245g/m, 7oz polyester/cotton material.
Concealed stud-fastening front.
Breast pocket with stud-fastening flap.
Two side swing pockets with trouser pocket access, in self-fabric for
extra durability.
Rule pocket on right leg.
Sizes Guide:
Regular (31" inside leg): S - XXL Height guide to 5'10"
Tall (33" inside leg): M - XXL Height guide over 5'11"
This listing is size XL, with a REG leg.
Anti-compression genuine double gel gives maximum cushioning for added comfort and manoeuvrability.
Hard wearing non-scratch pads for extended life.
Twin hook-and-loop straps offer a more comfortable fit and stops knee pads from slipping.
Model No. SSP63
65% polyester, 35% cotton, 260g/m.
Two-way metal zip-front with studded over-placket.
Two zipped chest pockets.
Two large back patch pockets, one zipped.
One rule pocket.
One tool pocket.
Two swing pockets with side access.
Double pencil pocket on sleeve.
Full back elastication and action back for ease of movement.
Sizes Available:
Regular (30" inside leg): 36" - 54"
Tall (32" inside leg): 42'' - 50''
This listing is for a 40" chest size with a REG leg.
65% polyester, 35% cotton, 260g/m.
Two-way metal zip-front with studded over-placket.
Two zipped chest pockets.
Two large back patch pockets, one zipped.
One rule pocket.
One tool pocket.
Two swing pockets with side access.
Double pencil pocket on sleeve.
Full back elastication and action back for ease of movement.
Sizes Available:
TALLular (30" inside leg): 36" - 54"
Tall (32" inside leg): 42'' - 50''
This listing is for a 38" chest size with a TALL leg.
65% polyester, 35% cotton, 260g/m.
Two-way metal zip-front with studded over-placket.
Two zipped chest pockets.
Two large back patch pockets, one zipped.
One rule pocket.
One tool pocket.
Two swing pockets with side access.
Double pencil pocket on sleeve.
Full back elastication and action back for ease of movement.
Sizes Available:
TALLular (30" inside leg): 36" - 54"
Tall (32" inside leg): 42'' - 50''
This listing is for a 42" chest size with a TALL leg.
65% polyester, 35% cotton, 260g/m.
Two-way metal zip-front with studded over-placket.
Two zipped chest pockets.
Two large back patch pockets, one zipped.
One rule pocket.
One tool pocket.
Two swing pockets with side access.
Double pencil pocket on sleeve.
Full back elastication and action back for ease of movement.
Sizes Available:
TALLular (30" inside leg): 36" - 54"
Tall (32" inside leg): 42'' - 50''
This listing is for a 36" chest size with a TALL leg.
65% polyester, 35% cotton, 260g/m.
Two-way metal zip-front with studded over-placket.
Two zipped chest pockets.
Two large back patch pockets, one zipped.
One rule pocket.
One tool pocket.
Two swing pockets with side access.
Double pencil pocket on sleeve.
Full back elastication and action back for ease of movement.
Sizes Available:
Regular (30" inside leg): 36" - 54"
Tall (32" inside leg): 42'' - 50''
This listing is for a 54" chest size with a REG leg.
65% polyester, 35% cotton, 260g/m.
Two-way metal zip-front with studded over-placket.
Two zipped chest pockets.
Two large back patch pockets, one zipped.
One rule pocket.
One tool pocket.
Two swing pockets with side access.
Double pencil pocket on sleeve.
Full back elastication and action back for ease of movement.
Sizes Available:
TALLular (30" inside leg): 36" - 54"
Tall (32" inside leg): 42'' - 50''
This listing is for a 54" chest size with a TALL leg.
65% polyester, 35% cotton, 260g/m.
Two-way metal zip-front with studded over-placket.
Two zipped chest pockets.
Two large back patch pockets, one zipped.
One rule pocket.
One tool pocket.
Two swing pockets with side access.
Double pencil pocket on sleeve.
Full back elastication and action back for ease of movement.
Sizes Available:
TALLular (30" inside leg): 36" - 54"
Tall (32" inside leg): 42'' - 50''
This listing is for a 52" chest size with a TALL leg.
Modern trainer design providing optimum safety for all of the workforce.
Black full-grain smooth leather upper
High-wicking Tybrelle lining for extra comfort
Dual-density PU sole
Anti-static
SRC Slip rated
200 joule EN ISO 20345
Size: 6
Modern trainer design providing optimum safety for all of the workforce.
Black full-grain smooth leather upper
High-wicking Tybrelle lining for extra comfort
Dual-density PU sole
Anti-static
SRC Slip rated
200 joule EN ISO 20345
Size: 11
GrimePro Orange is a unique fast acting powerful hand cleansing formula that
rapidly removes even the most stubborn ingrained oil, grease and grime.
Containing no harsh hydrocarbon solvents, GrimePro Orange is caring for skin
and kind to the environment
GrimePro Orange contains carefully selected skin care ingredients with
extract of glycerine to replenish the natural oils lost from the skin during
washing. Micro polymer beads create a gentle scrubbing action for enhanced
removal of grease and grime. A mild yet invigorating citrus orange fragrance
provides for a pleasurable washing experience that leaves the skin feeling
clean and fresh. The creamy lotion is easy to rinse off using either hot or
cold water and leaves no slimy residues.
This standard 2.5 litre GrimePro Cartridge is simple and quick to replace
with an easy screw on dispensing nozzle. This cartridge is compatible with the
dispensor found in the GrimePro Starter Kit
Modern trainer design providing optimum safety for all of the workforce.
Black full-grain smooth leather upper
High-wicking Tybrelle lining for extra comfort
Dual-density PU sole
Anti-static
SRC Slip rated
200 joule EN ISO 20345
Size: 10
65% polyester, 35% cotton, 260g/m.
Two-way metal zip-front with studded over-placket.
Two zipped chest pockets.
Two large back patch pockets, one zipped.
One rule pocket.
One tool pocket.
Two swing pockets with side access.
Double pencil pocket on sleeve.
Full back elastication and action back for ease of movement.
Sizes Available:
Regular (30" inside leg): 36" - 54"
Tall (32" inside leg): 42'' - 50''
This listing is for a 44" chest size with a REG leg.
Heavy-duty leather welding hood.
Offers best mix of durability, comfort and protection from sparks and spatter.
Hook-and-loop fastening means one size fits all.
Manufactured from split cow hide leather with Kevlar® stitching.
Conforms to EN ISO 11611.
Model No. SSP145
Heavy-duty traditional welding apron protects body and upper legs when welding.
Manufactured from split cow hide leather with Kevlar® stitching.
