More From Contributor

£19.50
Compatible only with heavy-duty coupling bodies. Flow rate at 6bar (2200ltr/min) @ 0.5bar p.d. Manufactured in the UK. High Flow Rate
- 130cfm at 100psi enhances tool efficiency. Hardened steel construction with corrosive resistant finish. Model No. AC81
...
Archived Product
£19.50
Compatible only with heavy-duty coupling bodies. Flow rate at 6bar (2200ltr/min) @ 0.5bar p.d. Manufactured in the UK. High Flow Rate
- 130cfm at 100psi enhances tool efficiency. Hardened steel construction with corrosive resistant finish. Model No. AC80
...
Archived Product
£25.74
Fast & efficient detection of tell-tale crash & panel damage including thick paint layers, filler & deep rust. Three coloured LEDs indicate condition of paint thickness & presence of filler. Ideal for dealerships & used car operations. Powered by 3V battery (supplied). Not suitable for aluminium or plastic panels. Model No. CC101 ...
Archived Product
£81.54
Heavy-duty steel framework with powder coat paint finish. Easy rolling Ø60mm composite castor wheels with ball bearing swivel. Vinyl covered back & headrest. Headrest is adjustable for comfort. Size (L x W x H): 1020 x 430 x 100mm. Model No. SCR74 ...
Archived Product
£88.74
Heavy-duty steel framework with powder coat paint finish. Fitted with 6 x Ø60mm smooth rolling castors on ball bearing swivels. Ingenious split back design permits dual applications either as flat creeper or folded up as mechanic's seat. Supplied flat & takes only a few seconds to convert to seat
- no tools required.
Sizes: Creeper Mode (L x W x H); 1010 x 440 x 145mm, Seat Mode (L x W x H); 560 x 440 x 415mm. Model No. SCR78

...
Archived Product
£31.14
3mm Steel construction with safety insulated hand grips.
Features: - Crimps insulated terminals 0.5-6mm². - Crimps
...
Archived Product
£27.54
Crimping tool with insulated grips. Suitable for 1.5, 2.5 & 6mm² insulated terminals & 1.5, 2.5 & 4.5mm² non-insulated terminals. Also has cutting, 0.75-6mm² wire stripping & M2.6-M5 stud shearing facilities. Approximately 200 assorted terminals & connectors & 70 cable ties supplied, in plastic carry-case. Model No. AK8804 ...
Archived Product
£87.54
Clever device which quickly & safely overcomes the awkward job of lifting 4x 4 vehicles with offset differentials. Simply remove the existing trolley jack saddle*, replace with cross beam adaptor, fit the jack saddle into the hole in the adaptor & you are ready to lift. Suitable for jacks with a 31-33mm saddle spigot pin, including Model No's 3000CXD, 3000LQ, 3001LE, 3003CXQ, 3010CX & 3012CXD. * Note: Remove any rubber jack pad from the saddle before using to improve safety. ...
Archived Product
£61.74
Manufactured from hardened & tempered Chrome Molybdenum steel with a fully polished mirror finish. Suitable for use with extension bars & ratchet wrenches. Ideal for applications where access is limited.
Sizes: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm. Supplied on storage rail. Model No. AK5989
...
Archived Product
£107.94
Manufactured from hardened & tempered Chrome Molybdenum steel with a fully polished mirror finish. Suitable for use with extension bars & ratchet wrenches. Ideal for applications where access is limited.
Sizes: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24mm. Supplied in carry-case. Model No. AK59891
...
Archived Product

Sealey Creeper/Seat Steel With 7 Wheels & Adjustable Head Rest

Powder coated tubular steel construction with padded vinyl cushions. 5-Position head/back rest provides added comfort. Super-stable design with seven smooth-rolling Ø60mm ball bearing swivel castors. Supplied flat and converts to seat mode in seconds. Sizes: Creeper Mode (L x W x H); 1200 x 430 x 130mm, Seat Mode (L x W x H); 640 x 430 x 460mm. Model No. SCR79
RIP - This product is no longer available on our network. It was last seen on 20.01.2018

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • Availability: Out Of Stock
  • Supplier: Autosessive
  • SKU: 101560
Availability: In Stock
£106.14

Product Description

Powder coated tubular steel construction with padded vinyl cushions. 5-Position head/back rest provides added comfort. Super-stable design with seven smooth-rolling Ø60mm ball bearing swivel castors. Supplied flat & converts to seat mode in seconds.
Sizes: Creeper Mode (L x W x H); 1200 x 430 x 130mm, Seat Mode (L x W x H); 640 x 430 x 460mm. Model No. SCR79

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Steel - An alloy made predominately of Iron combined with <2% carbon
Vinyl - A type of material which falls under the board term of pastic
Comfort - something that feels nice to the user. Often relaxing.
Powder - a object formed from many tiny pieces.
Sealey - One of the UKs top suppliers of workshop tools and equipment with over 30 years experience.
Padded - Something with an extra cushion or boost.
Adjustable - Something that can be changed or slightly modified to fit.
Design - A drawing or styles that shows the look and functionality of something before its made.
Adjustable - Something that can be changed in order to fit better.
Head - The upper part of a body typically separated by the neck.
Model - A representation of a person or thing, usually smaller scale. It can also be a person that wears clothing.

Supplier Information

Autosessive
Page Updated: 2018-01-19 00:03:09

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu