The Audio Technica AT-LH11H an 11-gram headshell is designed with non-threaded through-holes ideally suited for compatibility with a wide range of cartridges. This even

Includes:: cartridges with threaded mounting holes from series such as AT-OC9X AT-ART9X & VM95. As the lightest in the LH series the AT-LH11H Headshells reduced mass decreases unwanted vibrations during playback helping to enhance sound clarity & audio retrieval. The hard anodised finish also minimises vibrations as well as prevents distortion from hindering your listening experience. Equipped with oxygen-free copper lead wires the AT-LH11H delivers flawless signal transmission enabling you to fully engage with your records. in addition the adjustable cylinder allows for precise azimuth & overhang settings guaranteeing accurate alignment of the cartridge. This combination of lightweight construction compatibility & adjustability makes the Audio Technica AT-LH11H 11g Headshell a standout accessory for any turntable setup.

...

The Audio Technica AT-LH13/OCC Technihard 15g Headshell offers an adjustable overhang & azimuth proving reliable cartridge alignment & superb tracking. With its 13g weight the AT-LH13/OCC will help your cartridge capture every audio nuance. The included AT6101 quad wires enable polished signal transmission to produce a vivid vinyl sound. Designed for your convenience the AT-LH13/OCC features a finger lift so you effortlessly switch between songs while the internal headshell threads eliminate the need for nuts to simply cartridge fitting. in addition the rigid Techni Hard design ensures effective longevity for long-term use. ...

The AT-LH13H is a 13-gram universal ½"-mount headshell, optimized to accommodate 4-pin turntable cartridges with threaded bodies, such as the AT-OC9X Series & VM95 Series cartridges ...

The AT-LH13H is a 13-gram universal ½"-mount headshell optimized to accommodate 4-pin turntable cartridges with threaded bodies such as the AT-OC9X Series & VM95 Series cartridges. This aluminum headshell with hard anodized finish reduces unwanted vibration & comes equipped with OFC (oxygen-free copper) lead wires. It also features an adjustable cylinder that enables precise azimuth & overhang settings.

Includes:: cartridge installation screws plastic washers & a hexagonal wrench.  The cartridge is also available in 15-gram (AT-LH15H) & 18-gram (AT-LH18H) models for optimal compatibility with your cartridge/tonearm requirements. 

...

The AT-LH13H is a 13-gram universal ½"-mount headshell optimized to accommodate 4-pin turntable cartridges with threaded bodies such as the AT-OC9X Series & VM95 Series cartridges. This aluminum headshell with hard anodized finish reduces unwanted vibration & comes equipped with OFC (oxygen-free copper) lead wires. It also features an adjustable cylinder that enables precise azimuth & overhang settings.

Includes:: cartridge installation screws plastic washers & a hexagonal wrench.  The cartridge is also available in 15-gram (AT-LH15H) & 18-gram (AT-LH18H) models for optimal compatibility with your cartridge/tonearm requirements. 

...

The AT-LH13H is a 13-gram universal ½"-mount headshell optimized to accommodate 4-pin turntable cartridges with threaded bodies such as the AT-OC9X Series & VM95 Series cartridges. This aluminum headshell with hard anodized finish reduces unwanted vibration & comes equipped with OFC (oxygen-free copper) lead wires. It also features an adjustable cylinder that enables precise azimuth & overhang settings.

Includes:: cartridge installation screws plastic washers & a hexagonal wrench.  The cartridge is also available in 15-gram (AT-LH15H) & 18-gram (AT-LH18H) models for optimal compatibility with your cartridge/tonearm requirements. 

...

The AT-LH13H is a 13-gram universal ½"-mount headshell optimized to accommodate 4-pin turntable cartridges with threaded bodies such as the AT-OC9X Series & VM95 Series cartridges. This aluminum headshell with hard anodized finish reduces unwanted vibration & comes equipped with OFC (oxygen-free copper) lead wires. It also features an adjustable cylinder that enables precise azimuth & overhang settings.

Includes:: cartridge installation screws plastic washers & a hexagonal wrench.  The cartridge is also available in 15-gram (AT-LH15H) & 18-gram (AT-LH18H) models for optimal compatibility with your cartridge/tonearm requirements. 

...

The AT-LH13H is a 13-gram universal ½"-mount headshell optimized to accommodate 4-pin turntable cartridges with threaded bodies such as the AT-OC9X Series & VM95 Series cartridges. This aluminum headshell with hard anodized finish reduces unwanted vibration & comes equipped with OFC (oxygen-free copper) lead wires. It also features an adjustable cylinder that enables precise azimuth & overhang settings.

Includes:: cartridge installation screws plastic washers & a hexagonal wrench.  The cartridge is also available in 15-gram (AT-LH15H) & 18-gram (AT-LH18H) models for optimal compatibility with your cartridge/tonearm requirements. 

...

The AT-LH13H is a 13-gram universal ½"-mount headshell optimized to accommodate 4-pin turntable cartridges with threaded bodies such as the AT-OC9X Series & VM95 Series cartridges. This aluminum headshell with hard anodized finish reduces unwanted vibration & comes equipped with OFC (oxygen-free copper) lead wires. It also features an adjustable cylinder that enables precise azimuth & overhang settings.

Includes:: cartridge installation screws plastic washers & a hexagonal wrench.  The cartridge is also available in 15-gram (AT-LH15H) & 18-gram (AT-LH18H) models for optimal compatibility with your cartridge/tonearm requirements. 

...

The AT-LH13H is a 13-gram universal ½"-mount headshell optimized to accommodate 4-pin turntable cartridges with threaded bodies such as the AT-OC9X Series & VM95 Series cartridges. This aluminum headshell with hard anodized finish reduces unwanted vibration & comes equipped with OFC (oxygen-free copper) lead wires. It also features an adjustable cylinder that enables precise azimuth & overhang settings.

Includes:: cartridge installation screws plastic washers & a hexagonal wrench.  The cartridge is also available in 15-gram (AT-LH15H) & 18-gram (AT-LH18H) models for optimal compatibility with your cartridge/tonearm requirements. 

...