United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Power Tool Accessories > Router Bits & Cutters
Archived Product
-
Trend SNAP/PC/8T Trend
Snappy Tube Plug Cutter
8mm (Shank Diameter 1/4
Hex") Features: Made
from Tool Steel they
allow for longer plugs to
be drilled Plugs are
parallel sided
Recommended for use with
a pillar drill Warranty:
12 months Shank
Diameter:1/4 inch hex
Plug size:8 mm Nett
Weight: 0.016kg Packaged
Size: 145x36x23mm
Availability: In Stock
£14.33
Archived Product
-
Trend C198X1/2TC Bearing
Guided Round Over Ovolo
16mm Radius (Shank
Diameter 1/2")
Features: Self-guiding
cutters for rounding over
edges do not require a
side fence They are
supplied with two
bearings Use the larger
bearing for a round-over
If the cutter is lowered,
a top quirk can be
produced Bullnose
mouldings can also be
produced by taking a
second pass from the
opposite side of the
workpiece Warranty: 12
months D:44.5 mm C:22 mm
B:9.5 mm B2:12.7 mm R:5/8
inch R:16 mm Shank
Diameter:1/2 inch Nett
Weight: 0.11kg Packaged
Size: 107x67x67mm
Availability: In Stock
£25.00
Archived Product
-
Trend CE/88 Collet
Extension 8mm Shank 8mm
Collet (Shank Diameter 8
Mm") Features: The
new size has an 8mm shank
and 1/4 inch collet, and
should be used with
medium duty routers of
minimum 850 watts, use
at maximum speed 18000
RPM and maximum cutter
diameter 35mm Increases
spindle length by 41mm
Maximum tool cut length
25mm Requires 12mm & 17mm
A/F spanners Warranty: 12
months Shank size:8mm
Collet size d:8mm Overall
length:64 mm Maximum
speed:18000 rpm Maximum
tool dia:35mm Maximum
tool cut:25mm Nett
Weight: 0.052kg Packaged
Size: 145x40x25mm
Availability: In Stock
£42.00
Archived Product
-
Trend FHA/009 Fine Height
Adjuster T4 & Fbf-850
Features: This fine
height adjuster simply
fits onto the router and
allows fine adjustment of
the cutter height They
are especially useful for
accurate work such as
when the router is held
inverted in a router
table Suitable for the
following TREND T4 FERM
FBF-850E BLACK & DECKER
KW779, 780 & 800E
POWERMASTER 710W HILKA
918007 CLARK CRI
Warranty: 12 months
Thread size:M5 Overall
length:230 mm Nett
Weight: 0.076kg Packaged
Size: 300x77x35mm
Availability: In Stock
£13.52
Archived Product
-
Trend T421/35X1/4TC TCT
Hinge Sinking Bit 35mm
Diameter Features: These
machine bits are
typically used by kitchen
furniture manufacturers
For recessing circular
hinges This hinge sinker
is bested suited for
thinner laminate covered
boards Use with pillar
drills only Net Weight:
0.068kg
Availability: In Stock
£22.00
Available
-
Trend SNAP/DBG/SET Drill
Bit Guide Set with Quick
Chuck - 5/64in, 7/64in &
9/64in Features: These
spring loaded drill bit
guides are self centring
and are used for accurate
drilling of holes for
fittings such as hinges
to ensure exact
alignment. They can be
easily dismantled for
cleaning and are supplied
with a HSS Drill Bit.
This set comprises a
quick chuck and three
sizes of drill bit guides
for accurate fitting of
hinges. Comes with: 1 x
Quick chuck 1 x Drill bit
guide 5/64in 1 x Drill
bit guide 7/64in 1 x
Drill bit guide 9/64in
Availability: In Stock
£39.00
Available
-
Trend SET/SS11X1/2TC 6
Piece Router Starter
Cutter Set 1/2 Inch Shank
TCT This six piece cutter
set contains a range of
Tungsten Carbide Tipped
cutters for decorative
woodworking. Features:
Suitable for various
materials such as
softwood, hardwood,
chipboard, plywood and
MDF Excellent value for
money Supplied in a
robust secure plastic
carry case with a handle
grip
Availability: In Stock
£15.00
Available
-
Trend SET/SS24x1/4TC 24
Piece Router Starter
Cutter Set 1/4 Inch Shank
TCT This twenty four
piece cutter set contains
a range of popular
Tungsten Carbide Tipped
cutters for a variety of
applications. Features:
1/4-inch shank diameter
For softwood, hardwood,
chipboard, plywood and
MDF A range of widely
used cutters for
decorative woodworking
Supplied in plastic carry
case Excellent value for
money Â
Availability: In Stock
£59.05
Available
-
Trend SET/SS11X1/4TC 6
Piece Router Starter
Cutter Set 1/4 Inch Shank
TCT This six piece cutter
set contains a range of
Tungsten Carbide Tipped
cutters for decorative
woodworking. Features:
Appropriate for grooving,
profiling and moulding
For softwood, hardwood,
chipboard, plywood and
MDF Excellent value for
money Equipped in a
robust plastic carry case
Contains: 1 x Straight
6.3mm dia x 16mm cut 1 x
Straight 12.7mm dia x
25mm cut 1 x V-groove 45
deg x 12.7mm dia 1 x
Guided round over R6.35mm
1 x Guided round over
R9.5mm 1 x Guided ogee
R4mm
Availability: In Stock
£19.00
Archived Product
-
Trend B260 "bearing
26mm Diameter
1/4""
Bore" Features:
Bearings are shielded to
prevent penetration of
dust and grease packed
for life They should not
be cleaned with solvent
or lubricated as this
will dissolve the grease
and cause premature
bearing failure Scrape
off any resin build-up
Always check the
tightness of the fixing
screw before using cutter
Warranty: 12 months OD:26
mm ID:1/4 inch ID:6.35 mm
Thickness:5.9 mm Nett
Weight: 0.01kg Packaged
Size: 144x76x7mm
Availability: In Stock
£7.15
Available
-
Trend SET/SS8X1/4TC 12
Piece Starter Cutter Set
(Shank Diameter 1/4")
This twelve piece cutter
set contains a range of
the most widely used
cutters for decorative
woodworking. Excellent
value for money. Supplied
in plastic carry case.
Warranty: 12 months Comes
With: "2 x Straight dia
1/4"" & 1/2"" 1 x
Dovetail 104 deg x 1/2""
dia 2 x Guided Round Over
radius 6.35mm & 9.5mm 1 x
Guided Chamfer 45 degree
1 x Guided Rebater 9.5mm
rebate 1 x Guided Trimmer
dia 12.7mm 1 x Guided
Cove radius 6.3mm 1 x 'V'
Groove 45 degree 1 x Core
Box radius 6.35 1 x
Guided Ogee radius 4mm"
Â
Availability: In Stock
£28.00
Archived Product
-
Trend SET/SS15X1/2TC 15
Piece Starter Router Bit
Set 1/2 in Features: 15
piece set Containing a
range of TCT chrome
molydenum steel cutters
Including bearing guided
tools for decorative
woodworking Supplied in a
unique presentation kit
box Net Weight: 1.806kg
Availability: In Stock
£99.95
Available
-
Trend SET/SS35X1/2TC
Router Cutter Starter Set
35 Pieces This thirty
five piece cutter set
contains a range of
popular Tungsten Carbide
Tipped cutters for a
variety of applications.
Excellent value for money
starter set with a good
selection of cutters in a
well made aluminium case.
Features: Perfect for
hobbyist workshop
woodworkers, carpenters
1/2 inch shank diameter
For softwood, hardwood,
chipboard, plywood and
MDF Excellent value for
money for these quality
sharp bits which are very
well engineered Comes
with: Aluminium carry
case Â
Availability: In Stock
£72.00
Archived Product
-
Trend CCC/KIT Cutter &
Collet Care Kit Features:
This kit contains the
essential accessories to
maximise the life of your
cutters, collets and
router The kit comprises
of: - 1 Mini diamond
stone and water bottle 4
brass brushes for
cleaning collets 1
P.T.F.E. dry lubricant
spray 1 Rust buster spray
56 page booklet Net
Weight: 0.214kg
Availability: In Stock
£22.27
Archived Product
-
Trend SNAP/PC8/SET Trend
Snappy Plug Cutter No 8
Screw Set (Shank Diameter
1/4 Hex") Features:
Plug cutter set for No.8
screw size The set
comprises Quick Chuck,
Drill/Countersink, Pozi
Screwdriver bit and
standard Plug cutter
Warranty: 12 months Comes
With: 1 x Quick chuck 1 x
Drill/Countersink 1 x
Pozi Screwdriver Bit 1 x
Plug Cutter Shank
Diameter:1/4 inch hex
Nett Weight: 0.133kg
Packaged Size:
185x145x28mm
Availability: In Stock
£25.00
Archived Product
-
Trend FHA/001 Fine Height
Adjuster For T3, T5,
Mof 96 + Others Features:
This fine height adjuster
simply fits onto the
router and allows fine
adjustment of the cutter
height They are
especially useful for
accurate work such as
when the router is held
inverted in a router
table Suitable for the
following TREND T3, T5,
T5MK2 AXMINSTER AW635R
CHALLENGE 1020W CHAMPION
CPR850 DIY ER005 DEWALT
DW613, 614, 615 DRAPER
R850V EINHELL EOF 850SP,
BOF 1050E ELU MOF 96(E)
FERM FBF-6E, 8E 1050E
NUTOOL NPT850, 102,
HP6, MNPC900 POWERBASE
1020W PERFORMANCE POWER
1020W PERLES OF808(E),
OF2-808(E) POWER DEVIL
PDW5026, 5027 POWER BASE
1020W SILVERLINE SL762
VIRUTEX FR78, 78C WICKES
900W SEALEY SR1000 OSAKI
1020W Warranty: 12 months
Thread size:M5 Nett
Weight: 0.073kg Packaged
Size: 255x77x29mm
Availability: In Stock
£12.00
Archived Product
-
Trend H75 Toggle Clamp 4
X 1 1/2 Features: Ideal
for securing workpiece
either onto jigs or to
the surface of the
machine Warranty: 12
months Clamping
force:75kg E:30 mm A:105
mm B:36 mm Fixing hole
spacing (length): 14mm
centre to centre Fixing
hole spacing (width):
17mm centre to centre
Fixing holw width:5mm
Nett Weight: 0.083kg
Packaged Size:
185x133x25mm
Availability: In Stock
£15.00
Archived Product
-
Trend SP-C Spare Part
Pack Features: Spare part
packs make ordering
spares easier Packs
include, hex key (if
required), screw,
washer and shield (if
required) Warranty: 12
months Comes With: 1 x
Hex key 1 x Screw 1 x
Washer 2 x Shield Hex
key:3/32 inch Screw:NC5 X
3/8 inch Washer ID:3.5 mm
Shield OD:1/2 inch
ID:3/16 inch Washer
ID:5.0mm Nett Weight:
0.005kg Packaged Size:
118x57x6mm
Availability: In Stock
£2.05
Archived Product
-
Trend C123X1/4TC Template
Profile 19.1mm Diameter
(Shank Diameter
1/4") Features:
Shank mounted bearing
profilers are ideal for
template guidance Use for
rebating and trimming
edges only Extra care
must be taken to avoid
cutter breakage Warranty:
12 months D:3/4 inch
D:19.1 mm C:1 inch C:25.4
mm Shank Diameter:1/4
inch Nett Weight: 0.054kg
Packaged Size:
144x76x19mm
Availability: In Stock
£18.55
Archived Product
-
Trend Router Cutters
RT/11X1/2TC Straight
Blade Rota Tip 12.7mm x
100mm Features: Rota-Tip
Cutters are highly
economical for use in
production applications
The blades, which are
manufactured from a
harder grade of Tungsten
Carbide than conventional
tooling are rotated to
expose a new cutting edge
ensuring the diameter of
the tool remains constant
Blades are replaced when
all edges become chipped
or dull The Blades are
fixed directly onto the
tool bodies using torx
screws and may be
replaced without removing
the cutter from the
router Comes with:
Blade(s) fitted Torx key
T.C.T. D1 1/2inch D1 12.7
mm Cut length: 29.5 mm
Overall length: 100 mm
Shank Diameter: 1/2inch
Net Weight: 0.109kg
Availability: In Stock
£55.00
Archived Product
-
Trend RT/13X1/2TC
Rota-tip Straight 12.7 Mm
Diameter (Shank Diameter
1/2") Features:
Solid Carbide replaceable
blades Tool body remains
in place when changing
blades, thus reducing
down-time Straight
cutters have blades with
two or four cutting
edges, allowing them to
be rotated and locked in
identical positions 1/2
inch shank tools are
ideal for use in
production applications
Clear economical
advantage over
conventional brazed tip
tooling The single blade
can be rotated 180
degrees to give double
the life of a
conventional tool Ideally
suited for use with Trend
Combi worktop jigs
Suitable for plunge
cutting Use on chipboard
only Warranty: 12 months
D:1/2 inch D:12.7 mm
C:49.5 mm OL:100 mm Shank
Diameter:1/2 inch Nett
Weight: 0.095kg Packaged
Size: 144x76x13mm
Availability: In Stock
£59.00
Available
-
DeWalt DE6277 Replacement
12 mm Router Collet This
DeWalt replacement 12 mm
Router collet is suitable
for DeWalt DW624,
DW625E/EK and DW629
Routers. Features: A 12
mm replacement Collet for
a Router Suitable for
DeWalt DW624, DW625E/EK
and DW629 machines
Availability: In Stock
£20.00
Archived Product
-
Trend 345X1/2TC
Intumescent Cutter Set
(Shank Diameter
1/2") Features:
Cutter Set Ref. 346 is
used for the grooving of
door edges to receive
10mm intumescent strip.
The arbor can be lowered
or raised to give a wider
groove for 20mm strip.
Alternatively Ref. 345
can be used for 20mm
strip. Choose alternative
bearings shown above to
suit other thicknesses of
intumescent strip
Warranty: 12 months D:40
mm C:20 mm B:32 mm E:4 mm
L:41 mm Shank
Diameter:1/2 inch Fire
check:60 minutes Nett
Weight: 0.244kg Packaged
Size: 107x67x67mm
Availability: In Stock
£65.90
Archived Product
-
Trend C153MX1/2TC Two
Flute Cutter 12.7mm
Diameter (Shank Diameter
1/2") Features: Two
fluted Solid Carbide
insert straight cutters
Suitable for a wide range
of applications such as
engraving, grooving,
rebating and shallow
mortising Use on
softwoods, hardwoods,
MDF, plywood and
chipboard Has a bottom
cut feature When deep
cuts are required, more
than one pass should be
taken Centre tip for
drilling Warranty: 12
months D:12.7 mm C:50 mm
Overall length:83 mm
Shank Diameter:1/2 Nett
Weight: 0.061kg Packaged
Size: 144x57x13mm
Availability: In Stock
£12.39
Archived Product
-
Trend C213X1/2TC
Weatherseal Groover 3 X 7
X 36mm Diameter (Shank
Diameter 1/2")
Features: Two fluted
tungsten carbide
weatherseal groover for
use on natural timbers
and manmade boards. The
cutter is non stick
coated to reduce resin
build up Neatly cuts
grooves on doors or
frames to accept a
weatherseal Warranty: 12
months D:36 mm C:3 mm
OL:80 mm B:22 mm Shank
Diameter:1/2 inch Nett
Weight: 0.102kg Packaged
Size: 107x67x67mm
Availability: In Stock
£28.87
Available
-
Trend C076X1/4TC Rounding
Over 6.3mm Radius 12.7mm
Cut The Trend C076X1/4TC
Self-Guiding Cutters are
for rounding over edges
and do not require a side
fence. It is supplied
with two bearings. Use
the larger bearing for a
round-over. If the cutter
is lowered, a top quirk
can be produced. Bullnose
mouldings can also be
produced by taking a
second pass from the
opposite side of the
workpiece. Features:
Microgranular TC tips
ensure perfect sharpness
Highly groundtip face
maintains its edge PTFE
non-stick coated body
Extra long shank Suitable
for all makes of router
Availability: In Stock
£25.00
Archived Product
-
Trend C074BX1/4TC
Rounding Over 3.0mm
Radius X 9.5mm Cut (Shank
Diameter 1/4")
Features: Self-guiding
cutters for rounding over
edges do not require a
side fence They are
supplied with two
bearings Use the larger
bearing for a round-over
If the cutter is lowered,
a top quirk can be
produced Bullnose
mouldings can also be
produced by taking a
second pass from the
opposite side of the
workpiece Warranty: 12
months D:18.7 mm C:3/8
inch C:9.5 mm B:9.5 mm
B2:12.7 mm R:3.0 mm Shank
Diameter:1/4 inch Nett
Weight: 0.03kg Packaged
Size: 144x76x19mm
Availability: In Stock
£19.44
Archived Product
-
Trend C076X1/2TC Rounding
Over 6.3mm Radius X
12.7mm Cut (Shank
Diameter 1/2")
Features: Self-guiding
cutters for rounding over
edges do not require a
side fence They are
supplied with two
bearings Use the larger
bearing for a round-over
If the cutter is lowered,
a top quirk can be
produced Bullnose
mouldings can also be
produced by taking a
second pass from the
opposite side of the
workpiece Warranty: 12
months D:1 inch D:25.4 mm
C:1/2 inch C:12.7 mm
B:9.5 mm B2:12.7 mm R:1/4
inch R:6.3 mm Shank
Diameter:1/2 inch Nett
Weight: 0.065kg Packaged
Size: 144x76x16mm
Availability: In Stock
£22.49
Archived Product
-
Trend C075AX1/4TC
Rounding Over 6.0mm
Radius X 12mm Cut (Shank
Diameter 1/4")
Features: Self-guiding
cutters for rounding over
edges do not require a
side fence They are
supplied with two
bearings Use the larger
bearing for a round-over
If the cutter is lowered,
a top quirk can be
produced Bullnose
mouldings can also be
produced by taking a
second pass from the
opposite side of the
workpiece Warranty: 12
months D:14.7 mm C:12 mm
B:9.5 mm B2:12.7 mm R:6.0
mm Shank Diameter:1/4
inch Nett Weight: 0.038kg
Packaged Size:
144x76x19mm
Availability: In Stock
£20.05
Available
-
Trend C078X1/4TC Rounding
Over 9.5mm Radius 15.9mm
Cut The Trend C078X1/4TC
Self-Guiding Cutters are
for rounding over edges
and do not require a side
fence. It is supplied
with two bearings. Use
the larger bearing for a
round-over. If the cutter
is lowered, a top quirk
can be produced. Bullnose
mouldings can also be
produced by taking a
second pass from the
opposite side of the
workpiece. Features:
Microgranular TC tips
ensure perfect sharpness
Highly groundtip face
maintains its edge PTFE
non-stick coated body
Extra long shank Suitable
for all makes of router
Availability: In Stock
£29.00
Archived Product
-
Trend C117BX1/2TC Guided
Trimmer 19.1mm Diameter
(Shank Diameter
1/2") Features: Used
for trimming plastic or
plywood overlays Also for
copy profiling with a
template Warranty: 12
months D1:3/4 inch
D1:19.1 mm C:50 mm
Overall length:4 1/64
inch Overall length:102
mm B:15.9 mm A:90 degrees
Shank Diameter:1/2 Nett
Weight: 0.123kg Packaged
Size: 144x76x16mm
Availability: In Stock
£30.52
Archived Product
-
Trend C079AX1/2TC
Rounding Over 19mm Radius
X 25mm Cut (Shank
Diameter 1/2")
Features: Self-guiding
cutters for rounding over
edges do not require a
side fence They are
supplied with two
bearings Use the larger
bearing for a round-over
If the cutter is lowered,
a top quirk can be
produced Bullnose
mouldings can also be
produced by taking a
second pass from the
opposite side of the
workpiece Warranty: 12
months D1:51 mm C:1
inches C:25 mm Overall
length:63 mm B:9.5 mm
R1:3/4 inches R1:19.1 mm
Shank Diameter:1/2 Nett
Weight: 0.124kg Packaged
Size: 144x76x38mm
Availability: In Stock
£34.86
Available
-
Trend C121X1/4TC Guided
Template Profiler 12.7mm
Diameter The Trend
C121X1/4TC Guided
Template Profiler has a
shank mounted bearing,
ideal for template
guidance. Use for
rebating and trimming
edges only. Extra care
must be taken to avoid
cutter breakage.
Features: Microgranular
TC tips ensure perfect
sharpness Highly
groundtip face maintains
its edge PTFE non-stick
coated body Extra long
shank Suitable for all
makes of router Â
Availability: In Stock
£15.00
Archived Product
-
Trend C135X1/4TC Pierce
Trim 6.3mm Diameter X
18mm Cut (Shank Diameter
1/4") Features: Cuts
out apertures in laminate
worktops The nose of the
cutter acts as a guide
follower Warranty: 12
months D:1/4 inch D:6.3
mm C:45/64 inch C:18 mm
Shank Diameter:1/4 inch
Nett Weight: 0.017kg
Packaged Size: 144x76x8mm
Availability: In Stock
£12.83
Archived Product
-
Trend C117X1/4TC Guided
Trimmer 15.9mm Diameter
(Shank Diameter
1/4") Features: Used
for trimming plastic or
plywood overlays Also for
copy profiling with a
template Warranty: 12
months D:5/8 inch D:15.9
mm C:5/8 inch C:15.9 mm
Overall length:2 41/64
inch Overall length:67 mm
B:15.9 mm A:90 degrees
Shank Diameter:1/4 inch
Nett Weight: 0.036kg
Packaged Size:
144x76x16mm
Availability: In Stock
£14.75
Available
-
Trend C121BX1/4TC Guided
Template Profiler 12.7mm
Diameter The Trend
C121BX1/4TC Guided
Template Profiler has a
shank mounted bearing,
ideal for template
guidance. Use for
rebating and trimming
edges only. Extra care
must be taken to avoid
cutter breakage.
