The Zy XEL Po E12 Series is a Po E injector designed to support the increasing power demands of the latest-generation N wireless Access Points (APs) as well as the pan, tilt or zoom functions of IP surveillance cameras. The Po E12 Series consists of two models: Po E-12 & Po E12-HP. The Po E-12 & Po E12-HP are single-port Po E injectors that deliver both power & data to other Po E devices via a single CAT-5 Ethernet cable without extra power supply. The Po E-12 enables 100 Mbps data transmissions & provides power up to 15.4W, while the Po E12-HP allows data transmitted at 1000 Mbps & delivers power up to 30W. ...

The Zy XEL Po E12 Series is a Po E injector designed to support the increasing power demands of the latest-generation N wireless Access Points (APs) as well as the pan, tilt or zoom functions of IP surveillance cameras. The Po E12 Series consists of two models: Po E-12 & Po E12-HP. The Po E-12 & Po E12-HP are single-port Po E injectors that deliver both power & data to other Po E devices via a single CAT-5 Ethernet cable without extra power supply. The Po E-12 enables 100 Mbps data transmissions & provides power up to 15.4W, while the Po E12-HP allows data transmitted at 1000 Mbps & delivers power up to 30W. Feature Feature Value Ethernet interface type Gigabit Ethernet Ethernet LAN data rates 10, 100, 1000 Mbit/s Compliance industry standards 802.3at Cabling technology 10/100/1000 Base-TPower over Ethernet (Po E)YLED indicators Y Safety EN 60950-1, CSA, EU Ro HSCertification FCC Part 15 (Class B)n CE EMC (Class B) Ethernet LAN (RJ-45) ports 2 Input voltage 100
- 240 VInput frequency 50 / 60 Hz Input current 1.5 APower consumption (typical)42.1 WOperating temperature (T-T)0
- 50 &176;COperating relative humidity (H-H)10
- 95% Storage temperature (T-T)-40
- 70 &176;CStorage relative humidity (H-H)5
- 95% Weight 396 g Dimensions (Wx Dx H)155 x 74 x 36 mm Package length 15.5 cm Package width 202 mm Package height 69 mm




...

12-port Gb E Managed Po E Switch\n\n Along with the complete commercial product portfolio that offers customers with total network solutions, Zyxel introduces the new RGS Series of Po E switches with ruggedized design concepts to meet stringent outdoor or harsh network deployment scenarios. The special mechanism enables RGS200-12P to operate in outdoor, factory or other harsh environments for surveillance. In addition, it is also easy to manage RGS200-12P through a user-friendly Webbased GUI.\n\n Benefits\n\n Rugged & reliable design for harsh environments\n Equipped with fanless & IP30 standard metal mechanism, the Zyxel RGS200-12P is able to deliver great thermal control & tolerate the dustiest deployments with ease, whether installed on a DIN rail or wall mounted for the most efficient use of cabinet space. Designed to handle temperatures ranging from -40&176;C to 75&176;C, the RGS200-12P can be placed in a variety of challenging environments & be adapted to broad range of field applications. When switching is applied normally in outdoor settings, ESD (electrostatic discharge), DC & Ethernet surge protection prevent the loss of business revenue & productivity due to damage or fatigue caused by power disturbances.\n\n Quick failover for stable connectivity\n When deployed in harsher conditions, such as factory or outdoor settings, the Zyxel RGS200-12P creates fault-tolerant networks with redundant ring technology & rapid self-recovery capability to prevent interruptions. In the event of downtime caused by a network error, the rapid failover will restore normal operation in less than 20 ms. The switch&153;s dual DC power inputs & reverse power protection feature ensure continuous uptime & reliable operation.\n\n Trouble-free installation & easy extendibility\n This rugged L2 Managed Po E switch comes with eight (8) 10/100/1000 Base-T copper Po E ports & four (4) 100/1000-Base-X SFP fiber interfaces. The switch also supports the 802.3at Po E plus standard, with each Po E port providing up to 30 W of power to efficiently accommodate the most power-hungry devices. The fiber uplink can extend the network to long-distance nodes up to 40 km (43, 744 yards) away for added flexibility. Feature Feature Value Switch type Managed Switch layer L2 Quality of Service (Qo S) support Y Web-based management YARP inspection Y System event log YMIB support RFC 2233 IF MIB, RFC1213 MIB II, RFC 1757 RMON 1/2/3/9, RFC1215, RFC1493, RFC 2674, LLDP-EXT-MED MIBBasic switching RJ-45 Ethernet ports quantity 8 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)SFP module slots quantity 4 Fiber optic connector SFPNetworking standards IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z 10G support N Copper ethernet cabling technology 10BASE-T, 100BASE-TX, 1000BASE-TPort mirroring Y Full duplex Y Flow control support Y Link aggregation Y Broadcast storm control Y Rate limiting Y Auto-negotiation YVLAN support Y Virtual LAN features Tagged VLANNumber of VLANs 1024 Fiber ethernet cabling technology 1000BASE-XTransmission distance (max)40 km MAC address table 8000 entries Switching capacity 24 Gbit/s Throughput 17.86 Mpps Store-&-forward Y Number of queues 8 Jumbo frames support Y Jumbo frames 9000 Packet buffer memory 0.5 MBAccess Control List (ACL)YIGMP snooping Y Security algorithms 802.1x RADIUS, HTTPS, SNMP, SSH-2MAC address filtering YSSH/SSL support Y Authentication Guest VLAN, MAC-based authentication, Port-based authentication Multicast support Y Rack mounting Y Product colour Black Housing material Metal International Protection (IP) code IP30 Wall mountable YDIN rail mounting Y Firmware upgradeable Y Buffer size 512 KBPlug & Play Y Mean time between failures (MTBF)568430 h DC input voltage 12
- 58 VPower consumption (max)255 WPower over Ethernet (Po E)YPower over Ethernet plus (Po E+) ports quantity 8 Total Power over Ethernet (Po E) budget 240 WOperating temperature (T-T)-40
- 75 &176;CStorage temperature (T-T)-40
- 85 &176;COperating relative humidity (H-H)5
- 95% Storage relative humidity (H-H)5
- 90% Heat dissipation 86955 BTU/h Width 77 mm Depth 127.3 mm Height 154 mm Weight 1.45kg Wall mounting kit Y Rack mount kit Y Package width 133 mm Package depth 192 mm Package height 238 mm Package weight 1.9kg Input voltage 12
- 58 V





...

12-port Gb E Managed Po E Switch\n\n Along with the complete commercial product portfolio that offers customers with total network solutions, Zyxel introduces the new RGS Series of Po E switches with ruggedized design concepts to meet stringent outdoor or harsh network deployment scenarios. The special mechanism enables RGS200-12P to operate in outdoor, factory or other harsh environments for surveillance. In addition, it is also easy to manage RGS200-12P through a user-friendly Webbased GUI.\n\n Benefits\n\n Rugged & reliable design for harsh environments\n Equipped with fanless & IP30 standard metal mechanism, the Zyxel RGS200-12P is able to deliver great thermal control & tolerate the dustiest deployments with ease, whether installed on a DIN rail or wall mounted for the most efficient use of cabinet space. Designed to handle temperatures ranging from -40&176;C to 75&176;C, the RGS200-12P can be placed in a variety of challenging environments & be adapted to broad range of field applications. When switching is applied normally in outdoor settings, ESD (electrostatic discharge), DC & Ethernet surge protection prevent the loss of business revenue & productivity due to damage or fatigue caused by power disturbances.\n\n Quick failover for stable connectivity\n When deployed in harsher conditions, such as factory or outdoor settings, the Zyxel RGS200-12P creates fault-tolerant networks with redundant ring technology & rapid self-recovery capability to prevent interruptions. In the event of downtime caused by a network error, the rapid failover will restore normal operation in less than 20 ms. The switch&153;s dual DC power inputs & reverse power protection feature ensure continuous uptime & reliable operation.\n\n Trouble-free installation & easy extendibility\n This rugged L2 Managed Po E switch comes with eight (8) 10/100/1000 Base-T copper Po E ports & four (4) 100/1000-Base-X SFP fiber interfaces. The switch also supports the 802.3at Po E plus standard, with each Po E port providing up to 30 W of power to efficiently accommodate the most power-hungry devices. The fiber uplink can extend the network to long-distance nodes up to 40 km (43, 744 yards) away for added flexibility. Feature Feature Value Switch type Managed Switch layer L2 Quality of Service (Qo S) support Y Web-based management YARP inspection Y System event log YMIB support RFC 2233 IF MIB, RFC1213 MIB II, RFC 1757 RMON 1/2/3/9, RFC1215, RFC1493, RFC 2674, LLDP-EXT-MED MIBBasic switching RJ-45 Ethernet ports quantity 8 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)SFP module slots quantity 4 Fiber optic connector SFPNetworking standards IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z 10G support N Copper ethernet cabling technology 10BASE-T, 100BASE-TX, 1000BASE-TPort mirroring Y Full duplex Y Flow control support Y Link aggregation Y Broadcast storm control Y Rate limiting Y Auto-negotiation YVLAN support Y Virtual LAN features Tagged VLANNumber of VLANs 1024 Fiber ethernet cabling technology 1000BASE-XTransmission distance (max)40 km MAC address table 8000 entries Switching capacity 24 Gbit/s Throughput 17.86 Mpps Store-&-forward Y Number of queues 8 Jumbo frames support Y Jumbo frames 9000 Packet buffer memory 0.5 MBAccess Control List (ACL)YIGMP snooping Y Security algorithms 802.1x RADIUS, HTTPS, SNMP, SSH-2MAC address filtering YSSH/SSL support Y Authentication Guest VLAN, MAC-based authentication, Port-based authentication Multicast support Y Rack mounting Y Product colour Black Housing material Metal International Protection (IP) code IP30 Wall mountable YDIN rail mounting Y Firmware upgradeable Y Buffer size 512 KBPlug & Play Y Mean time between failures (MTBF)568430 h DC input voltage 12
- 58 VPower consumption (max)255 WPower over Ethernet (Po E)YPower over Ethernet plus (Po E+) ports quantity 8 Total Power over Ethernet (Po E) budget 240 WOperating temperature (T-T)-40
- 75 &176;CStorage temperature (T-T)-40
- 85 &176;COperating relative humidity (H-H)5
- 95% Storage relative humidity (H-H)5
- 90% Heat dissipation 86955 BTU/h Width 77 mm Depth 127.3 mm Height 154 mm Weight 1.45kg Wall mounting kit Y Rack mount kit Y Package width 133 mm Package depth 192 mm Package height 238 mm Package weight 1.9kg Input voltage 12
- 58 V





...

Robust firewall & VPN to secure business communications The Zy XEL SBG3300-N Series applies ACL rules, Stateful Packet Inspection (SPI), Denial of Service (Do S) & DDo S features for first-line defense against hackers, network intruders & other harmful threats. A configurable DMZ provides more flexible accessibility while preventing external attacks on confidential databases. The SBG3300-N Series in addition features IPSec VPN which empowers companies to provide secure connections to branch offices, partners, road warriors & telecommuters. They can use L2TP or PPTP VPN to safely access corporate networks without having to install VPN software. Multi-WAN connectivity with load balancing & failover The Zy XEL SBG3300-N Series

Includes:: multiple WAN interfaces for DSL, Ethernet & USB (Universal Serial Bus) 3G/4G adapters to establish WAN backups or load balancing. The WAN backup provides contingency in case the primary line or ISP suffers temporary outage. When the primary line of normal services is restored, all traffic resumes normal activity. This function enables highly reliable connectivity & flexibility in multiple applications. Comprehensive authentication for safe, efficient management The Zy XEL SBG3300-N Series offers a two-level login mechanism to differentiate user segments. The ISP can also define the policies for the limited accounts to easily manage them with the integrated profile database. 11n for superior performance & coverage The Zy XEL SBG3300-N Series Wireless N VDSL2 Combo WAN Small Business Security Gateway featuring 802.11n technology provides the ultimate solution for exceptional security, speed, & coverage. The SBG3300-N Series offers a Web authentication portal for easy management of Internet access. Multiple SSIDs & guest/limited wireless accounts allow companies to protect sensitive data by separating public Internet access from a company′s private LAN. With the guest SSID feature, it′s easy to share wireless connectivity without compromising security; guests are allowed to access only unsecured data.

