United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Power Tool Accessories > Chucks & Adapters
Archived Product
-
Trend SNAP/D/2 Drill
Adaptor 1/16in Bore
Features: The snappy HSS
Drill Bits are gripped by
a spring steel collet
into Hex Shaft Hex shanks
snap into the quick chuck
Gripped by a spring steel
collet into the Hex Shaft
Hex Shaft snaps into the
quick chuck Size: 1/16in
(with collet) Net Weight:
0.021kg
Availability: In Stock
£3.92
Available
-
TTrend SNAP/BH/OT Snappy
One Touch Bit Holder 66mm
The Trend SNAP/BH/OT is a
66mm long magnetic holder
for 25mm insert bits.
Features: One touch quick
and easy release of
insert bit Small 10.3mm
diameter to allow access
into tighter spaces
Pressing the button will
allow the bit to be
sprung forward for easy
removal Tested to 50 Nm
torque Extra strong
magnet N50 (Gauss
3900-4000) to minimise
bit loss due to the bits
sticking to the screw
Stainless steel housing
Availability: In Stock
£7.00
Available
-
Trend SNAP/BH/OT/A Snappy
One Touch Bit Holder
150mm The Trend
SNAP/BH/OT/A is a 150mm
long magnetic holder for
25mm insert bits.
Features: One touch quick
and easy release of
insert bit Small 10.3mm
diameter to allow access
into tighter spaces
Pressing the button will
allow the bit to be
sprung forward for easy
removal Tested to 50 Nm
torque Extra strong
magnet N50 (Gauss
3900-4000) to minimise
bit loss due to the bits
sticking to the screw
Stainless steel housing
Availability: In Stock
£9.00
Archived Product
-
Trend SNAP/QC Quick Chuck
Features: Quick Chuck
Will fit any power drill
that uses a standard 9.5
mm (3/8in) key or keyless
chuck Attachments such as
the snappy range or
direct drive 1/4in
screwdriver bits will
then snap in and out
without a chuck key Has
three flats on the shank
to ensure non-slippage in
the chuck Net Weight:
0.076kg
Availability: In Stock
£11.00
Available
-
Trend SNAP/ASA/2 Trend
Snappy Angle Screwdriver
Attachment Mark 2 (Shank
Diameter 1/4 Hex)
Features: 90 degree
angled screwdriver
attachment allows access
to tight corners Quick
change chuck ensure tool
is held securely Use with
bit holders, direct
drive or insert
screwdriver bits, hex
drills and
drill/countersinks Two
position handle for
maximum control Heat
treated steel precision
gears for maximum torque
Die cast head with ball
bearing guides for
stability. Use in
cordless and corded
drills Can be used with
impact screwdrivers with
following specification -
maximum 12v, maximum
torque 80nm (816 kgf.cm),
rotation 0-2000 rpm and
0-2500 impacts per min
Maximum 60 Nm torque (612
kgf cm) Do not use with
nut drivers Warranty: 12
months Comes With: 1 x No
2 Pozi 50mm screwdriver
bit 1 x No 2 Pozi 25mm
screwdriver insert bit
Availability: In Stock
£28.00
Available
-
Trend SNAP/BH/M/A Snappy
Extra Long Micro Bit
Holder (150 X 10.8mm) The
Trend Snap/BH/M/A Snappy
micro magnetic bit holder
for 1/4-inch hex 25mm
insert bits. This bit
holder is longer than
others in the range with
an overall length of
150mm. Features: Extended
length of shaft at 150mm
long Micro diameter body
Small 10.8mm diameter to
allow access into tighter
spaces Pull back ring to
release bits,
spring-loaded release of
bit Tested to 50 Nm
torque Extra strong
magnet N50 (Gauss
3900-4000) to minimise
bit loss due to the bits
sticking to the screw
Stainless steel housing
Availability: In Stock
£10.00
Archived Product
-
Trend CLT/SLV/8127 Collet
Sleeve 8mm To 12.7mm
Features: Reduction
sleeve is used to reduce
the collet size to take
cutters with smaller
shanks. Should only be
used as a stop-gap, as
the the correct size
collet is recommended.
Should not be used for
extensive periods or
heavy work Warranty: 12
months D:1/2 inch D:12.7
mm OL:30 mm Bore:8 mm
Nett Weight: 0.02kg
Packaged Size:
150x81x25mm
Availability: In Stock
£11.00
Archived Product
-
Makita 194079-2 Quick
Change Chuck 1.5 - 13mm
The Makita 194079-2
Keyless Chuck fit the
following Drills:
BHR261T, HR2310T,
HR2450FT, HR2450T,
HR2470FT, HR2470T,
HR2610T, HR2611THR2810T
and HR2811FT.
Description: Quick change
chuck Chuck Thread: 1/2 x
20UNF Diameter (D): 13 mm
Weight: 0.6kg
Availability: In Stock
£54.00
Archived Product
-
Trend DE6278 Collet 1/2
Elu Mof 98-131-177
Dw625ek Features:
Replacement collet Fits
the following machines:-
Elu MOF112, 31, 77,
98, 131, 177(E) DeWalt
DW624, DW625EK, 629 CMT
1E Warranty: 12 months
d:1/2 inch d:12.7 mm Elu
MOF112, 31, 77, 98,
131, 177(E) DeWalt
DW624, DW625EK, 629
Nett Weight: 0.025kg
Packaged Size:
125x77x17mm
Availability: In Stock
£25.00
Archived Product
-
Trend 33/20X1/2 Arbor For
M12 Bore Groover (Shank
Diameter 1/2")
Features: Slotters with
M12x1.0 threaded bore
enables flush recessing
in the corner such as for
weather proofing Spacers
are supplied to ensure
the minimal threaded
arbor protrudes below the
slotter. Arbor 33/20
enables 12mm bore guide
bearings to be fitted
above slotter for
self-guiding work
Warranty: 12 months Comes
With: 1 x Arbor 4 x
Spacer 2 mm 1 x Spacer 3
mm 1 x Spacer 2 mm OL:61
mm Spigot length incl
thread:20 mm Spigot
thread length:18 mm Shank
Diameter:1/2 inch Nett
Weight: 0.083kg Packaged
Size: 142x76x19mm
Availability: In Stock
£10.92
Archived Product
-
Dewalt DT7002 Jacobs
Keyless Chuck 1.5 - 13mm
The Dewalt DT7002 is a
replacement 13mm keyless
chuck for many corded or
cordless drills with
1/2"-20UNF female
threads Features: Extreme
grip even under the
toughest loads Suitable
for cordless or corded
drills Clamping range: 1
- 13 mm Female thread:
1/2"-20 UNF
Availability: In Stock
£6.00
Archived Product
-
Makita P-63725 MAKLOK
Quick Change Chuck SDS+
Adapter Features: Quick
change chuck which
operates by simply
retracting the external
sleeve to change
screwdriver bits For use
with 50mm bits
Application:
Screwdriving, cabinet
making, joinery,
assembly, fixings,
appliances, automotive
Contents: 1 x MakLok
Chuck with SDS Shank
which takes 1/4" Hex
Shank Accessories
Please note: For use in
drilling mode only, do
not use in percussion
mode Shank: 6.35 / 1/4
Hex
Availability: In Stock
£3.20
Available
-
Sealey AK49252 Bit Holder
Quick Chuck 300mm
Features: Chrome Vanadium
steel quick release
adaptor suitable for use
with 1/4" hex drive bits
Simply push the colour
sleeve to release bit
Features 265mm extended
shaft, ideal for
applications in hard to
reach areas Comes With:
Life Warranty
Availability: In Stock
£8.00
Archived Product
-
Metabo Quick LTX Angle
Drilling and Screwdriving
Attachment Features:
Makes easy work of
drilling and
screw-driving in confined
spaces Spindle with
hexagon recess for
screwdriver bits Suitable
for clockwise and
anticlockwise rotation
Gear ratio 1:1 Locating
bore:
Availability: In Stock
£45.00
Available
-
Trend SNAP/BH/M Snappy
66mm Magnetic Bit Holder
The Trend SNAP/BH/M
Snappy 66mm Magnetic Bit
Holder is designed for
micro bit holders with
small 10.8mm diameter
body and spring locator
for positive securing of
bit. Features: Micro
diameter body Small
10.8mm diameter to allow
access into tighter
spaces Pull back ring to
release bits,
spring-loaded release of
bit Tested to 50 Nm
torque Extra strong
magnet N50 (Gauss
3900-4000) to minimise
bit loss due to the bits
sticking to the screw
Stainless steel housing
Availability: In Stock
£7.50
Archived Product
-
Trend SNAP/HKLC/6 Keyless
Chuck Features: Keyless
chuck Can be used in
quick chucks and impact
drivers to hold parallel
shank drills bits up to
1/4 inch Clamping
capacity 0.8 mm (1/32
inch) to 6 mm (1/4 inch).
Enhanced gripping power
when compared to
traditional key type
drill chucks Lightweight
with plastic body Fitted
with Snappy shank 1/4
inch hex shank adaptor
Shank diameter: 1/4 inch
hex Capacity: 0.8 mm to 6
mm Net Weight: 0.156kg
Availability: In Stock
£14.00
Available
-
Metabo 626724000 Geared
Chuck with SDS-Plus
Adapter and Chuck Key The
Metabo 626724000 is an
all metal SDS+ Chuck with
a capacity for drills
from 1.5mm - 13mm. Sold
in a cardboard box with a
Chuck Key. Features:
Geared chuck: 1.5 - 13mm;
1/2" - 20 UNF; SDS-plus
adapter with 1/2" - 20
UNF male thread, chuck
key For use on rotary
hammers with SDS-Plus
holder; for clamping
cylindrical drill bits,
tools with cylindrical
shaft
Availability: In Stock
£13.00
Available
-
Makita P-33788 SDS-Plus
Keyless Adapter Chuck
Features: Designed for
usage in conjunction with
an SDS-Plus Hammer Drill
Please note: When using
conventional drill bits,
make sure Hammer Drill
action is switched off
your Drill to prevent
drill bit breakage
Availability: In Stock
£20.00
Archived Product
-
Dewalt DT7002 Keyless
Chuck 1.5 - 13mm (Jacobs)
with DT7030 SDS Plus
Chuck Adapter 1/2" x
20 UNF This combination
of 13mm jacobs chuck and
SDS+ adapter is perfect
for turning your SDS+
hammer drill into a
standard drill with 13mm
chuck DT7002 Chuck
Features: Extreme grip
even under the toughest
loads Suitable for
cordless or corded drills
DT7030 SDS Adapter
Features: Gives the user
the ability to put on an
alternative chuck Chuck:
Clamping range: 1 - 13 mm
Female thread:
1/2"-20 UNF Adapter:
Thread: 1/2"-20 UNF
Availability: In Stock
£8.95
Denmark