United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Test & Measure > Electrical Testers
Available
-
Sealey TA120 Current
Tester 20A - Standard
Fuse Features: Fast,
accurate and safe current
measurement at the fuse
box Ideal for
fault-finding on car and
commercial vehicle
electrical circuits Large
LCD display Plugs
straight into the
vehicle's fuse board
Model No: TA120 Range:
0-20A - 0-48V Accuracy:
Availability: In Stock
£8.00
Archived Product
-
Eclipse EVS1000 Voltage
Sensor 80 - 1000 Volts
For safely checking the
presence of voltage in
cables, wall sockets,
fuses, circuit breakers
and junction boxes. Can
pick up a 5 volt signal &
detect 240V through an
air gap of 4mm. Runs on 2
x AAA Batteries which are
not included. Features:
When the tip is placed
closed to AC voltage it
lights up in red and a
detection buzzer sounds
Pocket clip enables
convenient storage
Over-voltage CAT III and
compliance with IEC 1010
Part No: EVS1000 Range:
80 - 1000 Volts Power
Requirements: 2 x AAA
Batteries (not included)
Operating Temperature:
-20
Availability: In Stock
£10.00
Archived Product
-
Martindale RC2000 RCD
Tester complete with
Carrying Case, Mains
Test Lead and User Manual
The Martindale RC2000 RCD
Tester is ideal for
testing common RCDs up to
500mA. RCD rating is
selected via the rotary
dial, and three
different test modes are
available - Full, Half &
Fast Test, at either 0
Availability: In Stock
£264.95
Archived Product
-
Fluke 2AC VoltAlert
Voltage Detector
(3611985) The 2AC is the
latest addition to the
VoltAlert AC non-contact
voltage tester family
from Fluke and is
designed to be
pocket-sized and easy to
use. The 2AC tests for
energized circuits and
defective grounds,
whether it's for an
electrician on the
factory floor or the
do-it-yourselfer around
the house. The tip of the
pocket-sized tester will
glow red when within
close proximity of an
outlet, terminal strip,
or power cord where
voltage is present.
Features: Voltage
detection from 200 to
1000 V ac, suitable for
a wide range of
residential, commercial
and industrial needs.
NEW! Always on, using
special low power
circuitry to sustain
battery life and ensure
your 2AC is always ready.
NEW! Innovative 'Battery
Check' button function
ensures battery is in
good condition* Category
IV - 1000 V overvoltage
rated product for best in
class user protection
Integrated clip design,
optimized for pocket
storage Powered by 2x AAA
batteries (included)
Fluke ruggedness and
reliability
Availability: In Stock
£25.00
Archived Product
-
Fluke 1AC-II VoltAlert
Voltage Detector
(2432971) The Fluke
1AC-II is part of the
next generation of
VoltAlert AC non-contact
voltage testers from
Fluke which are easy to
use. It senses the steady
state electrostatic
field produced by ac
voltage through
insulation without
requiring contact to the
bare conductor. A red
glow at the tip and a
beeping noise (if not
switched OFF) indicates
the presence of voltage.
Electricians,
maintenance, service,
safety personnel, and
homeowners can quickly
test for energized
circuits in the workplace
or at home. Features:
Voltbeat technology and
continuous self-test so
you always know it's
working Upon detection,
tip glows and beeper
sounds CAT IV 1000 V for
added protection 200 V to
1000 V AC 2 AAA alkaline
batteries included
Voltage sensing ranges:
Nominally, 90 V AC to
1000 V AC or 200 V AC to
1000 V AC depending on
model, 45 Hz to 405 Hz;
also a 20 V to 90 V
control circuit model
Detector tip style: Blade
or round, depending on
model Light source: One
high intensity red LED
Agency Approvals: c CSA
us, CE, C-Tick Safety
Rating: 1000 V, CAT IV
IP Rating: IP 40
Operating Temperature:
-10
Availability: In Stock
£29.00
Archived Product
-
Martindale VIPDLOK
Voltage Indicator,
Proving Device & Lock Out
Kit The complete solution
for safe isolation, the
Martindale VIPD Lock Out
Kit contains the
VI13700/2 voltage
indicator, PD440 proving
device, along with a
complete lock out kit
Features: The complete
solution for safe
isolation Contains the
VI13700/2 voltage
indicator, PD440 proving