Adjustable straps with quick release buckles ensure a secure fit at all times.
Features front hook-and-loop pocket.
Size (W x H): 560 x 890mm.
Conforms to EN ISO 11611.
Model No. SSP146
Manufactured from polycarbonate for superior durability and resistance.
Offers full face protection with an increased range of mobility compared to a standard face protector.
Curved face shield conforms to the shape of the face offering improved protection.
Detachable indirect goggles to allow for extra versatility.
Features a wide angle curved lens for enhanced visibility.
Adjustable headband with soft PVC frame provides added comfort.
Model No. SSP76
Valved for easier breathing
Protects against fine dusts, mists & metal fumes e.g. chromium dust,
nickel dust, cadmium dust, rock wool, glass fibre, mineral wool fibre,
cotton, silica, welding fumes
NPF 50 x OEL
APF 20 x OEL
EN149:2001
Each mask is hygienically packed in a sealed polybag with User
Information
10 Pack
65% polyester, 35% cotton, 260g/m.
Two-way metal zip-front with studded over-placket.
Two zipped chest pockets.
Two large back patch pockets, one zipped.
One rule pocket.
One tool pocket.
Two swing pockets with side access.
Double pencil pocket on sleeve.
Full back elastication and action back for ease of movement.
Sizes Available:
Regular (30" inside leg): 36" - 54"
Tall (32" inside leg): 42'' - 50''
This listing is for a 36" chest size with a REG leg.
65% polyester, 35% cotton, 260g/m.
Two-way metal zip-front with studded over-placket.
Two zipped chest pockets.
Two large back patch pockets, one zipped.
One rule pocket.
One tool pocket.
Two swing pockets with side access.
Double pencil pocket on sleeve.
Full back elastication and action back for ease of movement.
Sizes Available:
TALLular (30" inside leg): 36" - 54"
Tall (32" inside leg): 42'' - 50''
This listing is for a 40" chest size with a TALL leg.
65% polyester, 35% cotton, 260g/m.
Two-way metal zip-front with studded over-placket.
Two zipped chest pockets.
Two large back patch pockets, one zipped.
One rule pocket.
One tool pocket.
Two swing pockets with side access.
Double pencil pocket on sleeve.
Full back elastication and action back for ease of movement.
Sizes Available:
Regular (30" inside leg): 36" - 54"
Tall (32" inside leg): 42'' - 50''
This listing is for a 46" chest size with a REG leg.
65% polyester, 35% cotton, 260g/m.
Two-way metal zip-front with studded over-placket.
Two zipped chest pockets.
Two large back patch pockets, one zipped.
One rule pocket.
One tool pocket.
Two swing pockets with side access.
Double pencil pocket on sleeve.
Full back elastication and action back for ease of movement.
Sizes Available:
TALLular (30" inside leg): 36" - 54"
Tall (32" inside leg): 42'' - 50''
This listing is for a 46" chest size with a TALL leg.
65% polyester, 35% cotton, 260g/m.
Two-way metal zip-front with studded over-placket.
Two zipped chest pockets.
Two large back patch pockets, one zipped.
One rule pocket.
One tool pocket.
Two swing pockets with side access.
Double pencil pocket on sleeve.
Full back elastication and action back for ease of movement.
Sizes Available:
Regular (30" inside leg): 36" - 54"
Tall (32" inside leg): 42'' - 50''
This listing is for a 48" chest size with a REG leg.
65% polyester, 35% cotton, 260g/m.
Two-way metal zip-front with studded over-placket.
Two zipped chest pockets.
Two large back patch pockets, one zipped.
One rule pocket.
One tool pocket.
Two swing pockets with side access.
Double pencil pocket on sleeve.
Full back elastication and action back for ease of movement.
Sizes Available:
TALLular (30" inside leg): 36" - 54"
Tall (32" inside leg): 42'' - 50''
This listing is for a 44" chest size with a TALL leg.
Super comfort thermoplastic rubber face mask with unique extra-wide sealing surface.
Low resistance exhalation valve for easy breathing.
Fully adjustable four-point cradle suspension to ensure comfortable facial fit.
Fitted with twin A1P2 filters to EN 141.
Replacement filter kit available - order Model No. SSP1604FP
Model No. SSP1604
65% polyester, 35% cotton, 260g/m.
Two-way metal zip-front with studded over-placket.
Two zipped chest pockets.
Two large back patch pockets, one zipped.
One rule pocket.
One tool pocket.
Two swing pockets with side access.
Double pencil pocket on sleeve.
Full back elastication and action back for ease of movement.
Sizes Available:
TALLular (30" inside leg): 36" - 54"
Tall (32" inside leg): 42'' - 50''
This listing is for a 50" chest size with a TALL leg.
Up to 4000K cool white light for a Xenon HID Look.
Produces a light that is closer to daylight reducing eye strain and
fatigue.
Has a stylish silver tip to blend in with reflector when unlit.
Street legal and a simple upgrade from standard bulbs, requiring no
changes to vehicle wiring.
H4 Twin Pack plus W5W sidelight bulbs to complete the
look.
Up to 4000K cool white light for a Xenon HID Look.
Produces a light that is closer to daylight reducing eye strain and
fatigue.
Has a stylish silver tip to blend in with reflector when unlit.
Street legal and a simple upgrade from standard bulbs, requiring no
changes to vehicle wiring.
H7 Twin Pack plus W5W sidelight bulbs to complete the
look.
Hard-wearing, yet stylish multi-pocket trouser for all tradespeople.
65% polyester, 35% cotton, 245g/m² fabric
Two side pockets and back hip pocket with button-fastening
Two hook-and-loop-fastened thigh pockets, right pocket with concealed
mobile phone pocket
Men's waist sizes:
Short (29" leg): 28" - 46"
Regular (31" leg): 28" - 50"
Tall (33" leg): 28" - 48"
This listing is for a 46" waist size with a 31" leg.
Hard-wearing, yet stylish multi-pocket trouser for all tradespeople.
65% polyester, 35% cotton, 245g/m² fabric
Two side pockets and back hip pocket with button-fastening
Two hook-and-loop-fastened thigh pockets, right pocket with concealed
mobile phone pocket
Men's waist sizes:
Short (29" leg): 28" - 46"
Regular (31" leg): 28" - 50"
Tall (33" leg): 28" - 48"
This listing is for a 30" waist size with a 29" leg.
Hard-wearing, yet stylish multi-pocket trouser for all tradespeople.