...

SFP ports mean flexibility. The flexibility to choose which fiber you want to run & what sort of distance you need. They save money by allowing you to use existing fiber so you don&153;t have to run more. Instead of buying a switch with built-in fiber ports, buy a switch with SFP ports that means that you can choose what type of fiber transceiver you want to use on a port-by-port basis.\n- Gigabit Performance Transmission & Flexibility\n- Small Size & High Port Density\n- Industry Standard-based Compliance\n\n Gigabit Speed & Flexibility\n Zy XEL's Small Form-factor Pluggable (SFP) transceiver family provides performance & flexibility with full duplex Gigabit speeds & hot-pluggable into Gigabit Ethernet port.\n \n Small Size & High Port Density\n Zy XEL's SFP transceiver's compact design provides high port density. For example, Zy XEL GS-3012F switch can connect up to 12 fiber links
- all at an affordable price.\n \n Industry Standards-based Compliance\n Zy XEL's SFP transceiver family is compliant with IEEE 802.3z & SFP MSA allowing easy interoperability with all standard compliance devices from different vendors. Feature Feature Value Maximum data transfer rate 1000 Mbit/s Cabling technology 1000 Base-LHXMaximum transfer distance 550 m Wavelength 1310 nm Compliance industry standards IEEE 802.3z Safety Class 1 Laser, CSA, TUV, 21 CFR 1040.10 & 1040.11 Width 56 mm Depth 13.4 mm Height 12.5 mm Operating temperature (T-T)0
- 70 &176;CStorage temperature (T-T)-40
- 85 &176;COperating relative humidity (H-H)5
- 95% Dimensions (Wx Dx H)56 x 13.4 x 12.46 mm Interface SFPForm factor Plug-in Connector (s)LCPower requirements+3.3 V Fiber type SMF (9/10um)



...

'- Hot-Pluggable with Maximum Flexibility\n- Low Power Dissipation\n- Industry Standard Compliance\n- SFP MSA (Multi-Source Agreement) Compliance\n- Compact Size, High Port Density Feature Feature Value Maximum data transfer rate 10000 Mbit/s Interface type SFP+ Fiber optic connector SFP+ Maximum transfer distance 300 m Fiber ports quantity 2 Hot-Plug support Y Width 14.8 mm Depth 56.5 mm Height 11.8 mm Weight 20 g Number of products included 1 pc (s) ...

'- Hot-Pluggable with Maximum Flexibility\n- Low Power Dissipation\n- Industry Standard Compliance\n- SFP MSA (Multi-Source Agreement) Compliance\n- Compact Size, High Port Density Feature Feature Value Maximum data transfer rate 10000 Mbit/s Interface type SFP+ Fiber optic connector SFP+ Maximum transfer distance 300 m Fiber ports quantity 2 Hot-Plug support Y Width 14.8 mm Depth 56.5 mm Height 11.8 mm Weight 20 g Number of products included 1 pc (s) ...

'- Hot-Pluggable with Maximum Flexibility\n- Low Power Dissipation\n- Industry Standard Compliance\n- SFP MSA (Multi-Source Agreement) Compliance\n- Compact Size, High Port Density Feature Feature Value Maximum data transfer rate 10000 Mbit/s Interface type SFP+ Fiber optic connector SFP+ Maximum transfer distance 10000 m Fiber ports quantity 2 Hot-Plug support Y Width 14.8 mm Depth 56.5 mm Height 11.8 mm Weight 20 g Number of products included 1 pc (s) ...

Zy XEL SP300E. Type: POS, Print technology: Thermal, Print speed: 25.4 mm/sec. Maximum roll diameter: 63 mm, Supported paper



...