. A twin pack comprises of a Quooker hot & cold mixer tap with a square spout & a matching boiling tap with a square spout. A 3 litre PRO3 tank is included & is suitable for most households. It fits neatly under the kitchen sink to provide 100°C boiling water to the boiling water tap in an instant. The patented high-vacuumed insulated tank keeps water at a constant temperature & prevents heat loss to save energy. The mixer tap is easily distinguishable from the boiling tap with a single lever to control hot & cold water. The boiling water tap has a childproof push-&-turn handle crenulated for grip & recognition & a red ring will light up when boiling water is being dispensed & when the tank is heating up. Other features of the boiling tap include an insulated spout to ensure it is not too hot to touch & the boiling water comes out as a fine spray to prevent burns & splashing. The tap is height adjustable & can be turned 360°. Choose from two quality finishes to match the design of your kitchen; brushed chrome or polished chrome. Features Chrome Finish Boiling Tap plus matching hot & cold mixer tap A fine spray of boiling water is dispensed to prevent burn Insulation ensures the spout is not too hot to touch Childproof double push & turn handle crenulated for recognition & extra grip Square spouts 360 degree radius Comes with 3 litre tank & the installation kit Spout can be turned 360° When on stanby a Quooker costs 3 pence a day No more waiting around for an overfilled kettle to boil
- Saving time & energy A red light ring which comes on when boiling water is dispensed or when the tank is heating up Can Qookers be installed in any kitchen?. Quookers can be fitted into new kitchens & also retrofitted into existing ones. To install a Quooker all that is required is space for the tank a 13 amp power socket access to waste pipe & a cold water supply underneath the work surface within 500mm. A minimum incoming cold water pressure of 2 bar is required. Space requirements The Quooker PRO3 tank requires 400mm of height space & is 150mm in diameter. The Quooker PRO3E tank requires 450mm of height space & is 150mm in diameter. The Quooker PRO7 & Combi 2.2 tanks require 470mm of height space & are 200mm in diameter. The Quooker PRO7E & Combi 2.2E tanks require 520mm of height space & are 200mm in diameter Does Quooker provide filtered cold water?. The Cold Water Filter has been designed to allow you to quickly switch from tap water to cold filtered water. Any new Fusion or Flex will now be able to supply cold filtered water via a single push & turn which when engaged will light the tap ring blue. The water passes through an activated-carbon filter which ensures the water tastes & smells better How to isolate the Quooker from the water supply. If you need to shut off the water supply to your Quooker press the Q shaped button on top of the tank to switch the tank off then run the boiling water tap until it runs cold. Next locate the Quooker's inlet combination/shut off valve (a brass valve between the tank & cold water supply) & turn the small grey knob to shut the water supply off. Please make sure the Quooker tap is not used & the tank is not switched back on while the water supply has been shut off What do the lights on my tank & tap mean?. When you first turn on the Quooker tank a solid red light with an occasional flicker should appear on the tank & tap. This means the tank is heating up. Once the tank has fully heated the light on the tap should disappear & the light on the tank should slowly fade in & out in a gentle pulse. We call this the tank’s “heartbeat” & it indicates the tank has fully heated & is ready to use. .