United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Test & Measure > Stud & Metal
Archived Product
-
Bosch D-Tect 150
Professional Wallscanner
Detector The future of
detection technology -
Precision of the highest
order. The specialist for
all professionals who
wish to avoid
accidentally striking
unwanted objects when
drilling. Features: Ultra
wideband radar sensor
system for detection
accurate to the
millimetre of
ferrous/non-ferrous
metals, electrical
cables, wooden beams and
plastic pipes such as
floor and wall heating
pipes Precise detection
of rebar in concrete up
to 15 cm deep Digital
display of material
properties and maximum
permitted drilling depth
Four different types of
sensors for maximum
safety. Detection of all
materialsMetal, Wood,
AC, Plastic Material
classification and
digital drilling depth
indication for highest
safety Calibration free -
ready anytime Small &
ergonomic design Maximum
detection depth of 15cm
Large, illuminated
display - Easy to read
and interpret Intuitive
user interface in 7
languages with
self-explanatory
detection modes Robust:
protected against dust
and water (IP 54). Drop
tested up to 1m. For
reliable usage on every
jobsite Modes: Mode
Detects Does not detect
Max. detection depth
Universal mode(Default)
Metal, AC,
plasticpipes, cavities
Wood, cavities, empty
plastic pipes < 20mm
diameter 60mm Concrete
deep Metal, AC,
plasticpipes, cavities
Wood, cavities, empty
plastic pipes < 20mm
diameter 150mm Panel
heating Filled metal-
andplastic pipes, AC,
cavities Empty plastic
pipes 80mm Dry wall Wood,
Metal, AC, filled
plastic pipes, cavities
Empty plastic pipes 60mm
Hollow block Metal, AC,
plasticpipes Cavities,
empty plastic pipes <
20mm diameter 60mm Comes
with: 4 batteries
Protective case
[http://www.youtube.com/watch?v=w48r-c4i22c]
Detectable materials:
Plastic pipes, ferrous
metals, non-ferrous
metals, wooden
substructures, live
cables Maximum measuring
depth: 15cm Accuracy of
object center (a):
Availability: In Stock
£449.00
Archived Product
-
Bosch D-Tect 150 SV
Wallscanner, complete
with protective case and
4 batteries The Bosch
D-TECT150SV is a
professional detector for
locating various cables
and materials in wet or
dry concrete up to 15cm
deep Features: Ultra
wideband radar sensor
system for
millimetre-accurate
detection of
ferrous/non-ferrous
metals, live cables,
wooden beams and plastic
pipes such as floor and
wall heating pipes
Precise detection of
rebar in concrete and in
damp concrete up to 15 cm
deep Digital display of
material properties and
object depth Signal view
for detecting objects in
particularly complex
material structures
Signal view for precise
detection of objects that
are very close to each
other Detectable
materials: Plastic pipes
Ferrous metals
Non-ferrous metals Wooden
substructures Live cables
Comes With: Durable
protective case Batteries
Max. detection depth 150
mm Accuracy
Availability: In Stock
£629.00
Archived Product
-
Zircon Z63739 Studsensor
Edge Features: The maker
of the original
StudSensor is now taking
stud finding to the next
generation. First in a
new line of product
overhauls the StudSensor
EDGE is a complete
redesign of Zircons most
popular tool Its new
patent-pending pinch grip
design features a body
molded specifically to
fit comfortably in the
palm of your hand The end
result is a secure hold
in either hand at any
angle providing a new
level of ease comfort and
utility to the user The
EDGE also features a
user-friendly interface
and improved SpotLite
Availability: In Stock
£14.00
Archived Product
-
Stanley Intelli Tools
FMHT0-77407 Stud Finder
300 The Stud Sensor 300
uses electronic signals
to locate the center of
studs, joistsor live AC
wires through drywall or
other common building
materials. Oncethe center
of a stud has been
detected in one pass
across the surface,
theStud Sensor 300 gives
a visual display and
sounds an audible tone. A
markingchannel allows you
to easily note the stud
center and edges on the
wall.The Stud Sensor 300
will not detect objects
in concrete, mortar,
block or brickwork,
carpeting, foil faced
materials, metallic
surfaces or ceramic
tiles. TheStud Sensor 300
is not designed to locate
non-ferrous or plastic
objects suchas pipes
Features: Backlit LCD
screen clearly displays
all of the sensor's
readings, even in low
light conditions Wood and
metal stud detection
through up to 1-1/2
" deep surface
material AC detection
identifies live wires up
to 2" deep
OnePass™ center-find
technology locates stud
centers Deep metal scan
senses metal through up
to 3" of material
Auto-calibration Marking
channel improves accuracy
of marking-out readings
New ergonomic design,
and soft grips provide
comfort and control of
the tool At 35-55%
relative humidity)
Battery 9 volt (not
included) Depth Range:
Wood or Metal Studs Up to
1-1/2" (38 mm)
through drywall Live AC
Wires (120 volts AC) Up
to 2"(50 mm) through
drywall METAL SCAN Mode
Up to 3" (76 mm)
through drywall Accuracy
- Stud Center Wood
Availability: In Stock
£30.00
Archived Product
-
Stanley Intelli Tools
STHT0-77403 Stud Finder
100 The Stud Sensor 100
uses electronic signals
to locate the edges of
studs, joists or live AC
wires through drywall or
other common building
materials. Once the edge
of a stud has been
detected, the Stud
Sensor 100 displays red
LED's and sounds in
audible tone. A marking
channel allows you to
easily note the stud
edges on the wall.
