The 8 Pin Dock Station offers easy access to a USB (Universal Serial Bus) port for charging & syncing your iPhone 5. Simply connect
...The 8 port HDMI splitter distributes 1 HDMI source to 8 HDMI displays simultaneously. It offers HD video solution for super markets,
...The 8 port HDMI splitter distributes1 HDMI source to 8 HDMI displays simultaneously. It offers HD video solution for super markets, shopping Malls, Home HDTV/STB/DVD/Projector /DVR dystems, data control center, information distribution, conference
The 8 port HDMI splitter distributes 1 HDMI source to 8 HDMI displays simultaneously. It offers HD video solution for super markets, shopping Malls, Home HDTV/STB/DVD/ Projector /DVR dystems, data control center, information distribution, conference room presentation, education & training, corporation showroom, luxurious house, etc.
SPECIFICATIONS
Input Video Signal
0.5-1.0voltsp-p
Input DDC Signal
5voltsp-p(TTL)
Max Single, Link Range
1920×1200, 1080P
HDMI
480i/576i/480p/576p/720p/1080i/1080P
DVI
480p/576i/576p/720i/720p/1080i/1080p
HDMI Version
HDMI1.3
Bandwidth
Upto 225 M Hz
EDID Duration
12seconds
Power supply
DC 5V / 3A
CONNECTION & OPERATION
1). Connect HDMI source & displays into the Splitter.
*please refer to the Connection Image.
2). Connect the DC 5V/2A power supply into the splitter. Make sure you can not connect a power supply with voltage higher than 5V, or the splitter may get damaged.
3). Turn on the power switch.
4). When all input & outputs are connected & turned on, the corresponding LED will light.
* Attention:
In order to protect the splitter & your devices, please don't turn on the power switch of the splitter before input source & output displays are attached in, make sure the
splitter is powered off before you insert & extract HDMI cables,
& please insert & extract HDMI cables gently.
INTERFACE SPECIFICATONS:
1). Power switch 2) HDMI input LED
3) HDMI output LED 4) HDMI output
5) HDMI input 6 ) Power Supply Socket
FAQ:
1). The splitter doesn’t appear to be functioning.
Check if the LED lights, the power supply is connected & the power switch is turned on. Make sure all cables are well connected, & in good condition. You’re encouraged to try different cables on the splitter. Make sure the system of connecting the input source to the displays directly works well.
2). The LED doesn’t light.
Make sure you use the accessory power supply of the splitter. Power supply connected with voltage higher than 5V may damage the splitter.
3) If the maximum resolution of the four displays is not the same, what resolution will be displayed?
In order to make sure each display works normally, the splitter will display at the lowest resolution.
CONNECTION IMAGE: