. The WM range of units is high capacity dehumidifiers made to operate at high efficiencies by removing moisture from the air through the refrigeration process. The fan draws the moist air through the cold evaporator coil which cools the air below its dew point. Moisture forms on the evaporator coil & is collected in the condensate tray equipped with an internal condensate pump to remove accumulated moisture easily. The cooled air then passes through the hot condenser coil. It is reheated using the same energy released during the cooling phase plus the additional heat generated by the compressor. Therefore the air is discharged from the dehumidifier at a slightly higher temperature with lower absolute humidity than entered. Continuous circulation of air through the dehumidifier gradually reduces the relative humidity within the area. Because the WM range of units is equipped with an internal humidistat they automatically switch on & off to save energy & expense by maintaining the desired humidity level with intermittent operation Features Voltage 230 Phase 1 Frequency (Hz) 50 Power (k W) 1.5 Current (A) 8 Airflow (m 3/hr) 580 Noise Level (dba) 58 Effective Volume (m 3) 300 Typical Extraction (l/d) 30 Min Operating Temp (°C) 3 Max Operating Temp (°C) 35.. ...

. The WM range of units is high capacity dehumidifiers made to operate at high efficiencies by removing moisture from the air through the refrigeration process. The fan draws the moist air through the cold evaporator coil which cools the air below its dew point. Moisture forms on the evaporator coil & is collected in the condensate tray equipped with an internal condensate pump to remove accumulated moisture easily. The cooled air then passes through the hot condenser coil. It is reheated using the same energy released during the cooling phase plus the additional heat generated by the compressor. Therefore the air is discharged from the dehumidifier at a slightly higher temperature with lower absolute humidity than entered. Continuous circulation of air through the dehumidifier gradually reduces the relative humidity within the area. Because the WM range of units is equipped with an internal humidistat they automatically switch on & off to save energy & expense by maintaining the desired humidity level with intermittent operation Features Voltage 230 Phase 1 Frequency (Hz) 50 Power (k W) 1.5 Current (A) 8 Airflow (m 3/hr) 580 Noise Level (dba) 58 Effective Volume (m 3) 300 Typical Extraction (l/d) 30 Min Operating Temp (°C) 3 Max Operating Temp (°C) 35.. ...

. The DD400 desiccant dehumidifier has a compact rugged lightweight design that facilitates one person's easy transportation & is easily accommodated within space-restricted areas. The unit incorporates a PTC Heater ensuring maximum drying is immediately reached & constantly maintained while running. The dual air inlet feature of the DD400 is ideal for installations where the regeneration supply air needs to be kept separate from the process supply air. In addition to the hours run meter which shows the unit running time an ammeter is also incorporated to monitor the units drying effectiveness. Manual / Automatic control is a standard feature within the DD range of desiccant dehumidifiers & a remote humidistat can quickly & easily be connected for automatic operation & control. The EIP range of DD desiccant dehumidifiers is all manufactured from high-grade stainless steel ensuring a rust-free product when used in the most severe applications. The spigot connectors allow quick & easy installation. All models incorporate a high efficiency patented PPS Rotor. This design

Includes:: an 82% active Silica Gel to ensure optimum performance over the equipment wide operating range of environments. All desiccant rotors supplied by EIPL are washable & designed for high performance / long life Features Voltage 230 Phase 1 Frequency (Hz) 50 Power (k W) 2.2 Current (A) 8 Process Airflow
- Dry Air (m 3/hr) 370 Regen Airflow
- Wet Air (m 3/hr) 150 Process Air Duct Size (mm) 130 Regen Air Duct Size
- Wet Air (mm) 100 Rotor Wheel Speed (rph) 20 Typical Extraction (l/d) 34 Min Operating Temp (°C) -20 Max Operating Temp (°C) 40..




...

