Simply Xtreme Glass Scratch Repair provides you with an easy and cost-effective way to remove light scratches & suface marks from glass. This kit contains full step-by-step instructions on how to repair your vehicles glass at a fraction of the cost of most repair outlets. Remove light scratches & suface marks from glass Easy & cost-effective Step by step instructions provided Kit Contents: Glass Scratch Repair Polishing Compound Polishing Backing Plate 2 Felt Polishing Pads Polishing Cloth Special Wet & Dry Paper Sponge Full Instructions ...

Simply Xtreme Tyre Inflator & Sealer provides you with an instant tyre repair without the need to even remove the wheel. It works deep inside the tyre to form a special sealing film which ensures an effective repair. The foam seals the puncture & inflates the flat tyre. You can drive immediately after filling the tyre. Check the tyre pressure as soon as possible at a service station. Deflate the tyre & then inflate to correct pressure. Xtreme Tyre Inflator & Sealer will not damage your tyre or wheel if applied correctly. It will not affect tyre tracking or alignment. It is advised that the tyre is professionally repaired or replaced when possible. Tyre sensor safe. Clean any residue off the tyre sensor. Usable on tyres with an inner tube. Tyre sensor safe Not water based which means it does not effect tracking Latex product that creates membrane inside tyre Works on all 18” & under vehicle tyres including 4x 4’s ...

Simply Xtreme Windscreen Chip Repair produces a finest top quality & professional repair using a patented syringe & resin procedure. This kit contains full instructions on how to repair your chipped windscreen at a fraction of the cost of most repair outlets. Easy yet finest top quality & professional repair Patented syringe & resin procedure Step by step instructions provided Kit Contents: 1 x Pit-Hole Pin 1 x Alcohol Pre-Wipe 1 x Adhesive Pedastal O-Ring 1 x Repair Pedestal 0.75ml x Resin 1 x dual action Syringe 1 x Mylar Curing Film 1 x Safety Blade Full Instructions ...

Ideal for light to medium assembly & general maintenance Rocking dog clutch mechanism for smooth power delivery Positive action trigger allows variable speed & output level Reverse Action
- one hand reverse button Single hammer for fast rundown & high torque build-up Rubber nose guard & band protects the housing for longer life Average Working Torque: 230ft/lbs (312 Nm) Speed: 8, 500 rpm Average Air Consumption: 4.5 CFM Air Inlet: 1/4" BSP Noise Level: 90 d B (A) Weight: 2.3kg
...

Ideal for all drilling, reaming, honing & hole sawing. Durable lightweight aluminium body Quality 3/8” Key Type Chuck Side mounted forward/reverse lever
- for one handed operation Handle exhaust with built-in muffler
- to reduce noise & direct exhaust away from work Fully hardened planetary gearing
- for enhanced power & long tool Chuck Type/
Size: Key Chuck / 3/8" Speed: 1800 rpm Operating Pressure: 90 Psi (6.3 bar) Air Consumption: 3.7CFM (106 ltr/min) Air Inlet: 1/4" Bsp Sound Pressure: 86.5 d B (A) Sound Power: 97.5d B (A) Vibration: 1.2m/s 2



...

A 5 piece starter kit package of quality spray gun & air accessories
- the ideal kit for most trade & DIY applications SPRAY GUN
-

...

Ideal for body repair, muffler & exhaust work. Safety throttle lever to prevent accidental start ups Large motor for faster cutting Balanced for less vibration Uses standard single hole, saw blades Anti vibration cover for operator comfort Low noice level Adjustable blade guide to increase blade life Speed: 10, 000 rpm Operating Pressure: 90psi (6.2 bar) Air consumption: 6.0 CFM Air Inlet: 1/4" BSP Noise Level: 81 d B (A) Vibration: 24.1 m/s 2 Weight 0.64kg ...

V-Twin Pump for optimum efficiency & performance 13CFM piston displacement 8 bar maximum pressure 50 litre air receiver ‘V-Twin’ pump for optimum efficiency & performance Efficient cooling system External air filters for easy access Wheel mounted for enhanced manoeuvrability Oil lubricated Supply: 230v (13amp) Air Receiver

Size: 50 litres Motor: 3hp (2.2kw) Piston Displacement: 13 CFM (368 litres/min) Max. Free Air Delivery (F.A.D.): 7.5 CFM (212 litres/min) Max. Pressure: 116psi (8.0bar) Weight: 45kg Packaged Dimensions: 740 x 390 x 760mm

...

8 bar maximum pressure 8 CFM piston displacement Wheel mounted for easy manoeuvrability Spply: 230v (13amp) Air Receiver



...

2hp (1.5k W) motor 8 CFM piston displacement 25 Litre Air Receiver Size Wheel mounted for enhanced manoeuvrability Supply: 230v (13amp) Air Receiver

Size: 25 litres Motor: 2.0hp (1.5kw) Piston Displacement: 8.0 CFM (226 litres/min) Max. Free Air Delivery (F.A.D): 5.3 CFM (150 litres/min) Max. Pressure: 116psi (8.0 bar) Noise Level: 94d B (A) Weight: 22kg Packaged

Dimensions (Hx Wx L): 580 x 260 x 565mm



...