device, along with a
complete lock out kit
Nothing is more dangerous
than trusting a defective
voltage indicator to test
for a dead circuit - Safe
electrical work requires
the use of a voltage
indicator that has been
proved with a proving
unit before and after use
Kit enables you to comply
with health and safety
recommendations for safe
working The 16 piece kit
contains the following
items: 1 x PD440 proving
device 1 x VI13770
voltage indicator 1 x
Padlock with unique key 1
x Steel safety hasp,
with space for up to 6
padlocks 1 x Green mini
MCB lock 1 x Yellow mini
MCB lock 1 x Blue medium
MCB lock 1 x Large red
MCB lock 1 x Red fuse
lockout breaker 5 x
Danger tags which can be
overwritten 1 x Black
marker for writing on
Danger tags 1 x TC55 soft
carry case ELECTRICAL
SPECIFICATIONS: Nominal
voltage range: 50 - 600V
DC/AC rms Nominal voltage
threshold indications:
50, 100, 200, 400 V
DC/AC rms Nominal Voltage
threshold tolerance: <
85% of marked threshold
indication Polarity
indication: from approx
12V DC/AC rms AC/DC
voltage detection:
automatic Range
detection: automatic
Response time: < 0.1s
Frequency range: DC, 1 -
400 Hz Test current: <
3.5mA at 600V DC/AC rms
Duty ratio: 30s ON
(operated) / 240s OFF
(recovery) GENERAL
SPECIFICATIONS:
Operating: -10
Availability: In Stock
£189.95
Archived Product
-
Martindale FD500 Standard
Fuse Finder complete with
Receiver Unit and
Transmitter Unit The
analogue Martindale Fuse
Finder Kit FD500 finds
which fuse or breaker
controls a circuit
Features: Enables tracing
from socket to socket on
a circuit The transmitter
(FD500/T) takes its power
from the mains and emits
a signal which the
adjustable sensitivity
receiver (FD500/R) can
pick up This combination
can easily distinguish
the appropriate circuit,
even on a crowded fuse
board Sensitive analogue
adjustment by thumb wheel
finds the right breaker
rapidly EMC compliant
Designed for use at mains
sockets only Comes with:
Receiver unit Transmitter
unit Receiver: Mains
supply: 240V, 30-70 Hz
Transmit signal: approx
5Hz, 20A (max) pulse of
1.7us width Temperature
range: -10 degrees - 40
degrees at max 60% RH
Earth leakage: Nil Power
consumption: Approx 1W
Overvoltage: CAT III/300V
Protection class: IP20
Dimensions: 65 x 65 x
46mm approx Weight: 60g
Transmitter: Tracing
depth: 0 - 10cm for fuse
assignment (depending on
local conditions)
Sensitivity control:
Rotary thumbwheel on the
housing Temperature
range: -10 degrees to 40
degrees at max 60% RH
Protection class: IP20
Supply: 9V battery,
MN1604/PP3, IEC 6LA61
(alkaline only) - not
supplied Dimensions: 160
x 55 x 30mm Weight: 135g
approx EMC compliant
**For Further Technical
Specification Please
Refer To Attachments
Below**
Availability: In Stock
£50.00
Archived Product
-
Eclipse 3210R Electrician
Mains Tester 105mm For
detecting the presence of
electric voltage. The
3210R is packed in a
printed skin sheath.
Features: Chrome vanadium
steel bar for strength
and rust protection
220-250 volts: 50Hz
Model: 3210R Blade
Length: 105mm Total
Length: 190mm Tip: 3.5mm
Type: 220-250 volts: 50Hz
Weight: 0.1kg
Availability: In Stock
£4.00
Available
-
Sealey PPX Auto Probe
Plus 6-24 Volt Features:
All the features of the
Auto Probe but with an
integral work light to
aid use in dark engine
bays plus an audible
circuit tester for when
the LED on the probe
cannot be seen A
brilliant tool for the
auto electrician and
mechanic Carry out the
following tests on
systems from 6V up to 24V
quickly and efficiently:
Polarity test Power up
components prior to
fitting including: »
Cooling fan motors »
Fuel pumps »
Window/Sunroof motors »
Relays and Lamps » Wiper
motors Tests continuity
in: » Switches » Diodes
and Fuses » Relays »
Wiring harnesses Detect
short circuits. Locate
bad earths quickly Fitted
with a sensitive short
circuit protection device
Safe to use around
vehicle's electronic
management systems Power
switch self test means no
need to: » Double check
your circuit, tester on
the vehicle's battery. »
Reconnect hook-up clips
to test polarity. »
Search for earth points.