. The EIPL CD85 commercial / industrial dehumidifier has been designed to provide energy-efficient humidity control in various applications including offices laboratories apartments storage areas restaurants bars museums locker rooms computers telecommunication rooms basements & crawl spaces. It is a quiet high efficiency a high capacity unit designed to suit your HVAC needs. The configurable inlet & outlet positions ensure flexibility for all applications. The CD85 incorporates a high capacity backwards curved fan making the product ideal for ducted installations. An Inlet air filter condensate pump & status panel are all standard with the CD85. The Hot Gas defrost system ensures quick & efficient clearing of ice from the coil allowing a minimum operating temperature of 3°CFeatures Voltage 230 Phase 1 Frequency (Hz) 50 Power (k W) 0.88 Current (A) 7 Airflow (m 3/hr) 120 Noise Level (dba) 57 Effective Volume (m 3) 237 Typical Extraction (l/d) 35 Min Operating Temp (°C) 3 Max Operating Temp (°C) 35.

Dimensions. W x D x H 600 x 345 x 400 mm Weight 33 kgs..

...

. The EIPL CD85 commercial / industrial dehumidifier has been designed to provide energy-efficient humidity control in various applications including offices laboratories apartments storage areas restaurants bars museums locker rooms computers telecommunication rooms basements & crawl spaces. It is a quiet high efficiency a high capacity unit designed to suit your HVAC needs. The configurable inlet & outlet positions ensure flexibility for all applications. The CD85 incorporates a high capacity backwards curved fan making the product ideal for ducted installations. An Inlet air filter condensate pump & status panel are all standard with the CD85. The Hot Gas defrost system ensures quick & efficient clearing of ice from the coil allowing a minimum operating temperature of 3°CFeatures Voltage 230 Phase 1 Frequency (Hz) 50 Power (k W) 0.88 Current (A) 7 Airflow (m 3/hr) 120 Noise Level (dba) 57 Effective Volume (m 3) 237 Typical Extraction (l/d) 35 Min Operating Temp (°C) 3 Max Operating Temp (°C) 35.

Dimensions. W x D x H 600 x 345 x 400 mm Weight 33 kgs..

...

. The EIPL CD200 dehumidifier has been introduced to serve the demands of medium-sized areas without the need to use multiple units. Warehouses factories offices & other medium-scale facilities with ambient temperatures ranging from 3°C to 35°C can be cured of humidity & condensation problems efficiently & automatically. The CD200 unit can be utilized singly or in multiple units to protect on any scale. Ducted applications are possible where design requirements specify. The CD200 incorporates EIPL's unique temperature-sensitive Reverse Cycle defrosting feature. This proven defrosting method allows the unit to function smoothly in all temperatures while maintaining optimum performance at higher temperatures. The twin speed centrifugal fan maximizes air delivery over longer distances. Under maximum conditions the CD200 will remove up to 100 lbs/day. The remote humidistat feature of the CD200 makes the unit the ideal choice for where remote sensing & control is required. Optional duct mounting flanges reduces the installation time when connecting to an existing/new ducting system Features Voltage 230 Phase 1 Frequency (Hz) 50 Power (k W) 2.25 Current (A) 10.6 Airflow (m 3/hr) 1050 Noise Level (dba) 73 Effective Volume (m 3) 600 Typical Extraction (l/d) 65 Min Operating Temp (°C) 3 Max Operating Temp (°C) 35.. ...

. The DD700 is of the desiccant wheel type designed to dry air bypassing a large volume of air the process air through a slowly rotating Silica gel rotor. Silica gel is a hygroscopic material that absorbs moisture direct from the air. As the air passes through the rotor the humidity of the air is reduced whilst the moisture content of the rotor is increased. A smaller volume of air the reactivation air is heated by an internal heater & passes through a portion of the rotor in the opposite direction. As this heated air passes through the rotor it will reactivate it by removing the moisture content from the silica gel material. The reactivation air will leave the humidifier as warm moist air & must be vented outside the building.. ...