Features: Microgranular
TC tips ensure perfect
sharpness Highly
groundtip face maintains
its edge PTFE non-stick
coated body Extra long
shank Suitable for all
makes of router Â
Availability: In Stock
£15.00
Available
-
Trend C152X1/2TC Biscuit
Jointer Set 12.7mm
Diameter 1/2 Inch Shank
The Trend C152X1/2TC
Biscuit Jointer is a two
wing self-guiding
Tungsten Carbide Tipped
slotting cutter ideal for
biscuit jointing. The set
is supplied with three
ball bearing guides to
suit the three sizes of
biscuits available. A
slightly longer cut than
the length of the biscuit
is required for ease of
alignment during
assembly. Features:
Microgranular TC tips
ensure perfect sharpness
Highly groundtip face
maintains its edge PTFE
non-stick coated body
Extra long shank Suitable
for all makes of router
Â
Availability: In Stock
£32.00
Available
-
Trend C153DX1/2TC Two
Flute Cutter 12.7mm
Diameter The Trend
C153X1/2TC Two Flute
Cutter is suitable for a
wide range of
applications such as
engraving, grooving,
rebating and shallow
mortising. Ideal for use
with Trend Worktop Jigs.
Cuts wood, particle
board, plywood, MDF and
hardboard. With TCT
Centre Tip this cutter is
especially suited for
drilling. Features:
Microgranular TC tips
ensure perfect sharpness
Highly groundtip face
maintains its edge PTFE
non-stick coated body
Extra long shank Suitable
for all makes of router
Â
Availability: In Stock
£21.00
Archived Product
-
Trend C153SX1/2TC Two
Flute 12.7mm Diameter X
50mm Cut Scale (Shank
Diameter 1/2")
Features: Suitable for a
wide range of
applications such as
engraving, grooving,
rebating and shallow
mortising Etched with
metric scale on body to
aid depth setting. Use on
softwoods, hardwoods,
MDF, plywood and
chipboard All cutters
have a bottom cut feature
Ref C153S is ideal for
use with worktop jigs
Warranty: 12 months
D1:1/2 inches D1:12.7 mm
C:2 inches C:50 mm
Overall length:93 mm
Shank Diameter:1/2 Nett
Weight: 0.069kg Packaged
Size: 144x57x13mm
Availability: In Stock
£13.30
Archived Product
-
Trend C193X1/2TC Bearing
Guided Rebater 31.8mm
Diameter X 15.9mm (Shank
Diameter 1/2")
Features: These cutters
are self-guiding and can
be used to produce
rebates, lap joints,
tongues and rebated
corners When using
bearing Ref. B95A make
two passes when a full
depth of cut is required
Warranty: 12 months
D:31.8 mm C:15.9 mm B:9.5
mm B2:12.7 mm E:9.5 mm
E2:11.1 mm Shank
Diameter:1/2 inch Nett
Weight: 0.108kg Packaged
Size: 144x76x32mm
Availability: In Stock
£23.81
Archived Product
-
Trend C167X1/4TC Guided
Trimmer 6.35mm Diameter X
12.7mm (Shank Diameter
1/4") Features: Used
for trimming plastic or
plywood overlays Also for
copy profiling with a
template Warranty: 12
months D:1/4 inch D:6.35
mm C:1/2 inch C:12.7 mm
Overall length:2 13/32
inch Overall length:61 mm
B:6.35 mm A:90 degrees
Shank Diameter:1/4 inch
Nett Weight: 0.013kg
Packaged Size: 118x57x6mm
Availability: In Stock
£10.96
Available
-
Trend C153X1/2TC Two
Flute Cutter 12.7mm
Diameter The Trend
C153X1/2TC Two Flute
Cutter is suitable for a
wide range of
applications such as
engraving, grooving,
rebating and shallow
mortising. Ideal for use
with Trend Worktop Jigs.
Cuts wood, particle
board, plywood, MDF and
hardboard. Features:
Microgranular TC tips
ensure perfect sharpness
Highly groundtip face
maintains its edge PTFE
non-stick coated body
Extra long shank Suitable
for all makes of router
Â
Availability: In Stock
£13.00
Available
-
Trend C164X1/2TC Two
Flute Cutter 12.7mm
Diameter The Trend
C164X1/2TC Two Flute
Cutter is suitable for a
wide range of
applications such as
engraving, grooving,
rebating and shallow
mortising. Ideal for use
with Trend Worktop Jigs.
Cuts wood, particle
board, plywood, MDF and
hardboard. Features:
Microgranular TC tips
ensure perfect sharpness
Highly groundtip face
maintains its edge PTFE
non-stick coated body
Extra long shank Suitable
for all makes of router
Â
Availability: In Stock
£19.00
Available
-
Trend C168X1/4TC Guided
Trimmer 6.35mm Diameter
25.4mm Cut The Trend
C168X1/4TC Guided Trimmer
is used for trimming
plastic or plywood
overlays. Fitted with a
1/4 inch shank. Features:
Microgranular TC tips
ensure perfect sharpness
Highly groundtip face
maintains its edge PTFE
non-stick coated body
Extra long shank Suitable
for all makes of router
Availability: In Stock
£13.00
Archived Product
-
Trend C193X1/4TC Bearing
Guided Rebater 31.8mm
Diameter X 15.9mm (Shank
Diameter 1/4")
Features: These cutters
are self-guiding and can
be used to produce
rebates, lap joints,
tongues and rebated
corners When using
bearing Ref. B95A make
two passes when a full
depth of cut is required
Warranty: 12 months
D:31.8 mm C:15.9 mm B:9.5
mm B:12.7 mm E:9.5 mm
E2:11.1 mm Shank
Diameter:1/4 inch Nett
Weight: 0.077kg Packaged
Size: 144x76x26mm
Availability: In Stock
£23.81
Archived Product
-
Trend 4/60X1/2TC Two
Flute Cutter 22 Mm
Diameter (Shank Diameter
1/2") Features: TCT
for abrasive materials
such as chipboard, MDF,
plywood, hardwoods and
hard plastics Two flutes
give a clean finish to
cut edges TCT plunge
centre tip Warranty: 12
months D:55/64 inch D:22
mm C:19 mm OL:57 mm Shank
Diameter:1/2 inch Nett
Weight: 0.066kg Packaged
Size: 144x76x22mm
Availability: In Stock
£22.12
Archived Product
-
Trend 4/4X1/4TC Two Flute
Cutter 18.2 Mm Diameter
(Shank Diameter
1/4") Features: TCT
for abrasive materials
such as chipboard, MDF,
plywood, hardwoods and
hard plastics Two flutes
give a clean finish to
cut edges TCT plunge
centre tip Warranty: 12
months D:23/32 inch
D:18.2 mm C:21 mm OL:53
mm Shank Diameter:1/4
inch Nett Weight: 0.03kg
Packaged Size:
118x57x18mm
Availability: In Stock
£22.12
Archived Product
-
Trend 4/7X1/2TC Two Flute
Cutter 22.2 Mm Diameter
(Shank Diameter
1/2") Features: TCT
for abrasive materials
such as chipboard, MDF,
plywood, hardwoods and
hard plastics Two flutes
give a clean finish to
cut edges TCT plunge
centre tip Warranty: 12
months D:7/8 inch D:22.2
mm C:31 mm OL:73 mm Shank
Diameter:1/2 inch Nett
Weight: 0.1kg Packaged
Size: 144x57x22mm
Availability: In Stock
£31.12
Archived Product
-
Trend 4/5X1/4TC Two Flute
Cutter 19.1 Mm Diameter
(Shank Diameter
1/4") Features: TCT
for abrasive materials
such as chipboard, MDF,
plywood, hardwoods and
hard plastics Two flutes
give a clean finish to
cut edges TCT plunge
centre tip Warranty: 12
months D:3/4 inch D:19.1
mm C:25 mm OL:58 mm Shank
Diameter:1/4 inch Nett
Weight: 0.038kg Packaged
Size: 118x57x19mm
Availability: In Stock
£26.58
Archived Product
-
Trend 46/212X1/2TC Guided
Trimmer 19.1 Mm Diameter
50mm Length (Shank
Diameter 1/2")
Features: Self-guiding
trimmers with bearings
mounted on end of cutter
For trimming plastic or
plywood overlay For copy
profiling, use the
bearing to follow a
template or base edge of
board An approximate 3mm
overlap should be left
before copy profiling.
