More From Contributor

£1586.97
. For use in commercial areas & large buildings the CD100 is the ideal unit to control humidity & maintain desired conditions in your premises. With the capacity to extract up to 30 litres of moisture in 24 hours combined humidistat control the CD100 will maintain conditions without the worry of excessive energy costs or over drying. Installation is quick & easy simply position the unit connect it to the mains supply & switch it on. The CD100 is a free standing unit & comes complete with a tubular 'skid' frame however it can also be fitted to a wall-mounting bracket which can be purchased separately Features Voltage 230 Phase 1 Frequency (Hz) 50 Power (k W) 1.5 Current (A) 8 Airflow (m 3/hr) 510 Noise Level (dba) 57 Effective Volume (m 3) 300 Typical Extraction (l/d) 30 Min Operating Temp (°C) 3 Max Operating Temp (°C) 35.. ...
Archived Product
£1730.97
. For use in commercial areas & large buildings the CD100 is the ideal unit to control humidity & maintain desired conditions in your premises. With the capacity to extract up to 30 litres of moisture in 24 hours using the combined humidistat control the CD100 will maintain conditions without the worry of excessive energy costs or over drying. Installation is quick & easy simply position the unit connect it to the mains supply & switch it on. The CD100 comes complete with an alarm humidistat alarm plug & socket connector heated condensate tube & hour meter & a wall mounting bracket & installation kit Features Voltage 230 Phase 1 Frequency (Hz) 50 Power (k W) 1.5 Current (A) 8 Airflow (m 3/hr) 510 Noise Level (dba) 57 Effective Volume (m 3) 300 Typical Extraction (l/d) 30 Min Operating Temp (°C) 0 Max Operating Temp (°C) 35 Comes with a wall mounting bracket & installation kit... ...
Archived Product
£1318.97
. If you need fast reliable & energy efficient drying  we have the answer. In new building construction renovation alteration of existing buildings or even in special circumstances such as fl ooding there's no quicker or more economical way to reduce moisture without risk of damage to the building materials. Natural drying will get the job done eventually but Ebac dryers and industrial dehumidifiers cut natural drying times by two thirds Key Features Height (mm) 915 Width (mm) 610 Depth (mm) 692 Weight  (kgs) 80 Voltage 240 V Phase 1 Frequency (Hz) 50 Power (k W) 1.5 Current (A) 16/8 Airflow (m 3/hr) 510 Noise Level  (d BA) 73 Effective Volume  (m 3) 300 Typical Extraction (l/d) 30 Min Operating Temp (°C) 3 Max Operating Temp (°C) 35 Key Features On/ Off Control Via Switch Push Button Start  Revers Cycle Defrost Electronic Defrost Timer Voltage Protection Device  Voltage Selection Switch Large Diameter Wheels Refrigerant Type R407c Freestanding Gravity Drain Cable Wrap Stoved Epoxy Finish All Steel Construction.. ...
Archived Product
£993.60
. The new ECO range of dehumidifiers from Ebac is one of the most efficient commercial dehumidifier ranges being designed to help reducing the carbon footprint while delivering a high water extraction rate & a very competitive energy use / water extracted ratio. The ECO85DV dual voltage Dehumidifier is another addition to the Ebac range of Eco Friendly Carbon reducing range of dehumidifiers. The ECO85DV has a maximum l/k Wh (water extraction per k W of power consumed) of 2.47 l/k Wh. This is achieved by utilizing a high capacity rotary compressor & an new environmentally friendly R407c refrigerant. Dual Voltage capacity makes this unit flexible & ideal to use where power source is either 230 V or 110V. The robust collapsible handle & semi-pneumatic tyres ensures transport & maneuverability are not compromised. It is lightweight yet robust design is ideal for commercial & residential work. Its compact size permits one-man operation yet it has the capacity to handle several room-size areas at a time. Best of all it's affordably priced within the budget of most restoration specialists. The Hours Run Meter provides an accurate means of measuring power consumed allowing jobs to be easily & quickly evaluated when requested by insurance companies.. No more worries of forgetting to empty buckets due to specific customer requests the. ECO85DV. incorporates a high capacity condensate pumps as standard.. The 3m maximum pump