About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

Bowers & Wilkins ISW-3 In-Wall & In-Ceiling Subwoofer (Single)
Bowers & Wilkins ISW-3
In-Wall & In-Ceiling
Subwoofer (Single)
£850
The Bowers & Wilkins ISW-3 is an in-wall or in-ceiling subwoofer designed to offer the maximum level of bass with the minimum amount of impact on the room. This is the first integrated subwoofer by Bowers & Wilkins to include mechanically balanced drive units. This reduces vibration increasing performance & allowing installers more flexibility with where they can install this subwoofer. The twin drivers vent through a waveguide allowing the visible grilles on the side of the unit to be as small as possible making this the most discreet subwoofer that Bowers & Wilkins have released. This unit can be mounted in two ways allowing it to be fitted in either the wall or ceiling increasing the usability & versatility of this subwoofer. The separately purchased SA250 Mk 2 amplifier is suitable for powering this subwoofer with its 250W of power. ...
Available
Bowers & Wilkins ISW-3 In-Wall & In-Ceiling Subwoofer (Single)
Bowers & Wilkins ISW-3
In-Wall & In-Ceiling
Subwoofer (Single)
£850
The Bowers & Wilkins ISW-3 is an in-wall or in-ceiling subwoofer designed to offer the maximum level of bass with the minimum amount of impact on the room. This is the first integrated subwoofer by Bowers & Wilkins to include mechanically balanced drive units. This reduces vibration increasing performance & allowing installers more flexibility with where they can install this subwoofer. The twin drivers vent through a waveguide allowing the visible grilles on the side of the unit to be as small as possible making this the most discreet subwoofer that Bowers & Wilkins have released. This unit can be mounted in two ways allowing it to be fitted in either the wall or ceiling increasing the usability & versatility of this subwoofer. The separately purchased SA250 Mk 2 amplifier is suitable for powering this subwoofer with its 250W of power. ...
Available
Bowers & Wilkins ISW-3 In-Wall & In-Ceiling Subwoofer (Single)
Bowers & Wilkins ISW-3
In-Wall & In-Ceiling
Subwoofer (Single)
£850
The Bowers & Wilkins ISW-3 is an in-wall or in-ceiling subwoofer designed to offer the maximum level of bass with the minimum amount of impact on the room. This is the first integrated subwoofer by Bowers & Wilkins to include mechanically balanced drive units. This reduces vibration increasing performance & allowing installers more flexibility with where they can install this subwoofer. The twin drivers vent through a waveguide allowing the visible grilles on the side of the unit to be as small as possible making this the most discreet subwoofer that Bowers & Wilkins have released. This unit can be mounted in two ways allowing it to be fitted in either the wall or ceiling increasing the usability & versatility of this subwoofer. The separately purchased SA250 Mk 2 amplifier is suitable for powering this subwoofer with its 250W of power. ...
Available
Bowers & Wilkins ISW-3 In-Wall & In-Ceiling Subwoofer (Single)
Bowers & Wilkins ISW-3
In-Wall & In-Ceiling
Subwoofer (Single)
£850
The Bowers & Wilkins ISW-3 is an in-wall or in-ceiling subwoofer designed to offer the maximum level of bass with the minimum amount of impact on the room. This is the first integrated subwoofer by Bowers & Wilkins to include mechanically balanced drive units. This reduces vibration increasing performance & allowing installers more flexibility with where they can install this subwoofer. The twin drivers vent through a waveguide allowing the visible grilles on the side of the unit to be as small as possible making this the most discreet subwoofer that Bowers & Wilkins have released. This unit can be mounted in two ways allowing it to be fitted in either the wall or ceiling increasing the usability & versatility of this subwoofer. The separately purchased SA250 Mk 2 amplifier is suitable for powering this subwoofer with its 250W of power. ...
Available
Bowers & Wilkins ISW-3 In-Wall & In-Ceiling Subwoofer (Single)
Bowers & Wilkins ISW-3
In-Wall & In-Ceiling
Subwoofer (Single)
£850
The Bowers & Wilkins ISW-3 is an in-wall or in-ceiling subwoofer designed to offer the maximum level of bass with the minimum amount of impact on the room. This is the first integrated subwoofer by Bowers & Wilkins to include mechanically balanced drive units. This reduces vibration increasing performance & allowing installers more flexibility with where they can install this subwoofer. The twin drivers vent through a waveguide allowing the visible grilles on the side of the unit to be as small as possible making this the most discreet subwoofer that Bowers & Wilkins have released. This unit can be mounted in two ways allowing it to be fitted in either the wall or ceiling increasing the usability & versatility of this subwoofer. The separately purchased SA250 Mk 2 amplifier is suitable for powering this subwoofer with its 250W of power. ...
Available
Bowers & Wilkins ISW-3 In-Wall & In-Ceiling Subwoofer (Single)
Bowers & Wilkins ISW-3
In-Wall & In-Ceiling
Subwoofer (Single)
£850
The Bowers & Wilkins ISW-3 is an in-wall or in-ceiling subwoofer designed to offer the maximum level of bass with the minimum amount of impact on the room. This is the first integrated subwoofer by Bowers & Wilkins to include mechanically balanced drive units. This reduces vibration increasing performance & allowing installers more flexibility with where they can install this subwoofer. The twin drivers vent through a waveguide allowing the visible grilles on the side of the unit to be as small as possible making this the most discreet subwoofer that Bowers & Wilkins have released. This unit can be mounted in two ways allowing it to be fitted in either the wall or ceiling increasing the usability & versatility of this subwoofer. The separately purchased SA250 Mk 2 amplifier is suitable for powering this subwoofer with its 250W of power. ...
Available
Bowers & Wilkins ISW-3 In-Wall & In-Ceiling Subwoofer (Single)
Bowers & Wilkins ISW-3
In-Wall & In-Ceiling
Subwoofer (Single)
£850
The Bowers & Wilkins ISW-3 is an in-wall or in-ceiling subwoofer designed to offer the maximum level of bass with the minimum amount of impact on the room. This is the first integrated subwoofer by Bowers & Wilkins to include mechanically balanced drive units. This reduces vibration increasing performance & allowing installers more flexibility with where they can install this subwoofer. The twin drivers vent through a waveguide allowing the visible grilles on the side of the unit to be as small as possible making this the most discreet subwoofer that Bowers & Wilkins have released. This unit can be mounted in two ways allowing it to be fitted in either the wall or ceiling increasing the usability & versatility of this subwoofer. The separately purchased SA250 Mk 2 amplifier is suitable for powering this subwoofer with its 250W of power. ...
Available
Bowers & Wilkins ISW-4 In-Wall Subwoofer (Single)
Bowers & Wilkins ISW-4
In-Wall Subwoofer
(Single)
£750
The Bowers & Wilkins ISW-4 is an in-wall subwoofer that is capable of pumping out vast amounts of bass while being practically invisible. Its two long-throw 200mm drivers can move the large amounts of air needed for good quality low-frequency audio. All this while still remaining subtle & hidden away. The separately purchased SA250 Mk 2 amplifier is suitable for powering this subwoofer with its 250W of power. ...
Available
Bowers & Wilkins ISW-4 In-Wall Subwoofer (Single)
Bowers & Wilkins ISW-4
In-Wall Subwoofer
(Single)
£750
The Bowers & Wilkins ISW-4 is an in-wall subwoofer that is capable of pumping out vast amounts of bass while being practically invisible. Its two long-throw 200mm drivers can move the large amounts of air needed for good quality low-frequency audio. All this while still remaining subtle & hidden away. The separately purchased SA250 Mk 2 amplifier is suitable for powering this subwoofer with its 250W of power. ...
Available
image missing
Bowers & Wilkins ISW-4
In-Wall Subwoofer
(Single)
£750
The Bowers & Wilkins ISW-4 is an in-wall subwoofer that is capable of pumping out vast amounts of bass while being practically invisible. Its two long-throw 200mm drivers can move the large amounts of air needed for good quality low-frequency audio. All this while still remaining subtle & hidden away. The separately purchased SA250 Mk 2 amplifier is suitable for powering this subwoofer with its 250W of power. ...
Available