When using plastic
laminate adhesive to dry
before trimming. This
avoids clogging the guide
bearing Refs. T46/1,
46/2 and 46/20 are
downcut to prevent
breakout on veneer Ref.
46/211 has a sleeved
bearing to allow for
regrinds in case of
resharpening Warranty: 12
months D:3/4 inch D:19.1
mm C:2 inches C:50 mm
OL:116 mm B:19.1 mm Shank
Diameter:1/2 inch Nett
Weight: 0.144kg Packaged
Size: 144x76x19mm
Availability: In Stock
£47.40
Archived Product
-
Trend 46/210X1/2TC Guided
90 Degree Trimmer 12.7 Mm
Diameter 38.1mm Length
(Shank Diameter
1/2") Features:
Self-guiding trimmers
with bearings mounted on
end of cutter For
trimming plastic or
plywood overlay. For copy
profiling, use the
bearing to follow a
template or base edge of
board An approximate 3mm
overlap should be left
before copy profiling
When using plastic
laminate adhesive to dry
before trimming This
avoids clogging the guide
bearing. Refs. T46/1,
46/2 and 46/20 are
downcut to prevent
breakout on veneer Ref.
46/211 has a sleeved
bearing to allow for
regrinds in case of
resharpening Warranty: 12
months D:12.7 mm C:1 1/2
inches C:38.1 mm B:12.7
mm A:90 degrees Shank
Diameter:1/2 inch Nett
Weight: 0.077kg Packaged
Size: 144x76x13mm
Availability: In Stock
£32.00
Archived Product
-
Trend 4/03X1/2TC Two
Flute Cutter 14 Mm
Diameter (Shank Diameter
1/2") Features: TCT
for abrasive materials
such as chipboard, MDF,
plywood, hardwoods and
hard plastics Two flutes
give a clean finish to
cut edges TCT plunge
centre tip Warranty: 12
months D:35/64 inch D:14
mm C:50 mm OL:95 mm Shank
Diameter:1/2 inch Nett
Weight: 0.079kg Packaged
Size: 144x57x14mm
Availability: In Stock
£40.79
Archived Product
-
Trend 36/19X1/4TC 19mm
Rebater (Shank Diameter
1/4") Features:
Recessing cutter for
producing double rebates
For producing recesses
with a lower rebate
Designed to accept
library/bookcase strip.
Ref. 36/19 is
specifically designed for
Tonk Strip Warranty: 12
months D:9.5 mm D2:19 mm
C:13 mm C2: 6 mm Shank
Diameter:1/4 inch Nett
Weight: 0.031kg Packaged
Size: 118x57x10mm
Availability: In Stock
£36.62
Archived Product
-
Trend 46/96X1/4TC
Profiler (Shank Diameter
1/4") Features:
Profiler with shank
mounted bearing guides
For use with router
mounted above or below a
table when following a
template For profiling
and rebating applications
only Not for plunge
cutting/grooving A 3mm
maximum overlap should be
left before trimming
Refs. 46/910 and 46/91
have a shorter cutter
length for use on thin
boards They are ideal for
template making Warranty:
12 months D:1/2 inch
D:12.7 mm C:32 mm B:12.7
mm A:90 degrees Shank
Diameter:1/4 inch Nett
Weight: 0.035kg Packaged
Size: 144x76x13mm
Availability: In Stock
£26.14
Archived Product
-
Trend 3/1X1/2TC Two Flute
5mm Dia (Shank Diameter
1/2") Features: TCT
for abrasive materials
such as chipboard, MDF,
plywood, hardwoods and
hard plastics Two flutes
give a clean finish to
cut edges All cutters
above and including 9.5mm
diameter, have TCT
plunge centre tips
Warranty: 12 months
D:13/64 inch D:5 mm C:16
mm OL:64.5 mm Shank
Diameter:1/2 inch Nett
Weight: 0.043kg Packaged
Size: 118x57x5mm
Availability: In Stock
£17.38
Archived Product
-
Trend 3/04X1/4TC Two
Flute Cutter 2.5 Mm
Diameter (Shank Diameter
1/4") Features: TCT
for abrasive materials
such as chipboard, MDF,
plywood, hardwoods and
hard plastic Two flutes
give a clean finish to
cut edges All cutters
above and including 9.5mm
diameter, have TCT
plunge centre tips
Warranty: 12 months D:2.5
mm C:8 mm OL:48 mm Shank
Diameter:1/4 inch Nett
Weight: 0.009kg Packaged
Size: 118x57x2mm
Availability: In Stock
£15.19
Archived Product
-
Trend 3/12X1/4TC Two
Flute Cutter 6.3 Mm
Diameter (Shank Diameter
1/4") Features: TCT
for abrasive materials
such as chipboard, MDF,
plywood, hardwoods and
hard plastics Two flutes
give a clean finish to
cut edges All cutters
above and including 9.5mm
diameter, have TCT
plunge centre tips
Warranty: 12 months D:1/4
inch D:6.3 mm C:11 mm
OL:44 mm Shank
Diameter:1/4 inch Nett
Weight: 0.009kg Packaged
Size: 118x57x6mm
Availability: In Stock
£14.75
Archived Product
-
Trend 3/10X1/4TC Two
Flute Cutter 3.2 Mm
Diameter (Shank Diameter
1/4") Features: TCT
for abrasive materials
such as chipboard, MDF,
plywood, hardwoods and
hard plastics Two flutes
give a clean finish to
cut edges All cutters
above and including 9.5mm
diameter, have TCT
plunge centre tips
Warranty: 12 months D:1/8
inch D:3.2 mm C:11 mm
OL:51 mm Shank
Diameter:1/4 inch Nett
Weight: 0.009kg Packaged
Size: 118x57x3mm
Availability: In Stock
£15.19
Archived Product
-
Trend 3/22X1/4TC Two
Flute Cutter 6.3 Mm
Diameter (Shank Diameter
1/4") Features: TCT
for abrasive materials
such as chipboard, MDF,
plywood, hardwoods and
hard plastics Two flutes
give a clean finish to
cut edges All cutters
above and including 9.5mm
diameter, have TCT
plunge centre tips
Warranty: 12 months D:1/4
inch D:6.3 mm C:25 mm
OL:56 mm Shank
Diameter:1/4 inch Nett
Weight: 0.012kg Packaged
Size: 118x57x6mm
Availability: In Stock
£17.94
Archived Product
-
Trend 3/50X1/4TC Two
Flute Cutter 9.5 Mm
Diameter (Shank Diameter
1/4") Features: TCT
for abrasive materials
such as chipboard, MDF,
plywood, hardwoods and
hard plastics Two flutes
give a clean finish to
cut edges All cutters
above and including 9.5mm
diameter, have TCT
plunge centre tips
Warranty: 12 months D:3/8
inch D:9.5 mm C:25 mm
OL:58 mm Shank
Diameter:1/4 inch Nett
Weight: 0.017kg Packaged
Size: 118x57x10mm
Availability: In Stock
£19.56
Archived Product
-
Trend 3/23X1/4TC Two
Flute Cutter 6.5 Mm
Diameter (Shank Diameter
1/4") Features: TCT
for abrasive materials
such as chipboard, MDF,
plywood, hardwoods and
hard plastics Two flutes
give a clean finish to
cut edges All cutters
above and including 9.5mm
diameter, have TCT
plunge centre tips
Warranty: 12 months D:6.5
mm C:25 mm OL:57 mm Shank
Diameter:1/4 inch Nett
Weight: 0.012kg Packaged
Size: 118x57x6mm
Availability: In Stock
£18.79
Archived Product
-
Trend 32/10X1/2TC Stair
Trenching Cutter (Shank
Diameter 1/2")
Features: Purpose made
for stair housing jigs
Ensures tight fit of
tread in string Warranty:
12 months D:14 mm C:20 mm
OL:65 mm A:95 degrees
Shank Diameter:1/2 inch
Nett Weight: 0.05kg
Packaged Size:
144x76x14mm
Availability: In Stock
£38.00
Archived Product
-
Trend 33/60X1/2 Arbor
33/60 For 1/4 Bore Tools
(Shank Diameter
1/2") Features:
Standard duty arbor with
1/4 inch spindle and
spacers Enables mounting
of 1/4 inch bore slotters
with and without bearings
in a variety of positions
