About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store
Filters

Filters

[1] [3] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [Y] [Z]
Price: £ - £
Router Accessories > Routing Jigs
Available
Trend TEMP/NUC/57 Number Template Set 57MM Uppercase
Trend TEMP/NUC/57 Number
Template Set 57MM Uppercase
    Trend TEMP/NUC/57 Number
    Template Set 57MM
    Uppercase The Trend
    TEMP/NUC/57 is clear
    plastic number templates
    for writing words for
    signs including house
    numbers. The templates
    are used with a 13mm
    guide bush and 8mm
    diameter cutter and all
    the numbers are nominal
    57mm high. A Unibase may
    be required for certain
    makes and models of
    router. This set
    comprises of two plastic
    templates. Features: Two
    clear plastic letter
    templates, numbers 1-10
    Uppercase 57mm high
    Unibase may be required
Availability: In Stock
£15.00
Archived Product
Trend LOCK/JIG/B Adjustable Trade Lock Jig
Trend LOCK/JIG/B Adjustable
Trade Lock Jig
    Trend LOCK/JIG/B
    Adjustable Trade Lock Jig
    This Trend Adjustable
    Trade Lock Jig has
    adjustable sliding
    inserts to allow
    faceplate and mortise
    recesses for popular size
    door locks to be routed
    with a plunge router. It
    is quick and easy to set
    up using engraved lines
    for lock size and door
    sizes. It provides fast,
    clean & accurate results
    on doors even in
    hardwood. Deeper mortises
    can be achieved with a
    suitable size of auger
    bit. This lock jig is
    made from a Plastic
    laminate body with
    aluminium clamping bar,
    with clamping range 30mm
    to 80mm. Features: Fully
    adjustable for lock face
    plate length up to 250mm.
    Quick and easy to set up
    using engraved lines for
    lock size and door sizes
    Fast, clean & accurate
    results on doors even in
    hardwood Engraved for
    16mm and 19mm lock width
    and 22.5mm and 25.4mm
    face plate widths
    Measuring required for
    other lock widths
    Engraved on underside to
    allow set up for 35mm,
    40mm, 44mm and 54mm door
    widths Deeper mortises
    can be achieved with a
    suitable size of auger
    bit Plastic laminate body
    with aluminium clamping
    bar, with clamping range
    30mm to 80mm   Comes
    With: 2 x setting block
    Door thickness min.: 30
    mm Door thickness max.:
    80 mm Faceplate length
    min.: 30 mm Faceplate
    length max.: 250mm Face
    Plate Dimension Engraved
    Widths: 22.5 mm and25.4
    mm (1 inch) Mortise
    Dimension Engraved
    Widths: 16 mm (5/8 inch)
    and 19 mm (3/4 inch)
Availability: In Stock
£99.00
Available
Trend SM/PRO Scribemaster Pro Scribing Jig
Trend SM/PRO Scribemaster Pro
Scribing Jig
    Trend SM/PRO Scribe
    Master Pro Scribing Jig
    The Trend Scribe Master
    Pro is perfect for fast,
    efficient and accurate
    scribes every time.
    Designed and made in the
    UK with a patented
    design, it will quickly
    mount on to your mitre
    saw stand with the
    optional mount kit or can
    be used stand alone. How
    it works: Steel combs are
    pushed in to the sample
    mould Comb assembly is
    then turned over to give
    a scribe Copy pin then
    follows the scribecontour
    allowing the router
    cuttern to cut the scribe
    Features: Can cut any
    skirting or dado profile
    Cuts left and right hand
    scribes Scribes warped
    boards For use with 1/4"
    or 1/2" routers Up to 10
    times faster than manual
    scribes Quick and easy to
    set up and use Pre
    assembled and ready for
    use Precisie cuts every
    time Made from High
    Pressure Laminate for
    stability Comes with: 4mm
    x 1/4" shank HSSE single
    flute spiral for softwood
    and MDF Comb alignment
    tool Workpiece clamp knob
Availability: In Stock
£249.00
Available
Trend H/JIG/C 2 Part Skeleton Hinge Jig
Trend H/JIG/C 2 Part Skeleton
Hinge Jig
    Trend H/JIG/C 2 Part
    Skeleton Hinge Jig Two
    part adjustable block
    portable template set
    designed for recessing
    hinges in wooden doors &
    frames with a router.
    Features: It is easy to
    use with minimal
    setting-up time,
    completing the job both
    accurately & quickly Used
    on-site & in joinery
    shops to increase
    productivity with
    excellent results Fully
    adjustable apertures for
    fire door requirements
    and renovation work Idea
    for fitting a new door in
    an old frame No need for
    marking out in the
    conventional way Quick &
    simple to set-up as the
    hinge is used as the
    pattern Clean & accurate
    recesses are achieved
    every time. Suitable for
    timber based doors &
    square butt hinges Use
    with a light duty plunge
    router with 1/4 inch
    collet Long reach router
    cutter required, 12mm
    diameter with 70mm
    overall length Adjustable
    edge guides with preset
    for hinge of 20mm, 25mm
    and 30mm Unibase may be
    needed Patent No.
    GB2285410, GB1106608.1
    T4EK router requires a
    ref. UNIBASE or special
    guide bush ref. GB/T4/160
    Comes with: 3 x Hinge
    sliding aperture block
    assemblies 4 x Bradawls
    (short blade) 1 x 16mm
    guide bush 1 x Carry case
Availability: In Stock
£189.00
Archived Product
Trend SM/TSP Scribemaster Pro Tenon Slide Plate
Trend SM/TSP Scribemaster Pro
Tenon Slide Plate
    Trend SM/TSP Scribemaster
    Pro Tenon Slide Plate
    Tenon slide plate for use
    with the Scribemaster
    Pro. Used to cut through
    housing, half lap and
    tongue and groove lining
    joints. Features: Plate
    is locked in position on
    jig and allows through
    housing, half lap
    (halving) and tongue &
    groove lining joints etc.
    to be routed. Use with a
    30mm guide bush and
    suitable straight cutter.
    Maximum cutter diameter
    22mm. Comes with: 1 x
    Tenon plate 1 x Clamp bar
    1 x Hex key 4mm / 5mm  
    Max. working length: 190
    mm Max. tenon length adj:
    50 mm Max. cutter dia: 22
    mm
Availability: In Stock
£39.00
Available
Trend D/LIFT/B Door & Board Lifter Swivel Type
Trend D/LIFT/B Door & Board
Lifter Swivel Type
    Trend D/LIFT/B Door &
    Board Lifter Swivel Type
    Allows up and down and
    side to side movement for
    easy positioning and
    fixing of door, panels
    and plasterboard. Stable
    foot operation due to
    great design. Pad has
    non-slip surface to aid
    grip. Features: Foot
    operated lifter to
    support door while
    fitting into door frame.
    Foot operated freeing up
    the users hands. 360
    degree rotation. Lifts
    door 60mm (2-3/8 inch)
    high and maximum weight
    75kg (165 Ibs). Made from
    metal with non marring
    foot pad. Raises up
    parallel. Extra care
    needed with veneered
    doors. No need to use a
    chisel and bolster. Ideal
    for carpenters,
    plasterers and drywall
    fixer.  
Availability: In Stock
£16.00
Available
Trend AR/JIG Aperture Radius Jig
Trend AR/JIG Aperture Radius
Jig
    Trend AR/JIG Apeture
    Radius Jig A jig to rout
    out apertures, recesses
    and radii in work tops to
    fit a range of sinks and
    hobs, and to suit curved
    cabinets. Features: Will
    cut both an internal and
    external radiius with the
    use of either pins or
    engraved sight lines.
    Will cut a 90 degree
    angle, which when
    combined with the
    straight slot will allow
    a hob or sink aperture to
    be routed. Central slot
    allows cuts up to 820mm
    long. Radius curves at
    40mm, 60mm, 80mm,
    100mm, 150mm and 250mm,
    and has external radii of
    50mm, 100mm and 200mm
    Jig has a 45 degree end
    cut, plus 26mm and 35mm
    cabinet door hinge recess
    facility. Engraved lines
    to position jig to marked
    position on the worktop.
    Each of the six radius
    curves is paired with a
    set of peg holes that
    will set the jig to work
    top edge. Pins made from
    ABS plastic for strength.
    Jig requires: (Not
    Supplied) A portable
    plunge router with 12.7mm
    (1/2 inch) shank capacity
    and minimum 1300 watts. A
    template guide bush with
    30mm outside diameter. A
    TCT router cutter with
    12.7mm (1/2 inch)
    diameter and 50mm (2
    inch) cut length. Two
    clamps  
Availability: In Stock
£99.00
Archived Product
Trend HR/JIG Hot Rod Jig
Trend HR/JIG Hot Rod Jig
    Trend HR/JIG Hot Rod Jig
    Trend HR/JIG Hot Rod Jig
    for routing grooves in
    solid work tops to accept
    12mm diameter hot rods.
    Hot rods prevent heat
    damage to work surface
    Features: Accepts hot
    rods of size 100mm,
    200mm, 300mm and 400mm
    Made from 12mm hard
    wearing CNC machined
    solid phenolic plastic.
    Grooves at 50mm pitch.
    Series of peg holes at
    50mm increments too allow
    recess at 90 degree to
    work surface or at 45
    degree. Use Ref.
    C054AX1/2TC, R6.35mm
    cove (12.7mm diameter)
    for standard 12.7mm rods,
    or Ref. C053CX1/2TC,
    R6mm cove (12mm diameter)
    for 12mm rods. Use other
    cove cutters for other
    rod diameters. It is
    desirable to recess the
    rods into the worktop by
    approximately one third
    to one half of the rod
    diameter. Hot rods not
    included.   Groove
    pitch: 50.0 mm Groove
    length: 100, 200, 300
    and 400 mm Length: 700 mm
    Width: 390 mm Thickness:
    12 mm Weight: 3.5kg  
Availability: In Stock
£40.00
Contact Us
Let us dent the universe not by a single action but by billions of innovations that define us as humans
  • productWIKI, St Austell Close, Stafford, Staffordshire, ST17 0EE, United Kingdom
  • web@productwiki.co.uk
  • +44 (0) 20 8191 9063
  • Mon-Sat 8:30am - 5:30pm
Information
My Account
Newsletter
Subscribe to our newsletter for latest offers
© Copyright productWIKI 2022 All rights reserved.
Menu