65% polyester, 35% cotton, 245g/m² fabric
Two side pockets and back hip pocket with button-fastening
Two hook-and-loop-fastened thigh pockets, right pocket with concealed
mobile phone pocket
Men's waist sizes:
Short (29" leg): 28" - 46"
Regular (31" leg): 28" - 50"
Tall (33" leg): 28" - 48"
This listing is for a 44" waist size with a 31" leg.
Hard-wearing, yet stylish multi-pocket trouser for all tradespeople.
65% polyester, 35% cotton, 245g/m² fabric
Two side pockets and back hip pocket with button-fastening
Two hook-and-loop-fastened thigh pockets, right pocket with concealed
mobile phone pocket
Men's waist sizes:
Short (29" leg): 28" - 46"
Regular (31" leg): 28" - 50"
Tall (33" leg): 28" - 48"
This listing is for a 44" waist size with a 29" leg.
Hard-wearing, yet stylish multi-pocket trouser for all tradespeople.
65% polyester, 35% cotton, 245g/m² fabric
Two side pockets and back hip pocket with button-fastening
Two hook-and-loop-fastened thigh pockets, right pocket with concealed
mobile phone pocket
Men's waist sizes:
Short (29" leg): 28" - 46"
Regular (31" leg): 28" - 50"
Tall (33" leg): 28" - 48"
This listing is for a 30" waist size with a 31" leg.
Hard-wearing, yet stylish multi-pocket trouser for all tradespeople.
65% polyester, 35% cotton, 245g/m² fabric
Two side pockets and back hip pocket with button-fastening
Two hook-and-loop-fastened thigh pockets, right pocket with concealed
mobile phone pocket
Men's waist sizes:
Short (29" leg): 28" - 46"
Regular (31" leg): 28" - 50"
Tall (33" leg): 28" - 48"
This listing is for a 38" waist size with a 33" leg.
Hard-wearing, yet stylish multi-pocket trouser for all tradespeople.
65% polyester, 35% cotton, 245g/m² fabric
Two side pockets and back hip pocket with button-fastening
Two hook-and-loop-fastened thigh pockets, right pocket with concealed
mobile phone pocket
Men's waist sizes:
Short (29" leg): 28" - 46"
Regular (31" leg): 28" - 50"
Tall (33" leg): 28" - 48"
This listing is for a 42" waist size with a 29" leg.
Hard-wearing, yet stylish multi-pocket trouser for all tradespeople.
65% polyester, 35% cotton, 245g/m² fabric
Two side pockets and back hip pocket with button-fastening
Two hook-and-loop-fastened thigh pockets, right pocket with concealed
mobile phone pocket
Men's waist sizes:
Short (29" leg): 28" - 46"
Regular (31" leg): 28" - 50"
Tall (33" leg): 28" - 48"
This listing is for a 36" waist size with a 29" leg.
Hard-wearing, yet stylish multi-pocket trouser for all tradespeople.
65% polyester, 35% cotton, 245g/m² fabric
Two side pockets and back hip pocket with button-fastening
Two hook-and-loop-fastened thigh pockets, right pocket with concealed
mobile phone pocket
Men's waist sizes:
Short (29" leg): 28" - 46"
Regular (31" leg): 28" - 50"
Tall (33" leg): 28" - 48"
This listing is for a 28" waist size with a 29" leg.
Hard-wearing, yet stylish multi-pocket trouser for all tradespeople.
65% polyester, 35% cotton, 245g/m² fabric
Two side pockets and back hip pocket with button-fastening
Two hook-and-loop-fastened thigh pockets, right pocket with concealed
mobile phone pocket
Men's waist sizes:
Short (29" leg): 28" - 46"
Regular (31" leg): 28" - 50"
Tall (33" leg): 28" - 48"
This listing is for a 46" waist size with a 29" leg.
Hard-wearing, yet stylish multi-pocket trouser for all tradespeople.
65% polyester, 35% cotton, 245g/m² fabric
Two side pockets and back hip pocket with button-fastening
Two hook-and-loop-fastened thigh pockets, right pocket with concealed
mobile phone pocket
Men's waist sizes:
Short (29" leg): 28" - 46"
Regular (31" leg): 28" - 50"
Tall (33" leg): 28" - 48"
This listing is for a 34" waist size with a 31" leg.
Hard-wearing, yet stylish multi-pocket trouser for all tradespeople.
65% polyester, 35% cotton, 245g/m² fabric
Two side pockets and back hip pocket with button-fastening
Two hook-and-loop-fastened thigh pockets, right pocket with concealed
mobile phone pocket
Men's waist sizes:
Short (29" leg): 28" - 46"
Regular (31" leg): 28" - 50"
Tall (33" leg): 28" - 48"
This listing is for a 48" waist size with a 31" leg.
Hard-wearing, yet stylish multi-pocket trouser for all tradespeople.
65% polyester, 35% cotton, 245g/m² fabric
Two side pockets and back hip pocket with button-fastening
Two hook-and-loop-fastened thigh pockets, right pocket with concealed
mobile phone pocket
Men's waist sizes:
Short (29" leg): 28" - 46"
Regular (31" leg): 28" - 50"
Tall (33" leg): 28" - 48"
This listing is for a 48" waist size with a 33" leg.
Hard-wearing, yet stylish multi-pocket trouser for all tradespeople.
65% polyester, 35% cotton, 245g/m² fabric
Two side pockets and back hip pocket with button-fastening
Two hook-and-loop-fastened thigh pockets, right pocket with concealed
mobile phone pocket
Men's waist sizes:
Short (29" leg): 28" - 46"
Regular (31" leg): 28" - 50"
Tall (33" leg): 28" - 48"
This listing is for a 32" waist size with a 29" leg.
Min./Max. Height: 172/372mm.
Fully tested and fitted with overload valve to comply with the latest CE regulations.
Base and reservoir machine welded for increased strength and reduced chance of leakage.
Threaded pump assembly allows for easy disassembly and maintenance.
Supplied with 3pc handle.
Service kits readily available.
Model No. SBJ5W
Hard-wearing, yet stylish multi-pocket trouser for all tradespeople.
65% polyester, 35% cotton, 245g/m² fabric
Two side pockets and back hip pocket with button-fastening
Two hook-and-loop-fastened thigh pockets, right pocket with concealed
mobile phone pocket
Men's waist sizes:
Short (29" leg): 28" - 46"
Regular (31" leg): 28" - 50"
Tall (33" leg): 28" - 48"
This listing is for a 38" waist size with a 29" leg.
Hard-wearing, yet stylish multi-pocket trouser for all tradespeople.
65% polyester, 35% cotton, 245g/m² fabric
Two side pockets and back hip pocket with button-fastening
Two hook-and-loop-fastened thigh pockets, right pocket with concealed
mobile phone pocket
Men's waist sizes:
Short (29" leg): 28" - 46"
Regular (31" leg): 28" - 50"
Tall (33" leg): 28" - 48"
This listing is for a 30" waist size with a 33" leg.
GrimePro Orange is a unique fast acting powerful hand cleansing formula that
rapidly removes even the most stubborn ingrained oil, grease and grime.
Containing no harsh hydrocarbon solvents, GrimePro Orange is caring for skin
and kind to the environment
GrimePro Orange contains carefully selected skin care ingredients with
extract of glycerine to replenish the natural oils lost from the skin during
washing. Micro polymer beads create a gentle scrubbing action for enhanced
removal of grease and grime. A mild yet invigorating citrus orange fragrance
provides for a pleasurable washing experience that leaves the skin feeling
clean and fresh. The creamy lotion is easy to rinse off using either hot or
cold water and leaves no slimy residues.
The GrimePro Orange cartridge and dispenser system offers a permanent and
convenient washroom solution which is easy to use, hygienic and cost
effective.
Using a dispenser system is much more hygienic than the traditional ‘dip-in’
style buckets or jars which are open to the risk of cross contamination from
items falling into them or from previous users with cuts or grazes.
The GrimePro system dispenses a precise measured dose, reducing wastage and
providing substantial cost savings over traditional containers.
The standard 2.5 litre GrimePro Cartridges are simple and quick to replace
with an easy screw on dispensing nozzle.
The wall mounted dispensor can be conveniently located in a washroom and is
supplied with a key to prevent unauthorised access.
This GrimePro Starter Kit contains the dispenser and four 2.5 litre
cartridges
GrimePro Orange is a unique fast acting powerful hand cleansing formula that
rapidly removes even the most stubborn ingrained oil, grease and grime.
Containing no harsh hydrocarbon solvents, GrimePro Orange is caring for skin
and kind to the environment
GrimePro Orange contains carefully selected skin care ingredients with
extract of glycerine to replenish the natural oils lost from the skin during
washing. Micro polymer beads create a gentle scrubbing action for enhanced
removal of grease and grime. A mild yet invigorating citrus orange fragrance
provides for a pleasurable washing experience that leaves the skin feeling
clean and fresh. The creamy lotion is easy to rinse off using either hot or
cold water and leaves no slimy residues.
GrimePro Orange hand cleanser is available in a 10L tub for garages and
workshops looking for a bulk solution.
GrimePro Orange is a unique fast acting powerful hand cleansing formula that
rapidly removes even the most stubborn ingrained oil, grease and grime.
Containing no harsh hydrocarbon solvents, GrimePro Orange is caring for skin
and kind to the environment
GrimePro Orange contains carefully selected skin care ingredients with
extract of glycerine to replenish the natural oils lost from the skin during
washing. Micro polymer beads create a gentle scrubbing action for enhanced
removal of grease and grime. A mild yet invigorating citrus orange fragrance
provides for a pleasurable washing experience that leaves the skin feeling
clean and fresh. The creamy lotion is easy to rinse off using either hot or
cold water and leaves no slimy residues.
A GrimePro Orange pump pack is a handy portable solution for a garage or
workshop environment. The 3L size pump pack provides substantial cost savings
and reduced wastage compared to tradition dip-in style containers by delivering
a precise measured dosage.
Manufactured from hard wearing polyethylene.
Ideal for indoor and outdoor storage of grit, sand and salt.
Angled lid forces water to run off, keeping contents dry.
Features large opening for easy access.
Compatible with most pallet trucks.
Capacity: 130ltr
Dimensions (W x D x H): 850 x 500 x 750mm
Rimbands alloy wheel rim protectors are a stretchy band of high strength
tear resistant silicone rubber. They are fitted around the circumference of
alloy wheel rims adding a styling trim ring that helps to protect the wheels
surface from damage caused by hitting kerbs whilst parking and going over
potholes in the road surface whilst driving.
Rimbands have an extensive tail section that sits right into the barrel of
the wheel. Rimbands have been designed to have the correct amount of stretch to
ensure a tight fit and 5 gripping ribs stop them from slipping out whilst
driving.
Rimbands are made from a silicone rubber and are totally sealed around the
wheel meaning the tyre can grip into them giving no risk of air loss. Rimbands
are the safest type of rim protector that requires the tyre to hold it in
place. Rimbands are coated at factory in a special Flurobond sealant, which
protects the rubber from brake dust and prolongs it’s life span. As Rimbands
are made from rubber, they will not damage the wheel surface.
Rimbands are size specific, so make sure you order the right size for your
wheels. They are universal fitting and fit most types of alloy wheels, however
they do fit lipped wheels better than flat faced wheels as the top edge curls
around the lip and this stops them being pushed off by the tyre under load and
when installing.
Rimbands alloy wheel rim protectors are designed for professional
installation only. They cannot be fitted at home and this should not be
attempted.
Rimbands alloy wheel rim protectors are a stretchy band of high strength
tear resistant silicone rubber. They are fitted around the circumference of
alloy wheel rims adding a styling trim ring that helps to protect the wheels
surface from damage caused by hitting kerbs whilst parking and going over
potholes in the road surface whilst driving.
Rimbands have an extensive tail section that sits right into the barrel of
the wheel. Rimbands have been designed to have the correct amount of stretch to
ensure a tight fit and 5 gripping ribs stop them from slipping out whilst
driving.
Rimbands are made from a silicone rubber and are totally sealed around the
wheel meaning the tyre can grip into them giving no risk of air loss. Rimbands
are the safest type of rim protector that requires the tyre to hold it in
place. Rimbands are coated at factory in a special Flurobond sealant, which
protects the rubber from brake dust and prolongs it’s life span. As Rimbands
are made from rubber, they will not damage the wheel surface.
Rimbands are size specific, so make sure you order the right size for your
wheels. They are universal fitting and fit most types of alloy wheels, however
they do fit lipped wheels better than flat faced wheels as the top edge curls
around the lip and this stops them being pushed off by the tyre under load and
when installing.
Rimbands alloy wheel rim protectors are designed for professional
installation only. They cannot be fitted at home and this should not be
attempted.
Rimbands alloy wheel rim protectors are a stretchy band of high strength
tear resistant silicone rubber. They are fitted around the circumference of
alloy wheel rims adding a styling trim ring that helps to protect the wheels
surface from damage caused by hitting kerbs whilst parking and going over
potholes in the road surface whilst driving.
Rimbands have an extensive tail section that sits right into the barrel of
the wheel. Rimbands have been designed to have the correct amount of stretch to
ensure a tight fit and 5 gripping ribs stop them from slipping out whilst
driving.
Rimbands are made from a silicone rubber and are totally sealed around the
wheel meaning the tyre can grip into them giving no risk of air loss. Rimbands
are the safest type of rim protector that requires the tyre to hold it in
place. Rimbands are coated at factory in a special Flurobond sealant, which
protects the rubber from brake dust and prolongs it’s life span. As Rimbands
are made from rubber, they will not damage the wheel surface.
Rimbands are size specific, so make sure you order the right size for your
wheels. They are universal fitting and fit most types of alloy wheels, however
they do fit lipped wheels better than flat faced wheels as the top edge curls
around the lip and this stops them being pushed off by the tyre under load and
when installing.
Rimbands alloy wheel rim protectors are designed for professional
installation only. They cannot be fitted at home and this should not be
attempted.
Rimbands alloy wheel rim protectors are a stretchy band of high strength
tear resistant silicone rubber. They are fitted around the circumference of
alloy wheel rims adding a styling trim ring that helps to protect the wheels
surface from damage caused by hitting kerbs whilst parking and going over
potholes in the road surface whilst driving.
Rimbands have an extensive tail section that sits right into the barrel of
the wheel. Rimbands have been designed to have the correct amount of stretch to
ensure a tight fit and 5 gripping ribs stop them from slipping out whilst
driving.
Rimbands are made from a silicone rubber and are totally sealed around the
wheel meaning the tyre can grip into them giving no risk of air loss. Rimbands
are the safest type of rim protector that requires the tyre to hold it in
place. Rimbands are coated at factory in a special Flurobond sealant, which
protects the rubber from brake dust and prolongs it’s life span. As Rimbands
are made from rubber, they will not damage the wheel surface.
Rimbands are size specific, so make sure you order the right size for your
wheels. They are universal fitting and fit most types of alloy wheels, however
they do fit lipped wheels better than flat faced wheels as the top edge curls
around the lip and this stops them being pushed off by the tyre under load and
when installing.
Rimbands alloy wheel rim protectors are designed for professional
installation only. They cannot be fitted at home and this should not be
attempted.
Rimbands alloy wheel rim protectors are a stretchy band of high strength
tear resistant silicone rubber. They are fitted around the circumference of
alloy wheel rims adding a styling trim ring that helps to protect the wheels
surface from damage caused by hitting kerbs whilst parking and going over
potholes in the road surface whilst driving.
Rimbands have an extensive tail section that sits right into the barrel of
the wheel. Rimbands have been designed to have the correct amount of stretch to
ensure a tight fit and 5 gripping ribs stop them from slipping out whilst
driving.
Rimbands are made from a silicone rubber and are totally sealed around the
wheel meaning the tyre can grip into them giving no risk of air loss. Rimbands
are the safest type of rim protector that requires the tyre to hold it in
place. Rimbands are coated at factory in a special Flurobond sealant, which
protects the rubber from brake dust and prolongs it’s life span. As Rimbands
are made from rubber, they will not damage the wheel surface.
Rimbands are size specific, so make sure you order the right size for your
wheels. They are universal fitting and fit most types of alloy wheels, however
they do fit lipped wheels better than flat faced wheels as the top edge curls
around the lip and this stops them being pushed off by the tyre under load and
when installing.
Rimbands alloy wheel rim protectors are designed for professional
installation only. They cannot be fitted at home and this should not be
attempted.
Rimbands alloy wheel rim protectors are a stretchy band of high strength
tear resistant silicone rubber. They are fitted around the circumference of
alloy wheel rims adding a styling trim ring that helps to protect the wheels
surface from damage caused by hitting kerbs whilst parking and going over
potholes in the road surface whilst driving.
Rimbands have an extensive tail section that sits right into the barrel of
the wheel. Rimbands have been designed to have the correct amount of stretch to
ensure a tight fit and 5 gripping ribs stop them from slipping out whilst
driving.
Rimbands are made from a silicone rubber and are totally sealed around the
wheel meaning the tyre can grip into them giving no risk of air loss. Rimbands
are the safest type of rim protector that requires the tyre to hold it in
place. Rimbands are coated at factory in a special Flurobond sealant, which
protects the rubber from brake dust and prolongs it’s life span. As Rimbands
are made from rubber, they will not damage the wheel surface.
Rimbands are size specific, so make sure you order the right size for your
wheels. They are universal fitting and fit most types of alloy wheels, however
they do fit lipped wheels better than flat faced wheels as the top edge curls
around the lip and this stops them being pushed off by the tyre under load and
when installing.
Rimbands alloy wheel rim protectors are designed for professional
installation only. They cannot be fitted at home and this should not be
attempted.
Rimbands alloy wheel rim protectors are a stretchy band of high strength
tear resistant silicone rubber. They are fitted around the circumference of
alloy wheel rims adding a styling trim ring that helps to protect the wheels
surface from damage caused by hitting kerbs whilst parking and going over
potholes in the road surface whilst driving.
Rimbands have an extensive tail section that sits right into the barrel of
the wheel. Rimbands have been designed to have the correct amount of stretch to
ensure a tight fit and 5 gripping ribs stop them from slipping out whilst
driving.
Rimbands are made from a silicone rubber and are totally sealed around the
wheel meaning the tyre can grip into them giving no risk of air loss. Rimbands
are the safest type of rim protector that requires the tyre to hold it in
place. Rimbands are coated at factory in a special Flurobond sealant, which
protects the rubber from brake dust and prolongs it’s life span. As Rimbands
are made from rubber, they will not damage the wheel surface.
Rimbands are size specific, so make sure you order the right size for your
wheels. They are universal fitting and fit most types of alloy wheels, however
they do fit lipped wheels better than flat faced wheels as the top edge curls
around the lip and this stops them being pushed off by the tyre under load and
when installing.
Rimbands alloy wheel rim protectors are designed for professional
installation only. They cannot be fitted at home and this should not be
attempted.
Rimbands alloy wheel rim protectors are a stretchy band of high strength
tear resistant silicone rubber. They are fitted around the circumference of
alloy wheel rims adding a styling trim ring that helps to protect the wheels
surface from damage caused by hitting kerbs whilst parking and going over
potholes in the road surface whilst driving.
Rimbands have an extensive tail section that sits right into the barrel of
the wheel. Rimbands have been designed to have the correct amount of stretch to
ensure a tight fit and 5 gripping ribs stop them from slipping out whilst
driving.