Use shims/spacers to
prevent bearings with
larger diameters,
touching the tips of the
slotters and also for
accurate spacing
Warranty: 12 months Comes
With: 1 x Arbor 3 x
Spacer 5 mm 3 x Spacer 3
mm OL:76 mm Spigot length
incl thread:34 mm Spigot
thread length:11 mm Shank
Diameter:1/2 inch Nett
Weight: 0.069kg Packaged
Size: 142x76x13mm
Availability: In Stock
£11.66
Archived Product
-
Trend 4/90X1/2TC Two
Flute Cutter 31.7 Mm
Diameter (Shank Diameter
1/2") Features: TCT
for abrasive materials
such as chipboard, MDF,
plywood, hardwoods and
hard plastics Two flutes
give a clean finish to
cut edges TCT plunge
centre tip Warranty: 12
months D:1 1/4 inch
D:31.7 mm C:25 mm OL:67
mm Shank Diameter:1/2
inch Nett Weight: 0.139kg
Packaged Size:
144x76x32mm
Availability: In Stock
£44.45
Archived Product
-
Trend 3/81DCX1/2TC Two
Flute Cutter 12.7 Mm
Diameter (Shank Diameter
1/2") Features: TCT
for abrasive materials
such as chipboard, MDF,
plywood, hardwoods and
hard plastics Two flutes
give a clean finish to
cut edges All cutters
above and including 9.5mm
diameter, have TCT
plunge centre tips TC
tips are ground with
greater clearance for
routing of resinous
material Warranty: 12
months D:1/2 inch D:12.7
mm C:32 mm OL:73 mm Shank
Diameter:1/2 inch Nett
Weight: 0.06kg Packaged
Size: 144x57x13mm
Availability: In Stock
£18.79
Archived Product
-
Trend 46/150X1/2TC TCT
Bearing Guided Ovolo &
Round Over 12.7mm Radius
Features: Ovollo and
rounding over bearing
guided cutters are ideal
for curved work Can be
used on natural timbers,
man-made particles and
fibre boards Popular uses
include edging window
frames, glazing bars,
cabinets, table tops,
pencil rounds, trophies,
shelves and fire
surrounds They can also
be used to produce
bullnose edge moulds Two
bearings Larger bearing
removes the quirk
producing a round over
profile Tooling: T.C.T
1/2in Shank R = 12.7 mm D
= 38 mm C = 19 mm
Bearings = 9.5 and 12.7
mm Net Weight: 0.108kg
Availability: In Stock
£47.26
Archived Product
-
Trend C074X1/4TC Rounding
Over 3.2mm Radius X 9.5mm
Cut (Shank Diameter
1/4") Features:
Self-guiding cutters for
rounding over edges do
not require a side fence
They are supplied with
two bearings Use the
larger bearing for a
round-over If the cutter
is lowered, a top quirk
can be produced Bullnose
mouldings can also be
produced by taking a
second pass from the
opposite side of the
workpiece Warranty: 12
months D:19.0 mm C:3/8
inch C:9.5 mm B:9.5 mm
B2:12.7 mm R:1/8 inch
R:3.2 mm Shank
Diameter:1/4 inch Nett
Weight: 0.03kg Packaged
Size: 144x76x19mm
Availability: In Stock
£19.00
Archived Product
-
Trend C087X1/4TC Roman
Ogee 6.3mm Radius X
22.2mm Cut (Shank
Diameter 1/4")
Features: By raising the
cutter, the top quirk is
removed Warranty: 12
months C:25/32 inch C:20
mm B:9.5 mm R:6.3 mm
Shank Diameter:1/4 inch
Nett Weight: 0.073kg
Packaged Size:
144x76x38mm
Availability: In Stock
£30.00
Archived Product
-
Trend 46/18X1/2TC Bearing
Guided Ovolo Cutter
25.4mm Radius (Shank
Diameter 1/2")
Features: Self-guiding
cutters for rounding over
edges do not require a
side fence They are
supplied with two
bearings Use the larger
bearing for a round-over
If the cutter is lowered,
a top quirk can be
produced A full
round/bullnose for stair
treads can also be
produced by taking a
second pass from the
opposite side of the
workpiece Warranty: 12
months D:63.5 mm C:32 mm
B:9.5 mm B2:12.7 mm
R:25.4 mm Shank
Diameter:1/2 inch Nett
Weight: 0.202kg Packaged
Size: 120x105x105mm
Availability: In Stock
£79.00
Archived Product
-
Trend 46/140X1/2TC TCT
Bearing Guided Ovolo &
Round Over 9.5mm Radius
Features: Ovollo and
rounding over bearing
guided cutters are ideal
for curved work Can be
used on natural timbers,
man-made particles and
fibre boards Popular uses
include edging window
frames, glazing bars,
cabinets, table tops,
pencil rounds, trophies,
shelves and fire
surrounds They can also
be used to produce
bullnose edge moulds Two
bearings Larger bearing
removes the quirk
producing a round over
profile Tooling: T.C.T
1/2in Shank R = 9.5 mm D
= 32 mm C = 16 mm
Bearings = 9.5 and 12.7
mm Net Weight: 0.066kg
Availability: In Stock
£39.00
Archived Product
-
Trend 46/93X1/4TC TCT
Bearing Guided Ovolo &
Round Over 7.9mm Radius
Features: Ovollo and
rounding over bearing
guided cutters are ideal
for curved work Can be
used on natural timbers,
man-made particles and
fibre boards Popular uses
include edging window
frames, glazing bars,
cabinets, table tops,
pencil rounds, trophies,
shelves and fire
surrounds They can also
be used to produce
bullnose edge moulds Two
bearings Larger bearing
removes the quirk
producing a round over
profile Tooling: T.C.T
1/4in Shank R = 7.9 mm D
= 28 mm C = 12.7 mm
Bearings = 9.5 and 12.7
mm Net Weight: 0.054kg
Availability: In Stock
£41.29
Archived Product
-
Trend 46/130X1/2TC TCT
Bearing Guided Ovolo &
Round Over 6.3mm Radius
Features: Ovollo and
rounding over bearing
guided cutters are ideal
for curved work Can be
used on natural timbers,
man-made particles and
fibre boards Popular uses
include edging window
frames, glazing bars,
cabinets, table tops,
pencil rounds, trophies,
shelves and fire
surrounds They can also
be used to produce
bullnose edge moulds Two
bearings Larger bearing
removes the quirk
producing a round over
profile Tooling: T.C.T
1/2in Shank R = 6.3 mm D
= 25.4 mm C = 13 mm
Bearings = 9.5 and 12.7
mm Net Weight: 0.078kg
Availability: In Stock
£38.35
Archived Product
-
Trend 46/02X1/4TC TCT
Roto Tip Bearing Guided
Flush Trimmer 19 x 30mm
Features: Rota-Tip
Cutters are highly
economical for use in
production applications
Manufactured from a
harder grade of Tungsten
Carbide than conventional
tooling Rotated to expose
a new cutting edge
ensuring the diameter of
the tool remains constant
Blades are replaceable
when all edges become
chipped or dull The
Blades are fixed directly
onto the tool bodies
using torx screws and may
be replaced without
removing the cutter from
the router Comes with:
Blade(s) fitted Torx keys
Tooling: T.C.T 1/4in
Shank A Angle = 90
Availability: In Stock
£51.25
Available
-
Trend C209X1/4TC
Intumescent Cutter 10mm x
24mm The Trend C209X1/4TC
is a bearing guided
intumescent strip cutter
for routing the groove
for intumescent strip in
a frame or door. Fitted
with a 1/4 Inch Shank
Features: To suit 4mm
thick strip of 10mm
width. Intumescent strip
is used to create an
effective barrier to both
fire and smoke. Choose
alternative bearings (not
included) to suit other
thicknesses of
intumescent strip.
Microgranular TC tips
ensure perfect sharpness
Highly groundtip face
maintains its edge PTFE
non-stick coated body
Extra long shank Suitable
for all makes of router
Availability: In Stock
£24.00
Archived Product
-
Trend C208X1/2TC
Intumescent Cutter Set
10mm X 40mm (Shank
Diameter 1/2")
Features: For either
frame or door
applications, with
standard Intumescent
Strip. Neatly cuts
grooves on doors or
frames to accept
Intumescent Strip which
enables the formation of
effective barriers to
both fire and smoke. By
using alternative ball
bearings diameters other
seal thicknesses can be
introduced. Alternative
bearings can be purchased
to suit other thicknesses
For 4.0mm thick and
10.0mm width intumescent
strip Warranty: 12 months
D:40 mm C:10 mm B:32 mm
E:4 mm Shank Diameter:1/2
inch Nett Weight: 0.164kg
Packaged Size:
107x67x67mm
Availability: In Stock
£31.95
Archived Product
-
Trend C206X1/2TC Aquamac
63 Recesser 41.3mm
Diameter (Shank Diameter
1/2") Features:
Recessing cutter will
accommodate the Schlegel
Aquamac 63 or Exitex
Aquatex P6 weather strip
system and allows for a
particularly small gap
between sash and frame.
The slot can be
positioned part way down
the side of the rebate,
or at the bottom of the
rebate Warranty: 12
months D:41.3 mm D2:28.3
mm C:4.8 mm C2:2.7 mm
OL:67 mm B:22 mm Shank
Diameter:1/2 inch Nett
Weight: 0.089kg Packaged
Size: 107x67x67mm
Availability: In Stock
£40.00
Available
-
Trend C220X1/4TC
Intumescent Cutter 15mm x
24mm The Trend C220X1/4TC
is a bearing guided
intumescent strip cutter
for routing the groove
for intumescent strip in
a frame or door. Fitted
with a 1/4 Inch Shank
Features: To suit 4mm
thick strip of 15mm
width. Intumescent strip
is used to create an
effective barrier to both
fire and smoke. Choose
alternative bearings (not
included) to suit other
thicknesses of
intumescent strip.
Microgranular TC tips
ensure perfect sharpness
Highly groundtip face
maintains its edge PTFE
non-stick coated body
Extra long shank Suitable
for all makes of router
Availability: In Stock
£25.00
Archived Product
-
Trend S47/70X1/4STC
Economy Trim Cutter
(Shank Diameter
1/4") Features:
Solid Tungsten Carbide
economy cutter For use on
short runs at 90 degree
or 60 degree with Ref.
S47/70, at 90 degree or
83 degrees with Ref.
S47/71 and at 90 degree
or 45 degree with Ref.
S47/72 Will trim and
bevel by changing cutter
height Requires a side
fence or a copy follower
guide on the router
Warranty: 12 months D:1/4
inch D:6.3 mm C:6 mm C2:6
mm OL:32 mm A:60 degrees
A2:90 degrees Shank
Diameter:1/4 inch Nett
Weight: 0.009kg Packaged
Size: 118x57x6mm
Availability: In Stock
£28.00
Archived Product
-
Trend 46/150X1/4TC
Bearing Guided Ovolo
Cutter 12.7mm Radius
(Shank Diameter
1/4") Features:
Self-guiding cutters for
rounding over edges do
not require a side fence
They are supplied with
two bearings Use the
larger bearing for a
round-over If the cutter
is lowered, a top quirk
can be produced A full
round/bullnose for stair
treads can also be
produced by taking a
second pass from the
opposite side of the
workpiece Warranty: 12
months D:38 mm C:19 mm
B:9.5&12.7 mm R:12.7 mm
Shank Diameter:1/4 inch
Nett Weight: 0.066kg
Packaged Size:
144x76x38mm
Availability: In Stock
£43.51
Archived Product
-
Trend 3/5X1/4TC TCT Two
Flute Cutter 9.0mm x 19mm
Features: Two flute
straight cutters produce
a cleaner finish than the
single flute cutters
Suitable for grooving,
rebating, mortising and
drilling Use Tungsten
Carbide tooling when
working with abrasive
materials such as
chipboard, MDF, plywood
and certain hardwoods
Gives a clean finish to
cut edges 1/4in Shank C =
19 mm D = 9 mm 23/64in
Net Weight: 0.021kg
Availability: In Stock
£19.42
Archived Product
-
Trend 3/51X1/2TC TCT Two
Flute Cutter 9.5mm x 32mm
Features: Two flute
straight cutters produce
a cleaner finish than the
single flute cutters
Suitable for grooving,
rebating, mortising and
drilling Use Tungsten
Carbide tooling when
working with abrasive
materials such as
chipboard, MDF, plywood
and certain hardwoods
T.C.T. Tooling 1/2in
Shank C = 32 mm D = 9.5
mm 3/8 in Net Weight:
0.061kg
Availability: In Stock
£23.87
Archived Product
-
Trend 3/50X1/2TC TCT Two
Flute Cutter 9.5mm x 25mm
Features: Two flute
straight cutters produce
a cleaner finish than the
single flute cutters
Suitable for grooving,
rebating, mortising and
drilling Use Tungsten
Carbide tooling when
working with abrasive
materials such as
chipboard, MDF, plywood
and certain hardwoods
T.C.T. Tooling 1/2in
Shank C = 25 mm D = 9.5
mm 3/8 in Net Weight:
0.058kg
Availability: In Stock
£19.42
Archived Product
-
Trend 3/3X1/4TC TCT Two
Flute Cutter 7.0mm x 19mm
Features: Two flute
straight cutters produce
a cleaner finish than the
single flute cutters
Suitable for grooving,
rebating, mortising and
drilling Use Tungsten
Carbide tooling when
working with abrasive
materials such as
chipboard, MDF, plywood
and certain hardwoods
Gives a clean finish to
cut edges 1/4in Shank C =
19 mm D = 7 mm 9/32 in
Net Weight: 0.018kg
Availability: In Stock
£18.95
Archived Product
-
Trend 3/20X1/4TC TCT Two
Flute Cutter 6.3mm x 16mm
Features: Two flute
straight cutters produce
a cleaner finish than the
single flute cutters
Suitable for grooving,
rebating, mortising and
drilling Use Tungsten
Carbide tooling when
working with abrasive
materials such as
chipboard, MDF, plywood
and certain hardwoods
Gives a clean finish to
cut edges 1/4in Shank C =
16 mm D = 6.3 mm 1/4 in
Net Weight: 0.017kg
Availability: In Stock
£16.96
Archived Product
-
Trend 3/11X1/4TC Two
Flute Cutter 3.4 Mm
Diameter (Shank Diameter
1/4") Features: TCT
for abrasive materials
such as chipboard, MDF,
plywood, hardwoods and
hard plastics Two flutes
give a clean finish to
cut edges All cutters
above and including 9.5mm
diameter, have TCT