Powered by a 9 Volt
Battery which is not
included. Features: Wood
and metal stud detection
through up to 3/4"
deep surface material AC
detection identifies live
wires up to 2" deep
Sequential LEDs and
audible beeps indicate
reading Marking channel
with LED identifies
target and makes marking
surfaces easy and
accurate New ergonomic
design, and soft grip
buttons provide comfort
and control of the tool
 Battery 9 volt (not
included) (At 35-55%
relative humidity) Depth
Range - Wood or Metal
Studs Up to
Availability: In Stock
£12.00
Archived Product
-
Bosch D-Tect 150
Professional Wallscanner
Detector The future of
detection technology -
Precision of the highest
order. The specialist for
all professionals who
wish to avoid
accidentally striking
unwanted objects when
drilling. Features: Ultra
wideband radar sensor
system for detection
accurate to the
millimetre of
ferrous/non-ferrous
metals, electrical
cables, wooden beams and
plastic pipes such as
floor and wall heating
pipes Precise detection
of rebar in concrete up
to 15 cm deep Digital
display of material
properties and maximum
permitted drilling depth
Four different types of
sensors for maximum
safety. Detection of all
materialsMetal, Wood,
AC, Plastic Material
classification and
digital drilling depth
indication for highest
safety Calibration free -
ready anytime Small &
ergonomic design Maximum
detection depth of 15cm
Large, illuminated
display - Easy to read
and interpret Intuitive
user interface in 7
languages with
self-explanatory
detection modes Robust:
protected against dust
and water (IP 54). Drop
tested up to 1m. For
reliable usage on every
jobsite Modes: Mode
Detects Does not detect
Max. detection depth
Universal mode(Default)
Metal, AC,
plasticpipes, cavities
Wood, cavities, empty
plastic pipes < 20mm
diameter 60mm Concrete
deep Metal, AC,
plasticpipes, cavities
Wood, cavities, empty
plastic pipes < 20mm
diameter 150mm Panel
heating Filled metal-
andplastic pipes, AC,
cavities Empty plastic
pipes 80mm Dry wall Wood,
Metal, AC, filled
plastic pipes, cavities
Empty plastic pipes 60mm
Hollow block Metal, AC,
plasticpipes Cavities,
empty plastic pipes <
20mm diameter 60mm Comes
with: 4 batteries
Protective case
[http://www.youtube.com/watch?v=w48r-c4i22c]
Detectable materials:
Plastic pipes, ferrous
metals, non-ferrous
metals, wooden
substructures, live
cables Maximum measuring
depth: 15cm Accuracy of
object center (a):
Availability: In Stock
£530.00
Archived Product
-
Zircon Z63969 Studsensor
E50 Electronic Stud
Finder The StudSensor E50
quickly and easily
locates the edges of wood
and metal studs and
joists behind walls
floors and ceilings. Its
easy-to-read display
screen indicates stud
edges the patented
SpotLite
Availability: In Stock
£24.00
Archived Product
-
Bosch GMS 120
Professional Multi
Material Cable Detector,
complete with Protective
Bag The Bosch GMS120 is a
wallscanner with
multi-mode detection -
for detection of wood
studs, metal objects
(rebar, studs and
steel/copper pipes) or
live wiring. This machine
has a reputation for
being best in class of
the smaller hand held
detectors on the market
and is at a very
competitive price point.
Simple and intuitive to
use, it works accurately
too. Features: The most
reliable multi-detector
in its class Maximum
reliability, all objects
are found and application
errors are avoided due to
the automatic calibration
Reliable detection even
of deep-lying objects -
up to a depth of 12 cm
Even more reliable
detection of objects due
to three-colour LED
luminous ring Pinpoint
indication of the
object's centre with the
"Center Finder"
scale Better visibility
of the result due to
illuminated display
Marking hole with LED
luminous ring Comes with:
Protective bag Hand strap
1 x 9 V 6LR61 Block
[http://www.youtube.com/watch?v=o64ZJNvk758]
Find out more in our
GMS120 blog post
Detectable materials:
Electrical cables,
metals, wooden
substructures Max.
detection depth: 120 mm
Detection depth, steel,
max: 120 mm Detection
depth, copper, max: 80
mm Automatic deactivation
facility, approx: 5 min
Display backlight: Yes
Acoustic signal: Yes
Dimensions: 200
Availability: In Stock
£79.00
Available
-
Sealey AK2018 3-in-1
Metal, Voltage & Stud
Detector With over 34
years experience in the
industry Sealey is a
ideal choice of the
professional. The range
is so vast that it covers
a wide range of markets
and applications.
Features: Combined unit
to accurately detect live
or dead electricity
cables, water or gas
pipes and wooden studs or
battens with ease Powered
by a 9V cell (supplied)
the detector will, with
a red and green LED
display and an audible
signal, show the
presence of metal,
electricity and wooden
studs or battens Comes
With: 1 Year Warranty
Supplied with full
instructions
Availability: In Stock
£19.00
Denmark