Bowers & Wilkins ISW-3 In-Wall & In-Ceiling Subwoofer (Single)

The Bowers & Wilkins ISW-3 is an in-wall or in-ceiling subwoofer designed to offer the maximum level of bass with the minimum amount of impact on the room. This is the first integrated subwoofer by Bowers & Wilkins to include mechanically balanced drive units. This reduces vibration increasing performance and allowing installers more flexibility with where they can install this subwoofer. The twin drivers vent through a waveguide allowing the visible grilles on the side of the unit to be as small as possible making this the most discreet subwoofer that Bowers & Wilkins have released. This unit can be mounted in two ways allowing it to be fitted in either the wall or ceiling increasing the usability and versatility of this subwoofer. The separately purchased SA250 Mk2 amplifier is suitable
for powering this subwoofer with its 250W of power.
  • Click to be directed to retailers website:

    Buy

    Many items on our site can also be found here:

    Buy
    • External links may include paid for promotion
    Availability: In Stock
    £850
    hifi speakers Electronics > Audio > Audio Components > Speakers > Subwoofers
    Description Reviews / Comments Add New

    Product Description

    The Bowers & Wilkins ISW-3 is an in-wall or in-ceiling subwoofer designed to offer the maximum level of bass with the minimum amount of impact on the room. This is the first integrated subwoofer by Bowers & Wilkins to include mechanically balanced drive units. This reduces vibration increasing performance & allowing installers more flexibility with where they can install this subwoofer. The twin drivers vent through a waveguide allowing the visible grilles on the side of the unit to be as small as possible making this the most discreet subwoofer that Bowers & Wilkins have released. This unit can be mounted in two ways allowing it to be fitted in either the wall or ceiling increasing the usability & versatility of this subwoofer. The separately purchased SA250 Mk 2 amplifier is suitable for powering this subwoofer with its 250W of power.

    Reviews/Comments

    Add New

    Intelligent Comparison

    Oooops!
    We couldn't find anything!
    Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
    Click to bump this page and we'll hurry up.

    Price History

    Vouchers

    No voucher codes found.
    Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

    Facebook

    Jargon Buster

    Wall - A physical barrier between two areas
    Small - something that takes up less space than normal.
    Install - A process of putting materials together to create a finished product.
    Twin - A pair of people or animals that are born at the same time.
    Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.

    Supplier Information

    Audio Visual Online
    Experience audiovisual excellence with AudioVisual Online (http://www.audiovisualonline.co.uk/)! Dive into a world of premium home entertainment solutions, from cutting-edge speakers and headphones to state-of-the-art projectors and screens. With unbeatable prices and expert advice, we're your ultimate destination for creating the ultimate entertainment setup. Whether you're a cinephile, audiophile, or gaming enthusiast, AudioVisual Online has everything you need to elevate your viewing and listening experience. Transform your space into a home theater haven and immerse yourself in unparalleled audiovisual bliss with AudioVisual Online!
    Page Updated: 2024-02-29 17:20:51

    Community Generated Product Tags

    Oh No! The productWIKI community hasn't generated any tags for this product yet!
    Menu