to a PC, games console, router or set-top box. Unique interchangeable sockets are included to enable the homeplug to be placed away from obstructions, such as skirting boards or shelving, by rotating the unit around 180°. As well as being Homeplug AV & IEEE 1901 compliant, the Billion adapters are also compliant with the European Union's Energy-using Products (Eu P) Directive & the European Code of Conduct (Co C) on Energy Efficiency. In addition the homeplug adaptor will go into "sleep" mode when not being used, offering a power saving of 80% with power output less than 1W. The P108 comes in a handy twin pack with 2 x 2075 homeplug adaptors. **
Features:** * Network PCs in the home or office through existing AC powerlines * 500 Mbps transmission rate, mini size for smaller footprint * Reversible clips
- unit can be rotated 180 degrees to avoid obstructions * 60% power saving mode when idle * Ideal for digital home, IPTV or Triple Play applications * Compliant with Homeplug AV

...

A high-quality 4-port wired VPN bridge/router that supports the worldwide SHDSL standard for symmetric rates up to 2.3 Mbps (2-wire). Incorporating a business-class firewall, embedded VPN protocols & Billions renowned built-in Quality of Service (Qo S) feature, this an ideal model for the business user. **
Features:** * High-speed internet access with SHDSL * Support Symmetric Data Rate of up to 2.3 Mbps (2-wire) * Supports Virtual Private Network (VPN) & Qo S * Integrated 4-port Ethernet Switch
...