United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Corded Power Tools > Die Grinders
Archived Product
-
Bosch GGS16 Straight
Grinder, complete with 2
open-ended spanners and
an 8mm collet The most
powerful model from Bosch
with collet clamping.
Features: Powerful
900-watt motor Suitable
for all grinder tools
with shank diameter of 6,
8, 10 mm and 1/4"
Particularly precise true
running due to collet
clamping Other
Advantages:
Heat-insulating handle
sleeve for good guidance
Switch-on lock against
inadvertent activation
Cut-out carbon brushes
Good handling, also for
left handers Comes with:
Open-ended spanner KW 22
Open-ended spanner KW 14
8mm collet Tools:
Grinding points for min.
45 m/s to 50 mm diameter
Availability: In Stock
£299.95
Archived Product
-
Metabo GE710L - 710W High
Speed Straight Grinder
The GE710 L is the latest
generation of straight
grinders from Metabo.
This high speed
industrial quality
straight grinder with its
very slim and light
weight design boast a
raft of features GE710L
Features: Spindle lock
for simple change of
tools Removable
protective rubber nose
grip for comfortable and
safe working Variable
speed electronics Restart
protection Thermal
overload protection
Metabo S-Automatic safety
shutdown: if the tool
jams, the power supply
is disconnected
immediately and auto stop
carbon brushes to protect
the motor No load speed:
10, 000-30, 500 rpm Rated
input power: 710 W Output
power: 430 W Collet bore
of collet chuck: 6 mm
Weight (without mains
cable): 1.6Kg
Availability: In Stock
£145.00
Archived Product
-
Metabo GE710L - 710W High
Speed Straight Grinder
The GE710 L is the latest
generation of straight
grinders from Metabo.
This high speed
industrial quality
straight grinder with its
very slim and light
weight design boast a
raft of features GE710L
Features: Spindle lock
for simple change of
tools Removable
protective rubber nose
grip for comfortable and
safe working Variable
speed electronics Restart
protection Thermal
overload protection
Metabo S-Automatic safety
shutdown: if the tool
jams, the power supply
is disconnected
immediately and auto stop
carbon brushes to protect
the motor No load speed:
10, 000-30, 500 rpm Rated
input power: 710 W Output
power: 430 W Collet bore
of collet chuck: 6 mm
Weight (without mains
cable): 1.6Kg
Availability: In Stock
£145.00
Archived Product
-
Metabo GE710 Compact
Straight Grinder 240 Volt
Industrial Quality with
Variable Speed
Electronics The GE710
Compact is the latest
generation of straight
grinders from Metabo.
This industrial quality
straight grinder with its
very slim and light
weight design boast a
raft of features,
features include,
variable speed
electronics, restart
protection, thermal
overload protection,
Metabo S-Automatic safety
shutdown: if the tool
jams, the power supply
is disconnected
immediately and auto stop
carbon brushes to protect
the motor. Features:
Vario-Constamatic (VC)
full-wave electronics
Metabo S-automatic safety
shutdown: If the tool
jams, the power supply
is disconnected
immediately Restart
protection Thermal
overload protection Very
slim and light design
Hardened and ground
collet chuck for precise
concentricity of tools in
use Robust Metabo
Marathon motor Auto-stop
carbon brushes Suitable
for actuating flexible
shafts Comes With: Collet
6 mm 2 open-jawed
spanners Idle revolution:
13.000 - 34.000 /min
Rated input power: 710 W
Output power: 430 W
Revolutions at rated
load: 24.000 /min Collet
bore of the collet chuck:
6 mm Weight (without
power cable): 1, 4 kg
Availability: In Stock
£129.00
Archived Product
-
Hitachi GP2S2 25mm
(31/32") Die Grinder
Features: Powerful motor
with high grinding speed
All ball bearing
construction Compact and
slim housing easy to grip
Internal carbon brush
Comes with: Wrenches Side
Handle Capacity: Collet
Chuck: 6mm (or 1/4")
Capacity: Max. Wheel
Diameter: 25mm
(31/32") Power
Input: 520W No Load
Speed: 29, 000/min.
Overall Length: 359mm
(14-1/8") Weight:
1.7kg (3.8lbs.)
Availability: In Stock
£119.95
Archived Product
-
Makita GD0800C Die
Grinder High Speed 750W,
complete with 6mm Collet
Cone & 2 Wrenches New
high powered die grinder
with the most efficient
dust proof construction
and a max. 8 mm collet
capacity. This high speed
versatile grinder is
ideal for grinding and
sharpening in confined
spaces thanks to it's
streamlined shape.
Producing 750W, the
highest power in it's
class, within a palm
fitting slim body. With a
Zig Zag and powdered
varnish coating on
armature and field to
assure high durability
and protect against
grinding dust. The
bearings are also
protected from dust by
the tools labyrinth
construction. Features: 8
mm collet capacity Slim
body for grinding in
tight spots Makita's
exclusive Super Joint
System prevents kick-back
Double Insulated
Electronic Speed Control
Soft Start Comes with:
6mm Collet Cone 2 x
Wrench Makita SJS: Makita
SJS (Super Joint System)
instantly disengages the
motor power drive if the
accessory is snagged. The
"clutch"
eliminates the risk of
the machine being forced
out of the operators
hands if the accessory
stops and also protects
the machine motor from
overload and damage. No
load speed 7000 - 28000
rpm Input wattage 750 w
Collet capacity 8 mm
Vibration K factor 1.5
m/sec
Availability: In Stock
£214.00
Available
-
Makita GD0800C Die
Grinder High Speed 750W,
complete with 6mm Collet
Cone & 2 Wrenches New
high powered die grinder
with the most efficient
dust proof construction
and a max. 8 mm collet
capacity. This high speed
versatile grinder is
ideal for grinding and
sharpening in confined
spaces thanks to it's
streamlined shape.
Producing 750W, the
highest power in it's
class, within a palm
fitting slim body. With a
Zig Zag and powdered
varnish coating on
armature and field to
assure high durability
and protect against
grinding dust. The
bearings are also
protected from dust by
the tools labyrinth
construction. Features: 8
mm collet capacity Slim
body for grinding in
tight spots Makita's
exclusive Super Joint
System prevents kick-back
Double Insulated
Electronic Speed Control
Soft Start Comes with:
6mm Collet Cone 2 x
Wrench Makita SJS: Makita
SJS (Super Joint System)
instantly disengages the
motor power drive if the
accessory is snagged. The
"clutch" eliminates the
risk of the machine being
forced out of the
operators hands if the
accessory stops and also
protects the machine
motor from overload and
damage.
Availability: In Stock
£203.00
Available
-
Makita GD0600 400W Die
Grinder with paddle
switch, complete with
hex wrench The Makita
GD0600 has been developed
with the design concept
of "Easy-to-handle die
grinder", featuring;
Paddle type On/Off switch
and easy-to-grip small
circumference housing.
Features: Ergonomically
designed slim body for
grinding in tight spots
Internal labyrinth
construction seals motor
and bearings from
contamination Double
insulation Comes with:
Hex wrench
Availability: In Stock
£90.00
Available
-
Makita GD0600 400W Die
Grinder with paddle
switch, complete with
hex wrench The Makita
GD0600 has been developed
with the design concept
of "Easy-to-handle die
grinder", featuring;
Paddle type On/Off switch
and easy-to-grip small
circumference housing.