height will ensure no installation is too difficult. Install connect to a permanent drain & forget until the job is complete.. With the aid of a purge facility all residue water can be drained from the pump tank prior to moving the machine therefore eliminating the chances of spillage.. The ECO85 is equipped with a Hot Gas defrost system ensuring a quick & efficient clearing of ice from the coil allowing a minimum operating temperature as low as 3°CFeatures Voltage (V)  230 / 110 Phase 1 Frequency (Hz) 50 / 60 Power (k W) 0.77 Current (A) 3.8 / 7.6 Airflow  (m 3/hr) 650 Noise Level  (d BA) 52 Refrigerant R407c Effective Volume (m 3) 250 Min Operating Temp (°C) 3 Max Operating Temp (°C) 35 Dimensions H700 x W480 x D390mm Weight 40kg Effective Volume 250 cubic metres Water Extraction 30 litres per day at 30 degrees C 80% Relative Humidity.. ...
Archived Product
£960.48
. The new ECO range of dehumidifiers from Ebac is one of the most efficient commercial dehumidifier ranges being designed to help reducing the carbon footprint while delivering a high water extraction rate & a very competitive energy use / water extracted ratio. The. ECO85. Dehumidifier is another addition to the Ebac range of Eco Friendly Carbon reducing range of dehumidifiers. The ECO85 has a maximum l/k Wh (water extraction per k W of power consumed) of 2.47 l/k Wh. This is achieved by utilizing a high capacity rotary compressor & an new environmentally friendly R407c refrigerant. The robust collapsible handle & semi-pneumatic tyres ensures transport & manoeuvrability are not compromised. It is lightweight yet robust design is ideal for commercial & residential work. Its compact size permits one-man operation yet it has the capacity to handle several room-size areas at a time. Best of all it's affordably priced within the budget of most restoration specialists. The Hours Run Meter provides an accurate means of measuring power consumed allowing jobs to be easily & quickly evaluated when requested by insurance companies.. No more worries of forgetting to empty buckets due to specific customer requests the ECO85 incorporates a high capacity condensate pumps as standard.. The 3m maximum pump height will ensure no installation is too difficult. Install connect to a permanent drain & forget until the job is complete.. With the aid of a purge facility all residue water can be drained from the pump tank prior to moving the machine therefore eliminating the chances of spillage.. The ECO85 is equipped with a Hot Gas defrost system ensuring a quick & efficient clearing of ice from the coil allowing a minimum operating temperature as low as 3°CFeatures Voltage 230 Phase 1 Frequency (Hz) 50 Power (k W) 0.77 Current (A) 3.8 Airflow (m 3/hr) 650 Noise Level (dba) 52 Effective Volume (m 3) 250 Min Operating Temp (°C) 3 Max Operating Temp (°C) 35 Effective Volume 250 cubic metres Water Extraction 30 litres per day at 30 degrees C 80% Relative Humidity Refrigerant R407c Weight 40kg Dimensions H700 x W480 x D390mm.. ...
Archived Product
£1039.14
. This industrial dehumidifier is ideal for both commercial or residential drying & flood restoration. Extracting 30 litres of damaging moisture per day the 10560RD-GB has the capacity you need to restore the health of your environment quickly following any type of water damage. Easily mobile & energy efficient this unit features an integrated condensate pump low-temperature operation & rugged construction to handle the harshest environments & assist with proper restoration.  For room size around 40-50 sqm.SAVE TIME & MONEYNo more worries of forgetting to empty buckets due to customer demands the RM range of products incorporate high capacity condensate pumps. The 3m maximum pump height will ensure no installation is too difficult. Install connect to a permanent drain & forget until the job is complete. With the aid of a purge facility all residual water can be drained from the pump tank prior to moving the machine therefore eliminating the chances of spillage. LOW TEMPERATURE OPERATION VIA HOT GAS DEFROST TECHNOLOGYThe 10560RD-GB is equipped with a Hot Gas defrost system ensuring a quick & efficient clearing of ice from the coil allowing a minimum operating temperature of 3°C. ATTENTION TO DETAILSometimes the less expensive features are overlooked. The 10560RD-GB is supplied complete with cable & hose tidies Not only will this reduce the possibility of damage when the units are transported but also provides easy installation when positioning the equipment.  Features. Room size 40-50 sqm  Voltage 230 / 110 VPhase 1 Frequency (Hz) 50 Power (k W) 0.68 Current (A) 3/6 Airflow (m 3/hr) 390 Noise Level (d BA) 52 Effective Volume (m 3) 250 Min Operating Temp (°C) 3 Max Operating Temp (°C) 35 Water Extraction 30 litres per day at 30 degrees C 80% Relative Humidity Refrigerant R407c Weight 48kg Dimensions H945 x W545 x D492 mm  . ...