» Burn out fuses
locating faults. » Run
voltage drop tests Comes
With: 4.5 metre cable
allowing access to the
rear of the vehicle
Instruction guide
Availability: In Stock
£19.00
Archived Product
-
Fluke T6-1000 Electrical
Tester with FieldSense
Voltage and current
measurement capture is
traditionally
time-consuming and can be
risky. The latest
Electrical Testers
provide a faster and
safer method for testing
distribution panels,
junction boxes and other
equipment. These tools
sense an electrical field
in the open fork,
letting you take
measurements with ease.
FieldSense technology in
our T6 makes for faster,
safer work. You save a
complete step by
measuring voltage and
current at the same time.
Measure voltage up to
1000 V ac through the
open fork, without test
lead contact to live
voltage.+ Without opening
covers or removing wire
nuts. On wires up to AWG
4/0 (120 mm2), carrying
as much as 200 A. It will
change your job. Safer.
Faster. Easier. Features:
FieldSense technology for
ac voltage, current and
frequency measurement
without making electrical
contact to live voltage+
Simultaneous voltage and
current display - shows
all power supply
measurements at a glance
for efficient trouble
shooting 1 to 1000 V ac
or dc 0.1 to 200 A ac
True-rms voltage and
current Resistance 1 Ω
to 100 kΩ Frequency
measurement 45 Hz to 66
Hz Works with wires up to
AWG 4/0 (120 mm2) with a
17.8 mm jaw opening HOLD
button temporarily
freezes the reading for
easy viewing Easy to read
display with backlight
Accepts optional Fluke
TPAK Magnetic Meter
Hanger for convenient
operation Function
Requirestest leads Range
Resolution Accuracy[1]
FieldSenseac voltage
True-rms No 1000 V 1 V
Availability: In Stock
£215.00
Archived Product
-
Eclipse 3200R Electrician
Mains Tester 75mm For
detecting the presence of
electric voltage. The
3200R is packed in a
printed skin sheath.
Features: Chrome vanadium
steel bar for strength
and rust protection
220-250 volts: 50Hz
Model: 3200R Blade
Length: 75mm Total
Length: 145mm Tip: 3mm
Type: 220-250 volts: 50Hz
Weight: 0.1kg
Availability: In Stock
£3.00
Available
-
Sealey BT91/7 Battery
Drop Tester 6 - 12 Volts
Suitable for testing both
6 Volt and 12 Volt
batteries. Identifies
problem batteries fast.
Supplied with heavy duty
cables. Durable metal
outer casing with moving
coil meter. Features:
American style drop
tester. Load applied by
internal switchgear - no
sparking Suitable for 6
and 12V batteries.
Applies load across cells
and measures output on
meter. Accurate
indication of battery
voltage, faulty cell and
short circuited cell.
Comes With: 1 Year
Warranty
Availability: In Stock
£29.00
Archived Product
-
Fluke T6-600 Electrical
Tester with FieldSense
Voltage and current
measurement capture is
traditionally
time-consuming and can be
risky. The latest
Electrical Testers
provide a faster and
safer method for testing
distribution panels,
junction boxes and other
equipment. These tools
sense an electrical field
in the open fork,
letting you take
measurements with ease.
FieldSense technology in
our T6 makes for faster,
safer work. You save a
complete step by
measuring voltage and
current at the same time.
Measure voltage up to 600
V ac through the open
fork, without test lead
contact to live voltage.+
Without opening covers or
removing wire nuts. On
wires up to AWG 4/0 (120
mm2), carrying as much
as 200 A. It will change
your job. Safer. Faster.
Easier. Features:
FieldSense technology for
ac voltage, current and
frequency measurement
without making electrical
contact to live voltage+
1 to 600 V ac 0.1 to 200
A ac True-rms voltage and
current Resistance 1 Ω
to 2000 Ω Works with
wires up to AWG 4/0 (120
mm2) with a 17.8 mm jaw
opening HOLD button
temporarily freezes the
reading for easy viewing
Easy to read display with
backlight Accepts
optional Fluke TPAK
Magnetic Meter Hanger for
convenient operation
Function Requirestest
leads Range Resolution
Accuracy[1] FieldSenseac
voltage True-rms No 600 V
1 V
Availability: In Stock
£177.00
Available
-
Sealey AK4008 Circuit
Tester 6-24v Features:
Suitable for 6-24V DC
circuits Knurled brass
body with test light
Probe tip is covered with
protective brass screw
cap Tester illuminates
when voltage is present
Comes With: Cable and
alligator earth clip 1
Year Warranty
Availability: In Stock
£5.00
Denmark