United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Car Accessories>Workshop & Garage Tools>Tyre Bay>Tyre Repair Tools
Available
-
Forged Chrome Molybdenum
steel 1/2"Sq drive
sockets for removal of
wheel locking nuts. May
also be used on fixings
too damaged or corroded
for standard
sockets. Suitable for
use with impact
wrenches. Sizes: 17,
18.5, 20, 21.5, 23,
24.5, 26mm. Supplied in
tough composite storage
case. Model No. SX202
Availability: In Stock
£67.74
Available
-
Power of a breaker bar
and speed of a wheel
brace. Adjustable lever
locks in three positions
- either end for maximum
power and in the middle
for maximum speed when
spinning off
fixing. Includes two
Chrome Vanadium flip
sockets to suit popular
wheel nut sizes. Socket
Sizes: 17 & 19, 21 &
23mm. Lever Bar Length:
400mm. Supplied in
convenient storage
pouch. Model No. AK2094
Availability: In Stock
£33.54
Available
-
Updated version of
optical system uses low
radiation laser beam to
indicate toe-in or
toe-out. Single leg
configuration and
reversible contact probes
allow on-ramp use. Works
on practically all cars
and light commercials
with rim diameters from
200 to 600mm. Powered by
2 x AA batteries and
includes operating
instructions.
Availability: In Stock
£815.94
Available
-
Professional motorcycle
wheel balancer. Suitable
for most motorcycle
wheels. Includes two
cones and spindle for
precise, easy alignment
and balancing. Uses
gravity to find the heavy
point of a wheel and
tyre. Maximum Cone Size:
Ø35mm. Centre Spindle
to Base: 400mm. Model
No. VS1819
Availability: In Stock
£113.94
Available
-
Complete selection of
tools for replacing the
service pack on snap-in
and clamp-in TPMS sensors
which is recommended each
time a tyre is
changed. Essential tool
for making sure the
screws, valve core and
nut are torqued to the
manufacturer's
specifications. Features
a grommet tool which is
used for the
removal/installation from
the TPMS stem without
damaging the
grommet. Contents:
Torque Screwdriver,
Torque Limited Tyre Valve
Tool 4lb.in(0.45Nm),
Grommet
Removal/Installation
Tool, 1/4"Sq Drive
Sockets; 11, 12mm,
TRX-Star* - T10, T15,
T20, Bit
Holder. Min./Max.
Screwdriver Torque:
1/9Nm. Supplied with
calibration certificate
for torque
screwdriver. Model No.
TSTKIT
Availability: In Stock
£71.94
Available
-
Used to check and adjust
the alignment of the
lasers on Model No. GA70
Four-Wheel Laser
Aligner. This unit will
allow workshops to check
and adjust
in-house. Laser heads
secure to the rig and
rest on the bobbins that
contact the vehicle’s
wheel rim. Supplied with
comprehensive
instructions. Model No.
GA70CR
Availability: In Stock
£503.94
Available
-
Suitable for changing
tyres with small rim
diameters commonly found
on agricultural, leisure
and industrial vehicles
such as ATVs, golf
buggies, mowers, garden
tractors and handling
equipment. Mount
directly onto work
surface. Supplied with
tyre bar and alignment
cone. Model No. TC967
Availability: In Stock
£112.74
Available
-
Manual type tyre changer
suitable for wide variety
of tyres and wheels
including those fitted to
motorcycles, quad bikes,
go-karts and golf
buggies. Works on
bearing or hub centred
wheels and supplied with
two centre
posts. Min./Max. Wheel
Size:
102/524mm. Includes
manual bead breaker and
is supplied with tyre bar
for mounting and
de-mounting. Fast and
simple
operation. Supplied with
operating
instructions. To prevent
damage to the rims of the
alloy wheel, it is
essential to use an
appropriate tyre
bar. Model No. TC965
Availability: In Stock
£198.00
Available
-
Steel and cast aluminium
construction. Measures
toe-in and toe-out by
contact with wheel rims
and optical sight
alignment markers. Works
on practically all cars
and light commercial
vehicles with rim
diameters between 200 and
600mm. Some assembly
required prior to
use. Operating
instructions included.
Availability: In Stock
£719.94
Available
-
Composite body with
backlit LCD digital
display and rubber
protector. Select
between bar, psi,
kg/cm² or kPa. Maximum
Air Supply:
150psi. Inlet Size:
1/4"BSP. Supplied with
200mm rubber hose and
twin push-on
connector. Powered by 2
x CR2032 batteries
(supplied). Model No.