Rimbands are made from a silicone rubber and are totally sealed around the
wheel meaning the tyre can grip into them giving no risk of air loss. Rimbands
are the safest type of rim protector that requires the tyre to hold it in
place. Rimbands are coated at factory in a special Flurobond sealant, which
protects the rubber from brake dust and prolongs it’s life span. As Rimbands
are made from rubber, they will not damage the wheel surface.
Rimbands are size specific, so make sure you order the right size for your
wheels. They are universal fitting and fit most types of alloy wheels, however
they do fit lipped wheels better than flat faced wheels as the top edge curls
around the lip and this stops them being pushed off by the tyre under load and
when installing.
Rimbands alloy wheel rim protectors are designed for professional
installation only. They cannot be fitted at home and this should not be
attempted.
Rimbands alloy wheel rim protectors are a stretchy band of high strength
tear resistant silicone rubber. They are fitted around the circumference of
alloy wheel rims adding a styling trim ring that helps to protect the wheels
surface from damage caused by hitting kerbs whilst parking and going over
potholes in the road surface whilst driving.
Rimbands have an extensive tail section that sits right into the barrel of
the wheel. Rimbands have been designed to have the correct amount of stretch to
ensure a tight fit and 5 gripping ribs stop them from slipping out whilst
driving.
Rimbands are made from a silicone rubber and are totally sealed around the
wheel meaning the tyre can grip into them giving no risk of air loss. Rimbands
are the safest type of rim protector that requires the tyre to hold it in
place. Rimbands are coated at factory in a special Flurobond sealant, which
protects the rubber from brake dust and prolongs it’s life span. As Rimbands
are made from rubber, they will not damage the wheel surface.
Rimbands are size specific, so make sure you order the right size for your
wheels. They are universal fitting and fit most types of alloy wheels, however
they do fit lipped wheels better than flat faced wheels as the top edge curls
around the lip and this stops them being pushed off by the tyre under load and
when installing.
Rimbands alloy wheel rim protectors are designed for professional
installation only. They cannot be fitted at home and this should not be
attempted.
Rimbands alloy wheel rim protectors are a stretchy band of high strength
tear resistant silicone rubber. They are fitted around the circumference of
alloy wheel rims adding a styling trim ring that helps to protect the wheels
surface from damage caused by hitting kerbs whilst parking and going over
potholes in the road surface whilst driving.
Rimbands have an extensive tail section that sits right into the barrel of
the wheel. Rimbands have been designed to have the correct amount of stretch to
ensure a tight fit and 5 gripping ribs stop them from slipping out whilst
driving.
Rimbands are made from a silicone rubber and are totally sealed around the
wheel meaning the tyre can grip into them giving no risk of air loss. Rimbands
are the safest type of rim protector that requires the tyre to hold it in
place. Rimbands are coated at factory in a special Flurobond sealant, which
protects the rubber from brake dust and prolongs it’s life span. As Rimbands
are made from rubber, they will not damage the wheel surface.
Rimbands are size specific, so make sure you order the right size for your
wheels. They are universal fitting and fit most types of alloy wheels, however
they do fit lipped wheels better than flat faced wheels as the top edge curls
around the lip and this stops them being pushed off by the tyre under load and
when installing.
Rimbands alloy wheel rim protectors are designed for professional
installation only. They cannot be fitted at home and this should not be
attempted.
Rimbands alloy wheel rim protectors are a stretchy band of high strength
tear resistant silicone rubber. They are fitted around the circumference of
alloy wheel rims adding a styling trim ring that helps to protect the wheels
surface from damage caused by hitting kerbs whilst parking and going over
potholes in the road surface whilst driving.
Rimbands have an extensive tail section that sits right into the barrel of
the wheel. Rimbands have been designed to have the correct amount of stretch to
ensure a tight fit and 5 gripping ribs stop them from slipping out whilst
driving.
Rimbands are made from a silicone rubber and are totally sealed around the
wheel meaning the tyre can grip into them giving no risk of air loss. Rimbands
are the safest type of rim protector that requires the tyre to hold it in
place. Rimbands are coated at factory in a special Flurobond sealant, which
protects the rubber from brake dust and prolongs it’s life span. As Rimbands
are made from rubber, they will not damage the wheel surface.
Rimbands are size specific, so make sure you order the right size for your
wheels. They are universal fitting and fit most types of alloy wheels, however
they do fit lipped wheels better than flat faced wheels as the top edge curls
around the lip and this stops them being pushed off by the tyre under load and
when installing.
Rimbands alloy wheel rim protectors are designed for professional
installation only. They cannot be fitted at home and this should not be
attempted.
Rimbands alloy wheel rim protectors are a stretchy band of high strength
tear resistant silicone rubber. They are fitted around the circumference of
alloy wheel rims adding a styling trim ring that helps to protect the wheels
surface from damage caused by hitting kerbs whilst parking and going over
potholes in the road surface whilst driving.
Rimbands have an extensive tail section that sits right into the barrel of
the wheel. Rimbands have been designed to have the correct amount of stretch to
ensure a tight fit and 5 gripping ribs stop them from slipping out whilst
driving.
Rimbands are made from a silicone rubber and are totally sealed around the
wheel meaning the tyre can grip into them giving no risk of air loss. Rimbands
are the safest type of rim protector that requires the tyre to hold it in
place. Rimbands are coated at factory in a special Flurobond sealant, which
protects the rubber from brake dust and prolongs it’s life span. As Rimbands
are made from rubber, they will not damage the wheel surface.
Rimbands are size specific, so make sure you order the right size for your
wheels. They are universal fitting and fit most types of alloy wheels, however
they do fit lipped wheels better than flat faced wheels as the top edge curls
around the lip and this stops them being pushed off by the tyre under load and
when installing.
Rimbands alloy wheel rim protectors are designed for professional
installation only. They cannot be fitted at home and this should not be
attempted.
Rimbands alloy wheel rim protectors are a stretchy band of high strength
tear resistant silicone rubber. They are fitted around the circumference of
alloy wheel rims adding a styling trim ring that helps to protect the wheels
surface from damage caused by hitting kerbs whilst parking and going over
potholes in the road surface whilst driving.
Rimbands have an extensive tail section that sits right into the barrel of
the wheel. Rimbands have been designed to have the correct amount of stretch to
ensure a tight fit and 5 gripping ribs stop them from slipping out whilst
driving.
Rimbands are made from a silicone rubber and are totally sealed around the
wheel meaning the tyre can grip into them giving no risk of air loss. Rimbands
are the safest type of rim protector that requires the tyre to hold it in
place. Rimbands are coated at factory in a special Flurobond sealant, which
protects the rubber from brake dust and prolongs it’s life span. As Rimbands
are made from rubber, they will not damage the wheel surface.
