Suitable for a variety of trade applications.
Heavy-duty alloy bevel gear head with composite body casing.
Heavy-duty 1000W motor develops powerful 11000rpm (no load speed).
Features spindle lock for fast loading/unloading of discs.
Supplied with side handle, guard & spanner.
BS approved non-rewirable plug with 3mtr power cable.
Grinding disc not included, order Model No. PTC/125G.
Model No. SG125 ...
Heavy-duty alloy bevel gear head with composite body housing a powerful 2000W motor.
Fitted with soft start to reduce mains draw when switched on.
Spindle lock device for fast loading/unloading of discs.
Supplied with side handle, guard & spanner.
BS approved non-rewirable plug with 3mtr power cable.
Grinding disc not included, order Model No. PTC/230G.
Model No. SG2303 ...
Angle grinder with alloy drive casing & composite motor housing.
Smooth running 860W motor & bevel gears give low operating noise & vibration.
Features an integral spindle lock for fast loading/unloading of grinding discs.
Slider type power control with power lock.
Supplied with side handle, guard & spanner.
Grinding disc not included.
Not intended for continuous professional use. ...
Suitable for a variety of trade applications.
Heavy-duty alloy bevel gear head with composite body casing.
Heavy-duty 900W motor develops powerful 11000rpm (no load speed).
Features spindle lock for fast loading/unloading of discs.
Supplied with side handle, guard & spanner.
BS Approved non-rewirable plug with 3mtr power cable.
Grinding disc not included. Order Model No. PTC/115G.
Model No. SG115 ...
Rugged & resilient digital torque wrench suitable for workshop & factory use.
LCD read-out with LED, vibration & audible alarms to indicate achieved & target torque levels.
Features angle mode, eliminating the need for angle gauges & protractors providing an accurate & fast way to measure torque plus angle tightening sequences.
Will also accumulate angle measurement when multiple turns are required, ideal to be used where access is limited.
Selectable track or peak modes & up to 5 user preset memories available.
Read-outs in Nm, lb.in, lb.ft, kgf.m or degrees.
Reversible Chrome Vanadium 72-tooth ratchet allows torque reading in either direction.
Accurate to ±2% between 10% & 100% of wrench’s stated capacity.
Length: 610mm.
Supplied with 4 x AAA batteries, test certificate & storage case.
Model No. STW306 ...
Designed to be used with any 1/2" Sq drive breaker bar.
Tough composite dial & rotating index line allow operator to accurately tighten fixing to manufacturer’s exact
Specification.
Supplied with fully adjustable reaction arm.
Essential measuring tool for the busy workshop.
Model No. VS530 ...
Designed to be used with 1/2" Sq drive breaker bar.
Steel dial & rotating index line allows operator to accurately tighten cylinder head bolts & other fixings to manufacturer's exact specifications.
Long reach flexi arm with clip end provides extra stability & precision.
Model No. VS431 ...
Extremely effective anti-spatter spray preventing spatter build-up on fixings, jigs & welding nozzles.
Contains rust inhibitor to prevent corrosion.
New innovative pressure spray system allows 99% of the active product to be expelled from the can.
Up to six times the life of normal aerosols.
Safe to use
Non-toxic
No acrid fumes
Cleaner, easier & tidier welding
Environmentally friendly
Recyclable tin ...
Suitable for both the DIY user & professional mechanic.
Purpose-made for the recovery of oil & antifreeze, the pan helps to keep the workshop floor free from oily residue & aid return of oil to recycling containers with minimum risk of spills or splashes.
Suitable for parts cleaning operations with emulsifiable solvents such as Sealey Model No's. AK25 & AK2501.
Check the Features:
Made from high-density polyethylene with UV stabiliser.
Heavy-wall construction stays rigid, even with hot oil.
Excess capacity helps prevent overflow or spillage.
Large handles, featured on Model No's. DRP02-DRP05, are positioned to aid carrying & pouring.
Resistant to most chemicals & solvents*.
Will not dent or rust & are easy to clean.
* Not suitable for spray gun cleaner
Model No: DRP04
Colour-coded version of DRP03 helps keep different fluids isolated & reduces cross contamination.
Suitable for multiple oil changes. Features anti-splash lip that contains fluid when carrying or pouring. Large handles & enclosed pouring spout makes easy work of returning oil/fluid to recycling container. ...
Welding Current: 45-140A.
Electrode Capacity: Ø1.6-3.2mm.
Manufactured to exacting standards this model meets all relevant CE requirements.
Fitted with a forced air cooling system, this welder has increased duty cycle & performance.
Features a single, vented, wrap-around shell fitted to a heavy-duty chassis.
Screw type, stepless welding control allows fine adjustment of current.
Fitted with carry handle.
Supplied with accessory kit including electrode holder, cables, earth clamp & chipping hammer/wire brush.
Model No. 140XT ...
Archived Product
Sealey Angled Prybar Set 4pc Heavy-Duty
Heavy-duty, angled shafts, manufactured from high quality Chrome Vanadium steel with satin polished finish.
Each prybar fitted with textured comfort grip handle and hammer cap.
Contents: 205, 310, 460, 610mm.
Supplied in storage tray.
Model No. AK9141
RIP - This product is no longer available on our network. It was last seen on 20.01.2018
This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.
Use our search facility to see if it is available from an alternative contributor.
Heavy-duty, angled shafts, manufactured from high quality Chrome Vanadium steel with satin polished finish.
Each prybar fitted with textured comfort grip handle & hammer cap.
Contents: 205, 310, 460, 610mm.
Supplied in storage tray.
Model No. AK9141
Reviews/Comments
Add New
Intelligent Comparison
Oooops! We couldn't find anything! Perhaps this product's unique.... Or perhaps we are still looking for comparisons! Click to bump this page and we'll hurry up.
Price History
Oooops! We couldn't find any historical pricing!
Vouchers
No voucher codes found. Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Facebook
Jargon Buster
Steel - An alloy made predominately of Iron combined with <2% carbon
Satin - A weaving technique which provides a glossy surface and dull back
Chrome - A shiney metalic finish where chromium is electroplated onto an object
Chrome - A shiney bright metalic coating of chromium applied to metals
Hammer - A tool used for providing impact to an object such as a nail
heavy - A concept of weight indicating an item may require some effort to lift or move
polished - A process that makes and object or surface shiny. A refined and flawless finish.
Quality - An object that has quality is superior in function and finish than a less quality object.
Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.
Comfort - something that feels nice to the user. Often relaxing.
Sealey - One of the UKs top suppliers of workshop tools and equipment with over 30 years experience.
Model - A representation of a person or thing, usually smaller scale. It can also be a person that wears clothing.
Supplier Information
Autosessive
Page Updated: 2018-01-19 00:03:09
Community Generated Product Tags
Oh No! The productWIKI community hasn't generated any tags for this product yet!