. EIPL are a recognized world wide supplier of flood restoration drying equipment. We offer a variety of dehumidifiers & air movers to remove water & assist with drying areas after water damage. Following a flood whether it is in your basement or office its vitally important to restore the damaged area to good order as soon as possible to protect your health from micro-organisms mold & bacteria that may grow & ultimately prevent further damage. Whether it is a flash flood heavy rains or water main break EIPL have the equipment to handle the harshest environments & assist with proper restoration. EIPLS ROTAMOULDED RANGE The AM2000 Air-mover is another addition to the EIPL range of Rotational Moulded Polyethylene Housings. This super durable housing & EIPLs years of experience with air moving equipment ensures the product not only looks the part but is also capable of outperforming competitors models. The AM2000 has four operating positions three operating speeds & a 1/2hp motor / high capacity fan capable of providing a high volume of air. These features make the AM2000 one of the most versatile air movers available today. The robust ridged handle doubles as a cable wrap & also allows multiple units to be stacked thereby reducing storage space. SAVE TIME & MONEY The AM2000 setup could not be easier select the desired operating angle (0° 15° 45° or 90°) for the application & dial in the desired speed setting. The low profile outlet snout makes it absolutely ideal to duct air under carpets thereby immediately attacking the worse effected areas quickly & efficiently. RIGHT TOOLS FOR THE JOB The AM2000 is the ideal product for fast & professional drying of floors walls ceilings carpets & furnishings after water damage & during renovation clean down Features Voltage 230 Phase 1 Frequency (Hz) 50 Power (k W) 0.45 Current (A) 3 Airflow (m 3/hr) 3500 Noise Level (dba) 72 Effective Volume (m 3) 1050 Min Operating Temp (°C) 0 Max Operating Temp (°C) 35 Height (cm) 51 Width (cm) 50 Depth (cm) 47.5 Weight (kg) 12.. ...

. If you need fast reliable & energy efficient drying we have the answer. In new building construction renovation alteration of existing buildings or even in special circumstances such as flooding there's no quicker or more economical way to reduce moisture without risk of damage to the building materials.  Natural drying will get the job done eventually but Ebac industrial dryers & commercial dehumidifiers cut natural drying times by two thirds. Ideal for commercial & industrial dehumidification. . Key Features Voltage 230 1 Phase Large Wheels Industrial Design with Metal Body Frequency (Hz) 50 Power (k W) 1.5 Current (A) 8 Airflow (m 3/hr) 510 Noise Level  (d BA) 73 Effective Volume (m 3) 300 Typical Extraction  (l/d) 30 Min Operating Temp (°C) 3 Max Operating Temp (°C) 35 Height (mm) 915 Width (mm) 610 Depth (mm) 692 Weight  (kgs) 75 Extra  Features On/ Off Control Via Switch Push Button Start  Revers Cycle Defrost  Electronic Defrost Time Large Diameter Wheels  Refrigerant Type R407c Freestanding   Gravity Drain Cable Wrap  Moulded Mains Plug  Stoved Epoxy Finish All Steel Construction.. ...

. If you need fast reliable & energy efficient drying  we have the answer. In new building construction renovation alteration of existing buildings or even in special circumstances such as fl ooding there's no quicker or more economical way to reduce moisture without risk of damage to the building materials. Natural drying will get the job done eventually but Ebac dryers and industrial dehumidifiers cut natural drying times by two thirds Key Features Height (mm) 915 Width (mm) 610 Depth (mm) 692 Weight  (kgs) 80 Voltage 240 V Phase 1 Frequency (Hz) 50 Power (k W) 1.5 Current (A) 16/8 Airflow (m 3/hr) 510 Noise Level  (d BA) 73 Effective Volume  (m 3) 300 Typical Extraction (l/d) 30 Min Operating Temp (°C) 3 Max Operating Temp (°C) 35 Key Features On/ Off Control Via Switch Push Button Start  Revers Cycle Defrost Electronic Defrost Timer Voltage Protection Device  Voltage Selection Switch Large Diameter Wheels Refrigerant Type R407c Freestanding Gravity Drain Cable Wrap Stoved Epoxy Finish All Steel Construction.. ...