Rimbands are size specific, so make sure you order the right size for your
wheels. They are universal fitting and fit most types of alloy wheels, however
they do fit lipped wheels better than flat faced wheels as the top edge curls
around the lip and this stops them being pushed off by the tyre under load and
when installing.
Rimbands alloy wheel rim protectors are designed for professional
installation only. They cannot be fitted at home and this should not be
attempted.
Easy to apply for super smooth finish
Forms the ideal base for all automotive top coats
A consistent fast and even spray rate, quick coverage, quick
drying
Small paint particles, no run, no powdery finish
True matt finish from matt paints, deep brilliant shine from gloss
paint
500ml Aerosol - Clear Lacquer Acrylic
Easy to apply for super smooth finish
Forms the ideal base for all automotive top coats
A consistent fast and even spray rate, quick coverage, quick
drying
Small paint particles, no run, no powdery finish
True matt finish from matt paints, deep brilliant shine from gloss
paint
500ml Aerosol - Red Oxide Primer
Hard-wearing, yet stylish multi-pocket trouser for all tradespeople.
65% polyester, 35% cotton, 245g/m² fabric
Two side pockets and back hip pocket with button-fastening
Two hook-and-loop-fastened thigh pockets, right pocket with concealed
mobile phone pocket
Men's waist sizes:
Short (29" leg): 28" - 46"
Regular (31" leg): 28" - 50"
Tall (33" leg): 28" - 48"
This listing is for a 42" waist size with a 31" leg.
Hard-wearing, yet stylish multi-pocket trouser for all tradespeople.
65% polyester, 35% cotton, 245g/m² fabric
Two side pockets and back hip pocket with button-fastening
Two hook-and-loop-fastened thigh pockets, right pocket with concealed
mobile phone pocket
Men's waist sizes:
Short (29" leg): 28" - 46"
Regular (31" leg): 28" - 50"
Tall (33" leg): 28" - 48"
This listing is for a 28" waist size with a 31" leg.
Hard-wearing, yet stylish multi-pocket trouser for all tradespeople.
65% polyester, 35% cotton, 245g/m² fabric
Two side pockets and back hip pocket with button-fastening
Two hook-and-loop-fastened thigh pockets, right pocket with concealed
mobile phone pocket
Men's waist sizes:
Short (29" leg): 28" - 46"
Regular (31" leg): 28" - 50"
Tall (33" leg): 28" - 48"
This listing is for a 28" waist size with a 33" leg.
Hard-wearing, yet stylish multi-pocket trouser for all tradespeople.
65% polyester, 35% cotton, 245g/m² fabric
Two side pockets and back hip pocket with button-fastening
Two hook-and-loop-fastened thigh pockets, right pocket with concealed
mobile phone pocket
Men's waist sizes:
Short (29" leg): 28" - 46"
Regular (31" leg): 28" - 50"
Tall (33" leg): 28" - 48"
This listing is for a 40" waist size with a 29" leg.
Hard-wearing, yet stylish multi-pocket trouser for all tradespeople.
65% polyester, 35% cotton, 245g/m² fabric
Two side pockets and back hip pocket with button-fastening
Two hook-and-loop-fastened thigh pockets, right pocket with concealed
mobile phone pocket
Men's waist sizes:
Short (29" leg): 28" - 46"
Regular (31" leg): 28" - 50"
Tall (33" leg): 28" - 48"
This listing is for a 50" waist size with a 31" leg.
Hard-wearing, yet stylish multi-pocket trouser for all tradespeople.
65% polyester, 35% cotton, 245g/m² fabric
Two side pockets and back hip pocket with button-fastening
Two hook-and-loop-fastened thigh pockets, right pocket with concealed
mobile phone pocket
Men's waist sizes:
Short (29" leg): 28" - 46"
Regular (31" leg): 28" - 50"
Tall (33" leg): 28" - 48"
This listing is for a 46" waist size with a 33" leg.
Hard-wearing, yet stylish multi-pocket trouser for all tradespeople.
65% polyester, 35% cotton, 245g/m² fabric
Two side pockets and back hip pocket with button-fastening
Two hook-and-loop-fastened thigh pockets, right pocket with concealed
mobile phone pocket
Men's waist sizes:
Short (29" leg): 28" - 46"
Regular (31" leg): 28" - 50"
Tall (33" leg): 28" - 48"
This listing is for a 40" waist size with a 33" leg.
Hard-wearing, yet stylish multi-pocket trouser for all tradespeople.
65% polyester, 35% cotton, 245g/m² fabric
Two side pockets and back hip pocket with button-fastening
Two hook-and-loop-fastened thigh pockets, right pocket with concealed
mobile phone pocket
Men's waist sizes:
Short (29" leg): 28" - 46"
Regular (31" leg): 28" - 50"
Tall (33" leg): 28" - 48"
This listing is for a 42" waist size with a 33" leg.
Hard-wearing, yet stylish multi-pocket trouser for all tradespeople.
65% polyester, 35% cotton, 245g/m² fabric
Two side pockets and back hip pocket with button-fastening
Two hook-and-loop-fastened thigh pockets, right pocket with concealed
mobile phone pocket
Men's waist sizes:
Short (29" leg): 28" - 46"
Regular (31" leg): 28" - 50"
Tall (33" leg): 28" - 48"
This listing is for a 40" waist size with a 31" leg.
Fully tested and fitted with overload valve to comply with the latest
CE regulations.
Base and reservoir machine welded for increased strength and reduced
chance of leakage.
Threaded pump assembly allows for easy disassembly and
maintenance.
Supplied with 3pc handle.
Service kits readily available
Capacity (Tonne): 10
Minimum Height (mm): 220
Maximum Height (mm): 483
Hydraulic Lift (mm): 148
Screw Extension (mm): 115
Drop-forged Chrome Vanadium steel spanners, fully polished with a mirror finish.
Hardened and tempered for corrosion resistance.
Contents: Combination Spanners; 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22, 24, 27, 30, 32mm, Stubby Combination Spanners; 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm, Deep Offset Double Ring Spanners; 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22mm, TRX-Star* Double End Spanners; E6 x E8, E10 x E12, E14 x E18, E20 x E24.
Supplied in heavy-duty tool roll.
Model No. S0932
Min./Max. Height: 212/468mm.
Fully tested and fitted with overload valve to comply with the latest CE regulations.
Base and reservoir machine welded for increased strength and reduced chance of leakage.