plunge centre tips
Warranty: 12 months D:3.4
mm C:11 mm OL:51 mm Shank
Diameter:1/4 inch Nett
Weight: 0.01kg Packaged
Size: 118x57x3mm
Availability: In Stock
£14.28
Archived Product
-
Trend 3/08X1/4TC TCT Two
Flute Cutter 12.7mm x
25mm Features: Two flute
straight cutters produce
a cleaner finish than the
single flute cutters
Suitable for grooving,
rebating, mortising and
drilling Use Tungsten
Carbide tooling when
working with abrasive
materials such as
chipboard, MDF, plywood
and certain hardwoods
Gives a clean finish to
cut edges 1/4in Shank C =
25 mm D = 12.7 mm 1/2in
Net Weight: 0.03kg
Availability: In Stock
£19.89
Archived Product
-
Trend 3/08X1/2TC TCT Two
Flute Cutter 12.7mm x
25mm Features: Two flute
straight cutters produce
a cleaner finish than the
single flute cutters
Suitable for grooving,
rebating, mortising and
drilling Use Tungsten
Carbide tooling when
working with abrasive
materials such as
chipboard, MDF, plywood
and certain hardwoods
T.C.T 1/2in Shank C = 25
mm D = 12.7 mm 1/2in Net
Weight: 0.064kg
Availability: In Stock
£19.89
Archived Product
-
Trend 3/02X1/4TC TCT Two
Flute Cutter 6.3mm x 19mm
Features: Two flute
straight cutters produce
a cleaner finish than the
single flute cutters
Suitable for grooving,
rebating, mortising and
drilling Use Tungsten
Carbide tooling when
working with abrasive
materials such as
chipboard, MDF, plywood
and certain hardwoods
Gives a clean finish to
cut edges 1/4in Shank C =
19 mm D = 6.3 mm 1/4in
Net Weight: 0.017kg
Availability: In Stock
£17.42
Archived Product
-
Trend 47/7X1/4TC Combi
Trimmer Cutter 12.7 Mm
Diameter C1=9 C2=4mm
Length (Shank Diameter
1/4") Features: For
trimming top & lip
Economical cutters,
perform 3 functions: 1.
To top trim the overlay
at 90 degrees 2. To trim
the overlay at 45 degrees
or 60 degrees 3. The base
of the cutter can trim
the vertical lipping at
90 degrees Requires side
fence or roller bearing
Warranty: 12 months D:1/2
inch D:12.7 mm C:12.7 mm
A:60 degrees A2:90
degrees Shank
Diameter:1/4 inch Nett
Weight: 0.013kg Packaged
Size: 118x57x13mm
Availability: In Stock
£18.79
Archived Product
-
Trend 24/1X1/2TC Tapered
Plug 1/2 Inch Diameter
(Shank Diameter
1/2") Features: A
Tapered plug ensures an
exceptionally tight fit
is achieved. Tapered plug
cutters with Tungsten
Carbide Tips will produce
many hundreds of plugs
before resharpening is
required. For use in
drilling machines at a
recommended speed of 3000
RPM (max. 6000 RPM).
Material must be well
clamped Warranty: 12
months D:1/2 inch D:12.7
mm C:15 mm Shank
Diameter:1/2 inch Nett
Weight: 0.11kg Packaged
Size: 144x76x13mm
Availability: In Stock
£69.00
Archived Product
-
Trend 24/80X1/4TC TCT
Plug Maker No.8 Features:
Plug cutter Designed to
exactly fit the
counterbored holes
produced by group 62 & 63
Trend cutters Recommended
speed - 1, 000-20, 000
/min TCT for use with
drilling machines or
routers H.S.S 1/4in Shank
C = 9.5 mm D = 16 mm Plug
Body Diameter. 16 mm Net
Weight: 0.037kg
Availability: In Stock
£37.31
Archived Product
-
Trend 46/44X1/4TC TCT
Bearing Guided Rebate
24mm x 12.7mm Features:
Rebate set Includes
different size bearings
for a choice of rebates
They provides easy
setting up and accurate
depth of cut Ideal for
rebating straight and
shaped work pieces
particularly with
delicate applications
such as musical
instrument production
when a small rebate is
required for insertion of
purfling By changing the
bearing the size of the
rebate can be altered
Supplied with 3 bearings:
22.0 mm Bearing gives
rebate of 1 mm 19 mm
Bearing gives rebate of
2.5 mm 16 mm Bearing
gives rebate of 4 mm
Tooling: TCT 1/4in Shank
D = 24 mm C = 12.7 mm Net
Weight: 0.083kg
Availability: In Stock
£47.26
Archived Product
-
Trend 46/902X1/4TC Guided
Profiler 9.5mm Dia X
12.7mm Cut (Shank
Diameter 1/4")
Features: Profiler with
shank mounted bearing
guides For use with
router mounted above or
below a table when
following a template For
profiling and rebating
applications only Not for
plunge cutting/grooving A
3mm maximum overlap
should be left before
trimming They are ideal
for template making
Cutter has a smaller
diameter for tighter
corners and double
bearing guides Warranty:
12 months D1:3/8 inches
D1:9.5 mm C:1/2 inches
C:12.7 mm Overall
length:51 mm B:9.5 mm
A:90 degrees Shank
Diameter:1/4 Nett Weight:
0.016kg Packaged Size:
118x57x10mm
Availability: In Stock
£18.99
Archived Product
-
Trend 24/10X1/4TC TCT
Plug Maker No.10
Features: Plug cutter
Designed to exactly fit
the counterbored holes
produced by group 62 & 63
Trend cutters Recommended
speed - 1, 000-20, 000
/min TC 1/4in Shank Plug
Depth Max. 16mm Plug
Depth Min. 12mm Plug Body
Diameter. 12mm Net
Weight: 0.043kg
Availability: In Stock
£37.31
Archived Product
-
Trend 46/39X1/2TC TCT
Bearing Guided Rebate Set
35mm x 12.7mm Features:
Popular rebate set
Includes different size
bearings for a choice of
rebates They provide easy
setting up and accurate
depth of cut Ideal for
rebating straight and
shaped work pieces By
changing the bearing the
size of the rebate can be
altered Supplied with
four bearings: 19 mm
Bearing gives rebate of
7.9 mm 16 mm Bearing
gives rebate of 9.5 mm
12.7 mm Bearing gives
rebate of 11.1 mm 9.5 mm
Bearing gives rebate of
13.7 mm Tooling: TCT D =
35 mm C = 12.7 mm 1/2in
Shank Net Weight: 0.341kg
Availability: In Stock
£48.95
Archived Product
-
Trend 12/6X1/4TC TCT
Radius Cutter 6.3mm
Radius Features: Used
extensively for routing
edge moulds, face
grooves, columns,
fluting, water slots,
engraving and panel
moulds in products such
as desk tops, fire
surrounds, draining
boards and picture frames
Suitable for use on all
natural timbers and
man-made boards Tooling:
T.C.T 1/4in Shank R = 6.3
mm D = 12.7 mm C = 19 mm
Net Weight: 0.025kg
Availability: In Stock
£36.37
Denmark