SA393
Availability: In Stock
£82.74
Available
-
Hardened and tempered
stainless steel
gauge. 11mm High figures
in LCD display for ease
of reading. Metric and
Imperial calibration with
conversion between the
two. Zero setting
control allows for
comparative
measurement. Pin type
tread-probe. Supplied
with calibration
certificate and storage
case. Range:
0-25mm(0-1"). Battery:
SR44 - 1.5V. Model No.
VS0565
Availability: In Stock
£59.94
Available
-
Composite body with
backlit LCD digital
display and rubber
protector. Select
between bar, psi,
kg/cm² or kPa. Maximum
Air Supply:
150psi. Inlet Size:
1/4"BSP. Supplied with
300mm rubber hose and
clip-on
connector. Powered by 2
x CR2032 batteries
(supplied). Model No.
SA392
Availability: In Stock
£80.34
Available
-
Range: 0.34-12bar
(5-170psi,
34-1200kPa). Composite
body with backlit LCD
digital display and
rubber
protector. Features a
1.8mtr rubber hose with
clip-on connector, auto
power off and battery
level indicator. Easy to
use hand trigger to
inflate and thumb control
button to
deflate. Supplied with
calibration
certificate. Model No.
SA394
Availability: In Stock
£100.14
Available
-
Robust composite body
with backlit LCD digital
display. Calibrated in
bar, psi, kg/cm² or
kPa. Range: 0-255psi
(0-18bar). Features
built-in LED work light
for use in low visibility
areas, auto power off
(to preserve battery
life) and low battery
indicator. Supplied with
350mm rubber hose and
clip-on connector.
Powered by 2 x AAA
batteries (supplied).
Model No. SA391
Availability: In Stock
£101.94
Available
-
30” length
Ideal for
knocking wheels off that
have seized to the hub
– does not damage the
alloy wheels Filled with
lead shot that absorbs
the shock of the impact
– does not rebound Soft
face – Polyether
Urethane
material” Warranty: Limited
Availability: In Stock
£55.14
Available
-
Manufactured to comply
with 86/217/EEC Measuring
Instruments
Directive. Extruded
aluminium body with large
rubber bumper. Linear
pressure scale, dual
calibrated in psi and
bar, with parallax
correction. 300mm
Flexible hose fitted with
240mm, twin push-on,
air connector. Supplied
with a serial numbered
calibration certificate.
Availability: In Stock
£95.94
Available
-
Push-on type tyre
pressure gauge with 8mm
digit LCD display
calibrated in
psi. Scale:
0-100psi. Memory hold
feature with pressure
release valve. Single
lithium battery will run
approximately 4000 test
cycles. Auto-off
function with low battery
indication. Model No.
TST/PG981
Availability: In Stock
£37.14
Available
-
Push-on type tyre
pressure gauge with 8mm
digit, easy read, LCD
display calibrated in
psi. Pressure release
valve. Single lithium
battery will run
approximately 4000 test
cycles. Auto-off
function with low battery
indication. Swivel head
rigid type with push-on
chuck.
Availability: In Stock
£32.34
Available
-
Robust alloy construction
with accuracy of
±1%. Manufactured to EN
837-1/6 and supplied with
twin connector and
extended
handle. Rotating bezel
ensures accuracy of gauge
reading. Made in
Germany. Scale
0-10bar/0-140psi. Suitable
for testing car and twin
wheeled commercial
vehicle tyre pressures as
well as water filled
tyres. Model No. TST/PG2
Availability: In Stock
£86.94
Available
-
The next generation of
bead blaster which
produces a huge punch
despite its
size. Delivers an
instantaneous blast of
air. Dumps air into tyre
void forcing bead to seat
against rim for
inflation. Fully
certified tank with
gauge, safety valve that
prevents over
pressurising. Push
button trigger that
allows the technician to
keep both hands on the
tank for more
control. Suitable for
use on cars, light
commercials and ATV
tyres. Supplied with
safety spectacles, ear
plugs and wall mounting
bracket. Model No. TC903
Availability: In Stock
£347.94
Available
-
RE-CALIBRATION SERVICE:
We offer a competitively
priced calibration
service and recommend the
unit is returned to us if
the unit becomes damaged
or re-calibration is
required. A test
certificate can be issued
at this point. Contact
our technical help line
for further information
on 01284 757505
and quote Model No.
GA70CAL. Model No.
GA70CAL
Availability: In Stock
£89.94
Available
-
Manufactured to comply
with EU Directive
86/217. Extruded
aluminium body with large
rubber bumper. Linear
pressure scale, dual
calibrated in psi and
bar. Fitted with 2.75mtr
hose with clip-on
connector for compliance
with safety regulations
relating to inflation of
commercial and
agricultural vehicle
tyres. Supplied with a
serial numbered
calibration certificate.
Availability: In Stock
£206.34
Available
-
Used for removal and
installation of the core
from a wheel
valve. Features
aluminium handle with
magnet and retainer
mounted in the head to
retain the valve
core. Suitable for
motorcycles, cars and
commercial
vehicles. Head Size:
Ø4.4mm. Model No. TST02
Availability: In Stock
£9.54
Available
-
Steel construction with
manual bead
breaker. Suitable for
use on most open centred
wheels. Working Ø
Minimum/Maximum:
325/460mm. Wheel Depth
Minimum/Maximum:
40/203mm. Supplied with
tyre bar. To prevent
damage to the rims of the
alloy wheel, it is
essential to use a TC963
Tyre Bar. Model No.
TC960
Availability: In Stock
£161.94
Available
-
Hardened and tempered
stainless steel
gauge. 11mm High figures
in LCD display for ease
of reading. Metric and
Imperial calibration with
conversion between the
two. Zero setting
control allows for
comparative
measurement. Supplied in
storage case.
Availability: In Stock
£41.94
Available
-
Ergonomically designed
lightweight tyre pressure
gauge. Single push
button operation with LCD
digital display. Range:
0-100psi/0-7bar. Read-out
available in bar, psi,
kg/cm² or kPa. Auto
power-off
feature. Includes 1 x
CR2032 battery. Model
No. TSTPG10
Availability: In Stock
£19.14
Available
-
Remove and install
leaking tyre valves
without having to remove
the tyre. Works on steel
wheels and especially
good for valves on
motorcycle or
agricultural
wheels. Time saving
tool. Contents: Cone,
Push/Pull Driver, Valve
Hook Tool, Tyre
Valve. Not suitable for
high pressure
valves. Model No. TSTVRK
Availability: In Stock
£15.54
Available
-
Used for the quick
removal of snap-in type
valves. Lever action
grips the valve stem to
pull the valve base
through the rim without
the need for cutting
off. Nylon housing and
roller reduces the risk
of damage so making the
tool suitable for both
steel and alloy
wheels. Vinyl grip
handle provides extra
comfort and
control. Model No. TST01
Availability: In Stock
£12.30
Available
-
Simplifies installation
of tyre valves in
tubeless wheels. Pulls
tyre valve assembly
through rim. Shank is
notched to accommodate
various rim
styles. Manufactured
from resilient nylon to
minimise damage and
marking to alloy
wheels. Features a valve
core removal tool mounted
in the base of the
handle. Length:
270mm. Model No. TST04
Availability: In Stock
£7.14
Available
-
Ergonomically designed,
robust, tyre pressure
gauge with integral tread
depth gauge. Rubber
grips fit comfortably in
the hand. Push-button
operation with backlit
LED display for tyre
pressure Read-out
available in bar, psi,
kg/cm² or kPa. Integral
tread depth gauge reads
up to 22mm. Auto
power-off. Batteries
supplied.
Availability: In Stock
£29.94
Available
-
Fast, simple and
accurate alignment of
both front and rear
wheels. Optimises
vehicle performance and
set up after installation
or modification of
steering or suspension
components. Simple and
fast to use, it is ideal
for the busy professional
workshop and has a fast
return on investment -
potentially adding value
to every steering or
suspension job. This
fully portable kit is
also ideal for track-day
set up for the
enthusiast. Works on
practically all cars and
light commercials with
rim diameters between
330mm(13") and
560mm(22"). Supplied
with steering wheel
clamp, wheel turn plates
and wheeled storage
rack. Supplied with
comprehensive operating
instructions. Model No.
GA70
Availability: In Stock
£1319.94
Available
-
Up-to-date kit for the
installation and removal
of front hub bearings
without the need to
dismantle the steering
knuckle and strut
assembly. Fast and
simple to use. Suitable
for most front wheel
drive cars. Heavy-duty
steel drifts with black
phosphate finish for
corrosion
resistance. May be used
with impact
wrench. Supplied in
carry-case. Model No.
VS7021
Availability: In Stock
£203.94
Available
-
Removes the plastic wheel
nut caps fitted to Audi,
Seat, Skoda,
Vauxhall/Opel and VW
vehicles. Eliminates the
need to lever off caps
with a screwdriver,
which may damage the
alloy wheel. Up to six
caps may be stored in the
handle, ready for
refitting. Model No.
VS930
Availability: In Stock
£11.94
Available
-
Use in conjunction with
Model No. GA42 Gauge Set
for accurate castor and
kingpin alignment. Also
measures toe-in/out and
full lock
angles. Locking pins
prevent rotation of table
whilst driving vehicle on
and ensure accurate
angular
measurements. Measures
up to 45º rotation in
either
direction. Maximum
loading 1360kg per
pair. Model No. GA44
Availability: In Stock
£431.94
Available
-
Comprehensive kit of
tools for the fast and
effective removal and
installation of wheel
bearings on front-wheel
drive vehicles. Reduces
chances of damage to hub
and bearing. Heavy-duty
steel drifts with
phosphate coating to
prevent
corrosion. Heavyweight
drive screw for use with
impact tools. Also
suitable for removing and
installing large
industrial
bearings. Supplied in
carry-case. Model No.
VS7020
Availability: In Stock
£239.94
Available
-
The easy and instant way
to seat tubeless tyre
beads. Dumps air into
tyre void forcing bead to
seat against rim for
inflation. Fully
certified tank with gauge
and safety valve prevents
over pressurising.
Suitable for use on
cars, commercials,
agricultural and ATV
tyres. Model No. TC900
Availability: In Stock
£239.94
Available
-
Forged and heat treated
Chrome Molybdenum steel
impact grade socket,
chemically blackened for
corrosion
resistance. Malleable
steel material makes the
socket suitable for use
with either hand ratchet
wrenches or air impact
wrenches. Model No.
SX010
Availability: In Stock
£23.93
Available
-
Chrome Molybdenum socket,
hardened, tempered and
anodised for corrosion
resistance. Suitable for
use with impact
tools. Six-point socket
is externally and
internally sleeved to
prevent damage to alloy
wheels and
nuts. Colour-coded for
easy size
selection. IMPORTANT
INFORMATION Alloy
wheel impact sockets have
an ultra-thin walled
design permitting a
limited torque
range. They are suitable
only for wheel nuts and
exempt from lifetime
warranty.
Availability: In Stock
£11.93
Available
-
Chrome Molybdenum socket,
hardened, tempered and
anodised for corrosion
resistance. Suitable for
use with impact
tools. Six-point socket
is externally and
internally sleeved to
prevent damage to alloy
wheels and
nuts. Colour-coded for
easy size
selection. IMPORTANT
INFORMATION Alloy
wheel impact sockets have
an ultra-thin walled
design permitting a
limited torque
range. They are suitable
only for wheel nuts and
exempt from lifetime
warranty.
Availability: In Stock
£13.43
Available
-
Chrome Molybdenum steel
sockets with 1/2"Sq
drive. Used with air
impact wrench running in
reverse, deep reverse
helix grips locking wheel
nut. Ideal for busy fast
fit operation. Removal
action will distort wheel
nut and replacement is
recommended. Wheel Nut
Compatibility: 19, 21,
22mm (Across
Flats). Model No. SX200
Availability: In Stock
£15.54
Available
-
Chrome Molybdenum
sockets, hardened,
tempered and anodised for
corrosion
resistance. Suitable for
use with impact
tools. Each six-point
socket is sleeved and has
an insert to prevent
damage to alloy wheels
and nuts. Colour-coded
sockets for easy size
selection. Comprises
standard 17, 19 and 21mm
sockets. Supplied in
storage
case. IMPORTANT
INFORMATION Alloy
wheel impact sockets have
an ultra-thin walled
design permitting a
limited torque
range. They are suitable
only for wheel nuts and
exempt from lifetime
warranty.
Availability: In Stock
£35.93
Available
-
Forged Chrome Molybdenum
steel 1/2"Sq drive
sockets for removal of
wheel locking nuts when
the key is not
available. Also useful
for removing
damaged/corroded
fixings. Phosphate
finish for resistance to
corrosion. Includes
drift to aid removal of
fixing from
socket. Suitable for use
with impact
wrenches. Sockets: 17,
19, 21, 22mm. Supplied
in storage case. Model
No. SX201
Availability: In Stock
£47.94
Denmark