Threaded pump assembly allows for easy disassembly and maintenance.
Supplied with 3pc handle.
Service kits readily available.
Model No. SBJ5W
Min./Max. Height: 230/495mm.
Fully tested and fitted with overload valve to comply with the latest CE regulations.
Base and reservoir machine welded for increased strength and reduced chance of leakage.
Threaded pump assembly allows for easy disassembly and maintenance.
Fitted with carrying handle.
Supplied with 3pc handle.
Service kits readily available.
Model No. SBJ12W
Easy to apply for super smooth finish
Forms the ideal base for all automotive top coats
A consistent fast and even spray rate, quick coverage, quick
drying
Small paint particles, no run, no powdery finish
True matt finish from matt paints, deep brilliant shine from gloss
paint
500ml Aerosol - Satin Matt Black
Easy to apply for super smooth finish
Forms the ideal base for all automotive top coats
A consistent fast and even spray rate, quick coverage, quick
drying
Small paint particles, no run, no powdery finish
True matt finish from matt paints, deep brilliant shine from gloss
paint
500ml Aerosol - Black Gloss
Hard-wearing, yet stylish multi-pocket trouser for all tradespeople.
65% polyester, 35% cotton, 245g/m² fabric
Two side pockets and back hip pocket with button-fastening
Two hook-and-loop-fastened thigh pockets, right pocket with concealed
mobile phone pocket
Men's waist sizes:
Short (29" leg): 28" - 46"
Regular (31" leg): 28" - 50"
Tall (33" leg): 28" - 48"
This listing is for a 44" waist size with a 33" leg.
Easy to apply for super smooth finish
Forms the ideal base for all automotive top coats
A consistent fast and even spray rate, quick coverage, quick
drying
Small paint particles, no run, no powdery finish
True matt finish from matt paints, deep brilliant shine from gloss
paint
500ml Aerosol - White Gloss
Easy to apply for super smooth finish
Forms the ideal base for all automotive top coats
A consistent fast and even spray rate, quick coverage, quick
drying
Small paint particles, no run, no powdery finish
True matt finish from matt paints, deep brilliant shine from gloss
paint
500ml Aerosol - White Primer
Easy to apply for super smooth finish
Forms the ideal base for all automotive top coats
A consistent fast and even spray rate, quick coverage, quick
drying
Small paint particles, no run, no powdery finish
True matt finish from matt paints, deep brilliant shine from gloss
paint
500ml Aerosol - Matt Black
Easy to apply for super smooth finish
Forms the ideal base for all automotive top coats
A consistent fast and even spray rate, quick coverage, quick
drying
Small paint particles, no run, no powdery finish
True matt finish from matt paints, deep brilliant shine from gloss
paint
500ml Aerosol - Grey Primer
Baseball bump cap with solid internal cover for protection against knocks and grazes.
Convenient short peak design, better suited for working in and around vehicles.
Adjustable strap suits all sizes.
Internal padding and ventilation for added comfort.
Conforms to EN 812.
Model No. SSP16
Modern safety trainer styling combined with lightweight sole technology for
extreme comfort.
Modern styling
Lightweight sole technology for extreme comfort
Black leather upper
Shock absorbing rubber sole
Steel midsole
Anti-static
200 joule EN ISO 20345.
Size: 12
Lightweight yet rugged construction offering protection to BS EN 352.1.
SNR Rating 30dB.
Adjustable swivel cups for optimum comfort and safety.
Arms fold in for easy storage.
Fully approved to protect against high noise levels in most working environments.
Model No. SSP18F
Shade 11 welding helmet.
Complies to BS EN 379, BS EN 175 and DIN standards.
Features automatic switching from light to dark on striking arc.
Fitted with adjustable sensitivity and delay controls for switching light to dark.
Solar panel power supply - no batteries required.
Deluxe contoured helmet with fully adjustable headband featuring front pad for added comfort.
Suitable for MIG, TIG and arc welding.
Model No. S01000
Modern safety trainer styling combined with lightweight sole technology for
extreme comfort.
Modern styling
Lightweight sole technology for extreme comfort
Black leather upper
Shock absorbing rubber sole
Steel midsole
Anti-static
200 joule EN ISO 20345.
Size: 10
Modern safety trainer styling combined with lightweight sole technology for
extreme comfort.
Modern styling
Lightweight sole technology for extreme comfort
Black leather upper
Shock absorbing rubber sole
Steel midsole
Anti-static
200 joule EN ISO 20345.
Size: 11
Modern safety trainer styling combined with lightweight sole technology for
extreme comfort.
Modern styling
Lightweight sole technology for extreme comfort
Black leather upper
Shock absorbing rubber sole
Steel midsole
Anti-static
200 joule EN ISO 20345.
Size: 7
Modern safety trainer styling combined with lightweight sole technology for
extreme comfort.
Modern styling
Lightweight sole technology for extreme comfort
Black leather upper
Shock absorbing rubber sole
Steel midsole
Anti-static
200 joule EN ISO 20345.
Size: 8
Modern safety trainer styling combined with lightweight sole technology for
extreme comfort.
Modern styling
Lightweight sole technology for extreme comfort
Black leather upper
Shock absorbing rubber sole
Steel midsole
Anti-static
200 joule EN ISO 20345.
Size: 9
Modern safety trainer styling combined with lightweight sole technology for
extreme comfort.
Modern styling
Lightweight sole technology for extreme comfort
Black leather upper
Shock absorbing rubber sole
Steel midsole
Anti-static
200 joule EN ISO 20345.
Size: 6
Hard-wearing, yet stylish multi-pocket trouser for all tradespeople.
65% polyester, 35% cotton, 245g/m² fabric
Two side pockets and back hip pocket with button-fastening
Two hook-and-loop-fastened thigh pockets, right pocket with concealed
mobile phone pocket
Men's waist sizes:
Short (29" leg): 28" - 46"
Regular (31" leg): 28" - 50"
Tall (33" leg): 28" - 48"
This listing is for a 32" waist size with a 31" leg.
High quality infinitely variable shade 9-13 lens, with added ability for shades 5-8 by the switch enclosed on the control unit.
Manufactured and tested to BS EN 379.
Fully automatic switching from light to dark on striking arc.
Features infinitely adjustable sensitivity and delay switches.
Grinding function enables user to grind without removing mask.
Deluxe contoured helmet approved to BS EN 175 which give full neck protection and protects lens from scratching when helmet is laid down.
Comfortable headband and non-slip quick release ratchet mechanism.
Suitable for MIG, TIG, arc and gas welding.
Model No. PWH620