Features: Ergonomically
designed slim body for
grinding in tight spots
Internal labyrinth
construction seals motor
and bearings from
contamination Double
insulation Comes with:
Hex wrench
Availability: In Stock
£90.00
Available
-
Makita GD0810C Die
Grinder 110 volts only,
complete with 6mm collet
cone & 2 x wrench The
Makita GD0810C Die
Grinder is ideal for
professional heavy duty
work. Rugged, but slim
aluminum gear housing is
convenient especially for
debarring
difficult-to-reach spots
of material. Thanks to
dial speed control, an
optimum speed can be set
for grinding/cutting
hard/soft materials, and
the speed is maintained
under load. Also features
our new "Super Joint
System-SJS" for more
durability of collet and
coupling. Features:
Double Insulated Soft
start Variable speed
control via dial
Electronic speed control
gives constant speed when
the tool is under load
Ergonomically designed
slim body for grinding in
tight spots Makita's
exclusive Super Joint
System helps prevent
kickback Internal
labyrinth construction
seals motor and bearings
from contamination 8 mm
collet capacity Comes
with: 6mm Collet Cone 2 x
Wrench
Availability: In Stock
£219.00
Archived Product
-
Bosch GGS28C Straight Die
GrinderBosch straight
grinders are universal
tools that are used
wherever small deburring
or grinding work needs to
be done. Their compact
size and low weight sit
comfortably in your hand
especially when working
in hard to reach
areas.Features:
Powerful 600w motor for
longer service life and
fast work progressCompact
and ergonomic design for
fatigue free grindingSoft
start for greater control
and increased carbon
brush lifeConstant
Electronic for constant
speed even under heavy
loadKickBack Stop detects
any tooling jam and shuts
down the grinder
immediatelyMotor Cooling
System: additional air
inlets in the back and
big air inlets in the
front of the tool give a
high overload
capabilityEquipped with
Auto-cut-off carbon
brushes for maximum motor
protectionDouble-sealed
ball bearings for longer
service life timeHardened
and ground collet chuck
for longer lifetime,
more precision and higher
safetyImproved grommet
prevents cord
breakageImproved fixation
of tooling with increased
clamping depth for a
stronger grip and better
resultsLocksmiths, ship
builders, machine
builders or metalworkers,
as well as stonemasons
and farmers use these
tools for grinding work,
deburring welded seams,
chamfering, rounding
edges and sharpening
metal objects. Upgrade
this Bosch GGS-28C to a 3
year warranty if
registered within 4 weeks
at boschpowertools.co.uk
Rated Power Input:
600WRated Power Output:
350WCollet diameter: Up
to 8mmNo-load speed: 28,
00 rpmSpindle collar
diameter: 43mmMax wheel
diameter: 50mmGear
housing: MetalAuto cut
off carbon brushes:
YesMotor Power: 600 WNo
load speed: 28, 000
rpmMax. wheel point
diameter: 50 mmKickBack
stop: YesConstant
Electronic: YesNet Weight
1.4 kg
Availability: In Stock
£145.95
Archived Product
-
Metabo GE 950 G Plus Die
Grinder The Metabo GE 950
G Plus is a aluminium
bodied grinder with
especially high torque,
ideal for grinding inner
and outer surfaces in
combination with flap
wheels (not supplied).
The Grinder has a
powerful 950W motor which
has a no load speed of up
to 8700rpm. Sold in both
110V and 240V models with
4 metres of cable in a
cardboard carton.
Features: High torque and
compact design thanks to
robust planetary gear
Spindle lock for simple
change of tools Aluminium
die-cast bearing flange
for long service life of
the machine
Vario-Constamatic (VC)-
Electronics for work with
materials requiring
customised speeds, which
remain almost constant
under load Thumbwheel for
Speed Preselection
Electronic safety
shutdown of the motor for
safe working in case the
tool stops unexpectedly
Restart protection:
prevents unintentional
start-up after power
supply interruption
Electronic overload
protection for long
service life Precise
collar for stationary use
Removable protective
rubber cap for
comfortable and safe
working Slim design for
ideal handling Precision
collet for precise
concentricity Metabo
Marathon motor with
patented dust protection
for long service life
Comes With: Collet 6 mm
Protective rubber cap
Side handle 1 Open-jawed
spanner No-load speed:
2500 - 8700 rpm Rated
input power: 950 W Output
power: 510 W Revolutions
at rated load: 7200 rpm
Collar diameter: 43 mm
Collet chuck bore: 6 mm
Cable length: 4 m
Vibration: Surface
grinding (25 mm): 2.5 m/s
Availability: In Stock
£160.00
Archived Product
-
Metabo GE710 Plus Die
Grinder Long Nosed 710W