Archived Product
£1604.97
. The WM range of units is high capacity dehumidifiers made to operate at high efficiencies by removing moisture from the air through the refrigeration process. The fan draws the moist air through the cold evaporator coil which cools the air below its dew point. Moisture forms on the evaporator coil & is collected in the condensate tray equipped with an internal condensate pump to remove accumulated moisture easily. The cooled air then passes through the hot condenser coil. It is reheated using the same energy released during the cooling phase plus the additional heat generated by the compressor. Therefore the air is discharged from the dehumidifier at a slightly higher temperature with lower absolute humidity than entered. Continuous circulation of air through the dehumidifier gradually reduces the relative humidity within the area. Because the WM range of units is equipped with an internal humidistat they automatically switch on & off to save energy & expense by maintaining the desired humidity level with intermittent operation Features Voltage 230 Phase 1 Frequency (Hz) 50 Power (k W) 1.5 Current (A) 8 Airflow (m 3/hr) 580 Noise Level (dba) 58 Effective Volume (m 3) 300 Typical Extraction (l/d) 30 Min Operating Temp (°C) 3 Max Operating Temp (°C) 35.. ...
Archived Product
£1938.97
. The WM range of units is high capacity dehumidifiers made to operate at high efficiencies by removing moisture from the air through the refrigeration process. The fan draws the moist air through the cold evaporator coil which cools the air below its dew point. Moisture forms on the evaporator coil & is collected in the condensate tray equipped with an internal condensate pump to remove accumulated moisture easily. The cooled air then passes through the hot condenser coil. It is reheated using the same energy released during the cooling phase plus the additional heat generated by the compressor. Therefore the air is discharged from the dehumidifier at a slightly higher temperature with lower absolute humidity than entered. Continuous circulation of air through the dehumidifier gradually reduces the relative humidity within the area. Because the WM range of units is equipped with an internal humidistat they automatically switch on & off to save energy & expense by maintaining the desired humidity level with intermittent operation Features Voltage 230 Phase 1 Frequency (Hz) 50 Power (k W) 1.5 Current (A) 8 Airflow (m 3/hr) 580 Noise Level (dba) 58 Effective Volume (m 3) 300 Typical Extraction (l/d) 30 Min Operating Temp (°C) 3 Max Operating Temp (°C) 35.. ...
Archived Product
£1673.97
. The DD400 desiccant dehumidifier has a compact rugged lightweight design that facilitates one person's easy transportation & is easily accommodated within space-restricted areas. The unit incorporates a PTC Heater ensuring maximum drying is immediately reached & constantly maintained while running. The dual air inlet feature of the DD400 is ideal for installations where the regeneration supply air needs to be kept separate from the process supply air. In addition to the hours run meter which shows the unit running time an ammeter is also incorporated to monitor the units drying effectiveness. Manual / Automatic control is a standard feature within the DD range of desiccant dehumidifiers & a remote humidistat can quickly & easily be connected for automatic operation & control. The EIP range of DD desiccant dehumidifiers is all manufactured from high-grade stainless steel ensuring a rust-free product when used in the most severe applications. The spigot connectors allow quick & easy installation. All models incorporate a high efficiency patented PPS Rotor. This design

