Wynn’s Fuel Biocide is a curative as well as preventive treatment against the
formation of micro-organisms in fuel.
Kills bacteria, algae and fungi.
Prevents microbial re-growth.
Is soluble in hydrocarbons and residual water.
Does not affect the fuel quality, is completely combustible.
Neutralizes acids, which could be produced by the micro-organisms.
Prevents filter plugging by organisms.
Handy packaging with dosaging device on top.
To disinfect small fuel tanks (25 – 500 litres) of trucks, boats, vehicles and stationary engines. For diesel and petrol engines. To prevent microbial contamination in all reservoirs, supply lines and filter.
Wynn's Injection System Purge is a cleaning product to remove dirt and deposits from petrol injection systems and to clean inlet valves and ports without disassembly. Cleans injectors, valves, valve stems, combustion chamber and other vital parts in fouled petrol injection systems without dismantling. Restores injector spray pattern. Improves the cylinder compression ratio balance. Frees sticking exhaust valves. Restores the injection time to its original value. Restores good engine operation. Reduces CO and HC values in the exhaust gases in accordance with required standards. Safe for spark plugs and catalytic converters. Can be used on all fuel systems of petrol engines with carburettor, continuous, multipoint, mono-point, direct injection (GDI, FSI, …). Recommended treatment every 20.000 to 30.000 km or when experiencing problems of poor running, rough idling or excessive exhaust emissions
Wynn's Petrol EGR 3 is an aerosol product developed for cleaning the air intake system of all petrol engines.
Provides immediate thorough cleaning of the air intake system, air flow sensor, inlet valves and EGR system.
Strong power jet spray to support cleaning action.
Dissolves gum, lacquer, tar, carbon and varnish.
Easy to use, cleaning takes only 5 minutes, no dismantling of components necessary.
Restores or maintains the engine performance.
Provides a regular and stable idle.
Eliminates and avoids starting problems.
Improves acceleration properties.
Harmless to catalytic convertors.
Recommended to be used at each service interval to maintain cleanliness
Wynn's Petrol Clean 3 is a chemical treatment for petrol engines which provides a
strong one tank clean-up of the petrol fuel system.
Complete cleaning of the fuel system in one tank filling.
Instantly cleans and protects the injectors and restores and maintains ideal injector spray pattern.
Instantly cleans and protects carburettor and inlet valves.
Keeps EGR valves clean.
Reduces the formation of deposits in the combustion chamber.
Restores combustion and engine performance and provides a regular idle.
Eliminates and avoids starting problems.
Reduces CO and HC exhaust emissions.
Does not harm catalytic converters.
Add to the petrol tank. One bottle of 500 ml treats 50 litres of petrol.Repeat the treatment every 10.000 km (6000 miles).
Wynn's Clean Burn for petrol engines reduces exhaust emissions and "rotten
egg" smell.
Improves the combustion and engine performance.
Reduces noxious exhaust gases such as CO and HC.
Eliminates "rotten egg" smell caused by catalytic converters.
Reduces petrol consumption.
Recommended for all petrol carburettor and injection engines, with or without turbocharger. Does not harm catalytic converters of petrol engines.
Wynn's Petrol Power 3 is a chemical treatment for petrol engines which improves engine performance, reduces exhaust emissions, lowers fuel consumption and protects the engine when using bio fuel E10.
Reduces CO and HC emissions.
Improves combustion, engine power, torque and acceleration.
Reduces internal friction between engine parts (cylinder head),
leading to a reduction in fuel consumption.
Improves fuel economy.
Protects the engine when using E10 fuel.
Cleans and protects injectors and inlet valves.
Keeps the EGR system clean.
Reduces the formation of deposits in the combustion chamber.
Does not harm catalytic convertors.
Recommended for all petrol engines (injection, direct injection or carburettor). For petrol and bio petrol up to E10.Add to the petrol tank. One bottle of 500 ml treats 50 litres of petrol.Repeat the treatment every 10.000 km (6000 miles).
Wynn's Petrol EGR Cleaner is an aerosol product
developed for cleaning the air intake system of all petrol
engines.
Provides immediate thorough cleaning of the air intake system, air flow sensor, inlet
valves and EGR system.
Strong power jet spray to support cleaning action.
Dissolves gum, lacquer, tar, carbon and varnish.
Easy to use, cleaning takes only 5 minutes.
Restores or maintains the engine performance.
Provides a regular and stable idle.
Eliminates and avoids starting problems.
Improves acceleration properties.
Harmless to catalytic convertors.
For the air intake manifold, air flow sensor, inlet valves and EGR valve of petrol
engines.
Wynn's Fuel System Cleaner is developed to maintain the cleanliness of the fuel
system and reduce the octane requirement increase.
Maintains the cleanliness of the fuel system.
Reduces the octane requirement increase.
Prevents the formation of deposits in the carburettor and on injectors
and valves.
Lubricates the injectors, the inlet valves, fuel system and upper cylinder
area.
Protects against rust and corrosion.
Facilitates cold starting.
Reduces pre-ignition.
Protects against carburettor icing.
Is suitable for leaded and unleaded petrol and does not contain components
which harm catalytic converters.
For all petrol engines.
Wynn's Xtrem e Petrol System Clean is a powerful ‘one tank ’ clean - up,
designed to restore, protect and maintain the performance of modern direct
injection petrol engines.
Cleans and protects the injectors and entire fuel system restoring lost
engine performance.
Contains PEA (polyetheramine) to help remove stubborn deposits from the
fuel system, combustion chamber and turbo outlet.
Helps maintain the cleanliness of the turbo, EGR and CAT.
Restores fuel economy and reduces exhaust emissions.
Excellent performance in all petrol and bio fuel up to E85.
Recommended for all petrol engines, including direct injection,
carburet t or and hybrid engines (CGI, FSI, GDI, SIDI, TFSI, .. .)
Wynn's Lead Substitute is a treatment with dual action for petrol engines
Protects the valve seats and reduces their wear when
using unleaded petrol.
Preserves the fuel when stored in a tank for a long time,
when the engine is put out of service for a long period or at
irregular use, e.g. LPG engines, motorbikes, lawn mowers,
yachts, outboard engines of pleasure boats, etc.
Forms a protective and lubricating coating on the valves and valve seats, just like the
one built-up by lead in leaded petrol.
Protects the soft valve seats against premature wear when using unleaded petrol
(prevents formation of micro welding).
Prevents degradation of the fuel in the tank when the engine is put out of service for
several months.
Protects the fuel against oxidation.
Prevents deposit formation in the tank and filter caused by oxidation products.
Eases starting of the engine after a period of extended shutdown.
Is safe for the catalytic converter.
Is completely soluble in petrol.
Does not influence the octane number.
For all two and four stroke petrol engines. For engines of cars, motorcycles, LPG engines, yachts, outboard engines, generator sets, pumps and lawn mowers.