This die grinder comes
complete with a very good
5 piece carbide set to
get you up and running
with a number of grinding
tasks. GE710 Plus
Features: Long grinding
spindle - ideal for
working on hard to reach
places Spindle lock for
simple change of tools
Aluminium die-cast
bearing flange for long
service life of the
machine Vario-Constamatic
(VC)-Electronics for work
with materials requiring
customised speeds, which
remain almost constant
under load Thumbwheel for
speed preselection
Electronic safety
shutdown of the motor for
safe working in case the
tool stops unexpectedly
Restart protection:
prevents unintentional
start-up after power
supply interruption
Electronic overload
protection for long
service life Precise
collar for stationary use
Removable protective
rubber cap for
comfortable and safe
working Slim design for
ideal handling Precision
collet for precise
concentricity Metabo
Marathon motor with
patented dust protection
for long service life
Comes with: Collet 6mm
Protective rubber cap
Open jaw spanner Carbide
bit set No-Load Speed 10,
000 - 30, 500 rpm Rated
Input Power 710 W Output
Power 430 W Revolutions
at Rated Load 24, 000 rpm
Collar Diameter 1 11/16
" Collet Chuck Bore
0.2362 " Weight
(without power cable) 3.5
lbs Cable Length 13 ft
Contents of bit set: 1 x
9.6 x 19 x 64 mm,
cylinder/ B-shape 1 x 9.6
x 19 x 64 mm, radius
end/ C-shape 1 x 9.6 x 8
x 54 mm, sphere/ D-shape
1 x 9.6 x 16 x 60 mm,
ellipse/ E-shape 1 x 9.6
x 19 x 64 mm, pointed
arch/ G-shape
Availability: In Stock
£179.00
Available
-
Metabo GE 950 G Plus Die
Grinder The Metabo GE 950
G Plus is a aluminium
bodied grinder with
especially high torque,
ideal for grinding inner
and outer surfaces in
combination with flap
wheels (not supplied).
The Grinder has a
powerful 950W motor which
has a no load speed of up
to 8700rpm. Sold in both
110V and 240V models with
4 metres of cable in a
cardboard carton.
Features: High torque and
compact design thanks to
robust planetary gear
Spindle lock for simple
change of tools Aluminium
die-cast bearing flange
for long service life of
the machine
Vario-Constamatic (VC)-
Electronics for work with
materials requiring
customised speeds, which
remain almost constant
under load Thumbwheel for
Speed Preselection
Electronic safety
shutdown of the motor for
safe working in case the
tool stops unexpectedly
Restart protection:
prevents unintentional
start-up after power
supply interruption
Electronic overload
protection for long
service life Precise
collar for stationary use
Removable protective
rubber cap for
comfortable and safe
working Slim design for
ideal handling Precision
collet for precise
concentricity Metabo
Marathon motor with
patented dust protection
for long service life
Comes With: Collet 6 mm
Protective rubber cap
Side handle 1 Open-jawed
spanner No-load speed:
2500 - 8700 rpm Rated
input power: 950 W Output
power: 510 W Revolutions
at rated load: 7200 rpm
Collar diameter: 43 mm
Collet chuck bore: 6 mm
Cable length: 4 m
Vibration: Surface
grinding (25 mm): 2.5 m/s
Availability: In Stock
£160.00
Available
-
Metabo GEP 710 Plus -
Long Nosed Straight
Grinder 710W The Metabo
GEP 710 Plus has a long
grinding spindle - ideal
for working on hard to
reach places. Fitted with
a 6mm Collet and runnning
on a powerful 710W
Marathon Motor thee
grinder gives a no load
speed of up to 30,
500rpm. The machine comes
in 110V and 240V
versions, supplied with
a spanner in a cardboard
box. Features: Paddle
switch with deadmans
function: safe to operate
due to an ergonomically
integrated non-slip
switch Spindle lock for
simple change of tools
Aluminium die-cast
bearing flange for long
service life of the
machine Vario-Constamatic
(VC)- Electronics for
work with materials
requiring customised
speeds, which remain
almost constant under
load Thumbwheel for Speed
Preselection Electronic
safety shutdown of the
motor for safe working in
case the tool stops
unexpectedly Restart
protection: prevents
unintentional start-up
after power supply
interruption Electronic
overload protection for
long service life Precise
collar for stationary use
Removable protective
rubber cap for
comfortable and safe
working Slim design for
ideal handling Precision
collet for precise
concentricity Metabo
Marathon motor with
patented dust protection
for long service life
No-load speed: 10000 -
30500 rpm Rated input
power: 710 W Output
power: 430 W Revolutions
at rated load: 24000 rpm
Collar diameter: 43 mm
Collet chuck bore: 6 mm
Cable length: 4 m
Vibration: Surface
grinding: 5.6 m/s
Availability: In Stock
£199.99
Denmark