Includes::
an 82% active Silica Gel to ensure optimum performance over the equipment wide operating range of environments. All desiccant rotors supplied by EIPL are washable & designed for high performance / long life Features Voltage 230 Phase 1 Frequency (Hz) 50 Power (k W) 2.2 Current (A) 8 Process Airflow
- Dry Air (m 3/hr) 370 Regen Airflow
- Wet Air (m 3/hr) 150 Process Air Duct Size (mm) 130 Regen Air Duct Size
- Wet Air (mm) 100 Rotor Wheel Speed (rph) 20 Typical Extraction (l/d) 34 Min Operating Temp (°C) -20 Max Operating Temp (°C) 40..




...
Archived Product
£1063.97
. The EIPL CD85 commercial / industrial dehumidifier has been designed to provide energy-efficient humidity control in various applications including offices laboratories apartments storage areas restaurants bars museums locker rooms computers telecommunication rooms basements & crawl spaces. It is a quiet high efficiency a high capacity unit designed to suit your HVAC needs. The configurable inlet & outlet positions ensure flexibility for all applications. The CD85 incorporates a high capacity backwards curved fan making the product ideal for ducted installations. An Inlet air filter condensate pump & status panel are all standard with the CD85. The Hot Gas defrost system ensures quick & efficient clearing of ice from the coil allowing a minimum operating temperature of 3°CFeatures Voltage 230 Phase 1 Frequency (Hz) 50 Power (k W) 0.88 Current (A) 7 Airflow (m 3/hr) 120 Noise Level (dba) 57 Effective Volume (m 3) 237 Typical Extraction (l/d) 35 Min Operating Temp (°C) 3 Max Operating Temp (°C) 35.

Dimensions. W x D x H 600 x 345 x 400 mm Weight 33 kgs..

...
Archived Product

Ebac 30 Litre K100P Industrial Dehumidifier

. For use in commercial areas and large buildings the K100P is the ideal unit to control humidity and maintain desired conditions in your premises. With the capacity to extract up to 36 litres of moisture in 24 hours combined with a variable humidistat control the K100P will maintain conditions without worrying about excessive energy costs or over-drying. Installation is quick and easy simply position the unit connect to the mains supply connect the drain outlet to a suitable drainage point and switch On. The K100P is a free-standing unit and is supplied complete with a tubular Skid frame. However it could also be fitted to a wall mounting bracket which can be purchased separately. Alternatively a trolley frame is also available to allow easy manoeuvrability. The K100P range of
dehumidifiers incorporates a high lift condensate pump enabling the condensate pump to heights over 4mFeatures Voltage 230Phase 1Frequency(Hz) 50Power(kW) 1.5Current(A) 8Airflow(m3/hr) 510Noise Level(dba) 57Effective Volume(m3) 300Typical Extraction(l/d) 30Min Operating Temp (°C) 3Max OperatingTemp (°C) 35..
RIP - This product is no longer available on our network. It was last seen on 30.01.2025

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • Availability: Out Of Stock
  • Supplier: Aircon Direct
  • SKU: ACD_10241HZ-GB
Availability: In Stock
£1682.97

Product Description

. For use in commercial areas & large buildings the K100P is the ideal unit to control humidity & maintain desired conditions in your premises. With the capacity to extract up to 36 litres of moisture in 24 hours combined with a variable humidistat control the K100P will maintain conditions without worrying about excessive energy costs or over-drying. Installation is quick & easy simply position the unit connect to the mains supply connect the drain outlet to a suitable drainage point & switch On. The K100P is a free-standing unit & is supplied complete with a tubular Skid frame. However it could also be fitted to a wall mounting bracket which can be purchased separately. Alternatively a trolley frame is also available to allow easy manoeuvrability. The K100P range of dehumidifiers incorporates a high lift condensate pump enabling the condensate pump to heights over 4m Features Voltage 230 Phase 1 Frequency (Hz) 50 Power (k W) 1.5 Current (A) 8 Airflow (m 3/hr) 510 Noise Level (dba) 57 Effective Volume (m 3) 300 Typical Extraction (l/d) 30 Min Operating Temp (°C) 3 Max Operating Temp (°C) 35..

Reviews/Comments

Add New

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Litre - A unit of volume equivilent to 1000 Mililitres
Wall - A physical barrier between two areas
Quick - Something that is fast
Large - something that takes up more space than normal.
Voltage - A measurement of volts.
Ideal - Something that satisfies a perfect criteria.

Supplier Information

Aircon Direct
Page Updated: 2024-01-22 18:01:41

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu